Sears 46L5200U, 24L4200U, 32L4200U, 19L4200U, 40L5200U User Manual

...

Integrated High Definition LED Television User’s Guide:

19L4200U 24L4200U 32L4200U

If you need assistance:

Toshiba's Support Web site

Call Toshiba Customer Support Center:

Within the United States at (800) 631-3811

Outside the United States at (949) 583-3050

For more information, see “Troubleshooting” on page 120 in this guide.

Owner's Record

The model number and serial number are on the back and side of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV

Model number: ______________________________________________

Serial number: _______________________________________________

Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an overthe-air High Definition TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, contact your TV antenna installer, cable provider, or satellite provider

40L5200U 46L5200U 50L5200U

support.toshiba.com

GMA300009010 1/12

Dear Customer,

Thank you for purchasing this Toshiba LED TV. This manual will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this manual completely.

WARNING

To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 26) on page 4.

WARNING: If you decide to wall mount this

television, always use a mounting bracket that has been Listed by an independent laboratory (such as UL, CSA, ETL) and is appropriate for the size and weight of this television. The use of inappropriate or non-Listed mounting brackets could result in serious bodily injury and/or property damage. See “To

Display your LED TV using a Wall Bracket:” on page 5.

NOTE TO CATV INSTALLERS

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the U.S. NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see 33) and

34) on page 4.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

The Issue

• The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommen

Tune Into Safety

•

One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of d

• Remember that children can become excited while watching a program, especially on a “larger than life” flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be p

ulled or grabbed by curious children.

• Flat panel displays that are inappropriately situated on dressers,

bookcases, shelves, desks,

speakers, chests or carts may fall

over and cause injury.

TOSHIBA Cares!

• The consumer electronics industry is committed to making home

entertainment enjoyable and safe.

rawers.

Wall Mounting: If you decide to wall mount your flat panel display, always:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer about p installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are requir

ed for installation. Flat panel

displays can be heavy.

dations.

rofessional

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)

Only use attachments/accessories specified by the manufacturer.

12)

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)

Unplug this apparatus during lightning storms or when unused for long periods of time.

14)

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Precautions

14a)

CAUTION: If the TV is dropped and the cabinet or enclosure surface has been damaged or the TV does not operate normally, take the following precautions:

• ALWAYS turn off the TV and unplug the power

cord to avoid possible electric shock or fire.

• NEVER allow your body to come in contact with

any broken glass or liquid from the damaged television. The LCD panel inside the TV contains

glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and contact your doctor immediately.

• ALWAYS contact a service technician to inspect the TV any time it has been damaged or dropped.

15)

CAUTION:

• To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

• To prevent electric shock, match wide blade of plug to wide slot; fully insert.

16)

CAUTION:

• Do not let children swallow any small parts included on or with the product or play with the plastic bag. Keep the small parts and the plastic bag out of the reach of children.

17)

CAUTION:

• Do not let water or other liquids come into contact with the product, as it may result in damage.

18)

WARNING:

• To prevent the spread of fire, keep candles or other open flames away from this product at all times.

• Keep the product away from direct sunlight, fire or a heat source such as a heater. This may reduce the product lifetime or result in fire.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

19)

20)

ALWAYS plug the product into an outlet that is located in such a manner that it can be easily unplugged in case the product requires service.

21)

NEVER route the product’s power cord inside a wall or similar enclosed area.

22)

Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

23)

Never place the TV on an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

WARNING: NEVER expose the batteries to excessive heat such as sunshine, fire, or the like.

DANGER: RISK OF SERIOUS PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE!

24)

When selecting a location for the TV,

• NEVER allow any part of the TV to hang over the edge of the supporting furniture,

• NEVER place the TV on tall furniture (for example, entertainment centers or bookcases) without anchoring both the furniture and the TV to a suitable support,

• Never place cloth or other material between the TV and the supporting furniture.

• NEVER allow children to climb on the TV

25)

To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.

26)

Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Sturdy strap (as short as possible)

4" min.

TV side TV top

27)

The product shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

28)

Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV. Leave a space of at least 4 (four) inches around the TV.

29)

Always leave a space of at least 4 (four) inches around the TV. The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

30)

Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

31)

Never overload wall outlets and extension cords.

32)

Always operate this equipment from a 120V AC, 60 Hz power source.

33)

Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

Hook

34) DANGER: RISK OF SERIOUS

• Use extreme care to make sure you are never in

• Never attempt to install any of the following

PERSONAL INJURY OR DEATH!

a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

35)

If you use the TV in a room whose temperature is 32° F (0° C) or below, the picture brightness may vary until the LED warms up. This is not a sign of malfunction.

