Sears 74291 User Manual

!

I

e STAR'I"

CONTROL

OPERATINGSTATUS

SYMBOLS

_Jl LINT SCREEN

B SAFETY DOOR

SWITCH

1_ ERFORMANCE

GUIDE LABEL

_DEL NO. PLATE

m m m

If you need SERVICE or PARTS for your Kenmore dryer:

Be ready to give your Sears Service Department the model number, serial number and date of
purchase. Write in below. The plate i¢1with model and serial numbers is located behind the

dryerdoor.

iii

,.1tO. [ M

MODEL NO. SERIAL NO.

I

DATE OF PURCHASE

ELECTRIC

MODEL 64291

GAS

MODEL 74291

How to dry a load of laundry

b/_ Clean lint screen before each load.

Put laundry into dryer and shut

the door.

[_) ush the StartControl Ill1to start

I! |l

Ill Cycle Selector Control

Use this control to select the proper drying method for the type of
items in the load. The control can be set for Timed Drying or Air.

You can turn the control at any time to make drying time longer
or shorter or you can turn the control to an OFF position to shut

the dryer off.

Set Cycle Selector Control Ill.

your dryer.

il Start Control

Use this controlto start the dryer. Be sure the door is closed.
Opening the door stops the dryer. It will not startagain until you

close the door and push the START control. Be sure the Cycle
Selector Control is on a dry setting.

OPERATING STATUS SYMBOI__
Color coordinated keys indicate in which portion of the cycle the

dryer is operating.

Remove load when dry.

Part No. 3392338