Sears 721.36078600 Repair Services
MODEL: 721.36078600
Repair services
America’s repair specialists
SEARS KENMORE UPRIGHT
VACUUM CLEANER
MODEL 721.36078600
2
CONTENTS
1. SAFETY PRECAUTIONS
................................................................................
3
2. CAUTIONS
.......................................................................................................
3
3. DESCRIPTION/ATTACHMENTS/SPECIFICATIONS
......................................
4
...................................
18-21
4. DISASSEMBLY
.............................................................................................
5-9
5. REPLACEMENT INSTRUCTIONS
...........................................................
10-12
6. REMOVING CLOG
.........................................................................................
13
7. TROUBLE SHOOTING
.............................................................................
14-16
8. WIRING DIAGRAM ........................................................................................17
9. EXPLODED VIEW/REPLACEMENT PARTS LIST
BEFORE SERVICING THE UNIT, READ THE "SAFETY PRECAUTIONS" IN
THIS MANUAL.
MODEL 721.36078600
MECHANICAL SERVICE INFORMATION
TABLE OF CONTENTS
3
SAFETY PRECAUTIONS
CAUTIONS
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND
OBSERVE EACH POINT CAREFULLY.
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT
THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
1. Motor exchange
1) Separate the Body Cover and Body Base by
unfastening the screws.
2) After disconnecting the lead wires, replace the
old motor with a new one.
2. In case of exchanging other parts, refer to the
exploded view.
1. Filter
1) The filter is composed of a motor safety filter, a
exhaust filter and a paper bag.
2) Never use the vacuum cleaner without filters. It
may harm the motor.
NOTE : Re-use of the motor safety filter.
Never wash the filter in a washing machine or in
a dishwasher.
Never use hot water for washing the filter.
Re-use the filter after drying it completely in the
shade.
Do not dry near fire or direct sun ray.
2. Avoid sucking such materials as :
1) Liquid or wet dust :
Clogs the ventilation holes, reduces the suction
power significantly and harms the motor.
2) Inflammable liquids such as benzene, alcohol or
solvents.
3) Burning objects such as cigarette butts.
4) Bulky objects such as vinyl, paper etc.
5) Sharp objects such as needles, pins, metal or
glass particles etc.
3. Attachments
1) Dusting Brush and Crevice Tool :
For cleaning any crevice, inside corners of
window frames.
For delicate vacuuming of fabrics on the
furniture, curtains, etc.
2) Upholstery Tool : for vacuuming the dust on the
upholstery.
4. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's carelessness may cause damage to
the cleaner or injure persons.
5. Air exhausted from the vacuum cleaner is
normally warm. But if extraordinarily hot air is
exhausted, check if the hose or dust bag is
clogged or not.
6. Electric shock could occur if used outdoors or
on wet surfaces.
MODEL 721.36078600
4
DESCRIPTION
SPECIFICATIONS
ATTACHMENTS
Dusting Brush Upholstery Tool Extension Wand Crevice Tool
• POWER SOURCE : ON NAMEPLATE
• POWER CONTROL : ON/OFF SWITCH ON BODY
• CAPACITY : 5
l
• CORD LENGTH: 7.7m
• NET WEIGHT: 7.7kg
• PACKING WEIGHT : 7.7kg
• NET DIMENSION :
364 x 1164 x 361 (W x D x H)mm
•
PACKING DIMENSION :
370 x 870 x 245 (W x D x H)mm
• ATTACHMENTS
DUSTING BRUSH............................................. 1EA
UPHOLSTERY TOOL ....................................... 1EA
EXTENSION WAND.......................................... 1EA
CREVICE TOOL................................................ 1EA
Handle
Hose Holder
On/Off Switch
Dust Cover
Exhaust Panel
Height Adjustment
Knob
Bumper
Light
Power Cord
Motor Protector
Extension
Wand
Quick Release
Cord Hanger
Lower
Cord Hanger
Hose
Agitator
Floor Nozzle
Crevice Tool
E-Z Belt Check
Pedal
Dusting Brush/
Upholstery Tool
MODEL 721.36078600
5
Step 1: Disassembling handle
and cord hanger.
Remove screw and pull out the handle.
Full out the cord hanger forward strongly to remove.
DISASSEMBLY
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical
shock or personal injury from the vacuum cleaner suddenly starting.
MODEL 721.36078600
6
Step 2: Disassembling hose
Remove the lower end of hose from the cleaner.
Press the release hook on the pipe connector and
pull the hose forward. (Fig.B)
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical
shock or personal injury from the vacuum cleaner suddenly starting.
B
B
Hose
Connector
A
A
MODEL 721.36078600
7
MODEL 721.36078600
Step 3: Disassembling floor
nozzle of the cleaner (agitator,
belt assembly, etc.)
Lower handle to lay vacuum body flat.
Using a coin to turn the latches and remove nozzle cover.
Lift the right end of the agitator and then the left end.
Remove the belt from motor shaft.
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical
shock or personal injury from the vacuum cleaner suddenly starting.
Agitator
Belt
Nozzle
Cover
Latches
Loading...