36)

37)

WARNING: RISK OF SERIOUS

PERSONAL INJURY, DEATH, OR EQUIPMENT DAMAGE!

• Never use chemicals (such as air fresheners, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combined effects of chemical agents and mechanical stress (such as the weight of the TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal.

• Always unplug the TV before cleaning. Gently wipe the display panel surface (the TV screen) using a dry, soft cloth (cotton, flannel, etc.). A hard cloth may damage the surface of the panel. Avoid contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.

Never hit, press, or place anything on the back cover. These actions will damage internal parts.

38)

WARNING:

RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the TV cabinet slots.

39)

During a lightening storm, do not touch the connecting cables or product.

40)

For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

41)

Always unplug the TV to completely disconnect from mains power. When the TV is turned off using the on/off switch, it is not completely disconnected from power and a minute amount of current is still consumed.

42)

During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Provider.

43)

44) •

Service

45)

46)

WARNING: RISK OF SERIOUS

PERSONAL INJURY OR EQUIPMENT DAMAGE!

Never strike the screen with a sharp or heavy object.

The LCD screen of this product can be damaged by ultraviolet radiation from the sun. When selecting a location for the television, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.

• Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 36), on page 4.

WARNING:

RISK OF ELECTRIC SHOCK!

Never attempt to service the TV yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Provider.

If you have the TV serviced:

• Ask the service technician to use only replacement parts specified by the manufacturer.

• Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

Choosing a location for your LED TV

To Display your LED TV on the included Pedestal Stand:

Observe the following safety precautions:

Read and follow the pedestal assembly instructions included with the pedestal. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below.

Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel.

Place the TV on a sturdy, level surface that can support the weight of the TV.

Be sure to secure the TV to a wall, pillar, surface, or other immovable structure see item 26) page 4 for additional details.

To Display your LED TV using a Wall Bracket:

If you decide to wall mount your LED TV, always use a wall bracket Listed by an independent laboratory (such as UL, CSA, ETL) that is appropriate for the size and weight of the TV:

CAUTION: Two people are required for installation.

Unplug and remove any cables and/or other component connectors from the rear of the TV.

Remove the screws of the VESA Mounting Pattern show in the table below. CAUTION: Do not use the screws removed from the back cover to attach the wall mount bracket to the TV.

Always use the screws supplied or recommended by the wall mount manufacturer.

Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV, as described below.

VESA Mounting Pattern

TV Size Hole Pattern (HxV) Screw Size

19” 100mm x 100mm M4

24” 100mm x 100mm M4

32” 100mm x 200mm M4

40” 400mm x 400mm M8

46” 400mm x 400mm M8

50” 400mm x 400mm M6

(unit in mm)

Removing the Pedestal Stand

Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

Remove the screws shown in the below diagram. This will allow removal of the pedestal stand.

Once you have removed the screws holding the pedestal stand in place, remove the pedestal stand from the TV.

19”/24” TV

VESA Mounting Pattern

Four screws

32” TV

VESA Mounting Pattern

40”/46”/50” TV

VESA Mounting Pattern

Four screws

CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor.

Hook Sturdy strap (as short as possible)

Four screws

Hook Sturdy strap

(as short as possible)

FCC Declaration of Conformity Compliance Statement (Part 15):

Toshiba 19L4200U, 24L4200U, 32L4200U, 40L5200U, 46L5200U, 50L5200U Television models

comply with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: Toshiba America Information Systems, Inc. 9740 Irvine Blvd., Irvine, CA 92618. Ph: 800-631-3811

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user's authority to operate this equipment.

ENERGY STAR® User Information

ENERGY STAR User Information Statement: the factory default settings of this television meet ENERGY STAR requirements. Changing Picture Settings may increase energy consumption, possibly beyond the limits required for ENERGY STAR qualification. To ensure your television is operating at optimal energy efficiency, select [Home] mode during initial activation. To return to [Home] mode settings, select [Standard] picture mode. [Standard] mode is recommended for normal home use.

ENERGY STAR that earn the ENERGY STAR prevent green house gas emissions by meeting strict guidelines set by the U.S. Environmental Protection Agency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

qualified TV. Products

Important notes about your TV

The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.

An afterimage (ghost) may appear on the screen if a fixed, non-moving image appears for a long period of time. The afterimage is not permanent and will disappear in a short period of time.

The LCD panel contained in this TV is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.

Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV.

Trademark Information

•

ClearFrame, CableClear, ColorStream, DynaLight, GameTimer, SurfLock are trademarks or registered trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

•

Audyssey EQ® provides clear, accurate,

and natural sound right out of the box.

audio experience as much as your video.

frequency monitoring to extend the range and bass of small speakers. This enables the system to produce lower frequencies than would be possible with a traditional system of the same size.

commercials, and between the loud and soft passages of movies.

•

Manufactured under license from Audyssey Laboratories, Inc. U.S. and foreign patents pending. Audyssey EQ Dynamic Volume trademarks of Audyssey Laboratories, Inc.

symbol are trademarks of Dolby Laboratories.

•

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

•

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

•

This technology ensures you enjoy your

•

Audyssey ABX™ technology uses

sophisticated driver analysis and low

•

Audyssey Dynamic Volume® automatically adjusts volume to provide a consistent sound level between television programs,

, Audyssey ABX™, and Audyssey

are registered and licensed

•

Manufactured under license from Dolby Laboratories. Dolby and the double-D

This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

Notice

The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

Chapter 1: Introduction.............................................................. 15

Features ..................................................................16

Overview of installation, setup, and use..................17

TV front and side panel controls and

connections ......................................................18

TV back panel connections .....................................19

Chapter 2: Connecting Your TV................................................ 21

Overview of cable types ..........................................21

Coaxial (F-type) cable ......................................21

Standard A/V cables (red/white/yellow) ............22

Component video cables (red/green/blue) ........22

HDMI

Optical audio cable............................................23

Analog RGB (15-pin) computer cable ...............23

3.5mm Stereo to RCA Y-cable ..........................23

About the connection illustrations ....................23

cable

(with HDMI Logo) .......................................22

Contents

Connecting a VCR, antenna, cable TV, or

camcorder.........................................................24

Connecting a DVD player with ColorStream®

(component video), and a satellite receiver.......25

Connecting an HDMI® or DVI device to

the HDMI® input................................................28

HDMI®-CEC connection ..........................................31

Connecting a digital audio system ..........................33

Connecting an analog audio system .......................35

Connecting a computer...........................................35

Connecting a computer to the TV’s

PC IN terminal.............................................35

Connection to the TV’s HDMI® terminal............37

Chapter 3: Using the Remote Control...................................... 40

Installing batteries ..................................................40

Remote control effective range ...............................41

Learning about the remote control..........................42

Chapter 4: Menu Layout and Navigation ................................. 45

Main menu layout ...................................................45

Setup/Installation menu layout ...............................47

Navigating the menu system...................................47

Chapter 5: Setting up your TV................................................... 49

Initial Setup.............................................................49

Storing channels in memory (optional)...................51

Auto Tuning ......................................................51

Setting channel skip................................................54

Setting the AV input mode ......................................55

Setting the HDMI

Viewing the digital signal meter ..............................56

Setting the time zone ..............................................57

Viewing the system status ......................................57

Resetting Factory Defaults ................................58

audio mode...............................55

Contents

Chapter 6: Using the TV’s features........................................... 59

Selecting the video input source .............................59

Labeling the video input sources ............................61

Tuning channels using the Channel Browser ..........64

Favorites browser .............................................65

Elements of the Channel Browser .....................66

Adding and clearing channels and inputs

in the History List........................................68

Tuning to the next programmed channel ..........68

Tuning to a specific channel (programmed

or unprogrammed) .....................................69

Switching between two channels using

Channel Return ...........................................69

Switching between two channels using

SurfLock™ ..................................................69

Selecting the picture size ........................................70

Full....................................................................71

TheaterWide 1...................................................72

TheaterWide 2...................................................72

TheaterWide 3...................................................73

Native................................................................73

4:3 ....................................................................74

Normal..............................................................74

Dot by Dot.........................................................74

Scrolling the TheaterWide

(TheaterWide 2 and 3 only)...............................75

Using the Auto Aspect feature.................................76

Selecting the cinema mode.....................................77

Using the FREEZE feature .......................................77

Adjusting the picture...............................................78

Selecting the picture mode ...............................78

Adjusting the picture quality .............................79

Using closed captions.............................................80

Base closed captions ........................................80

Digital CC settings.............................................81

picture

Contents

CC Selector .......................................................82

Adjusting the audio .................................................83

Muting the sound..............................................83

Using the digital audio selector.........................83

Selecting stereo/SAP broadcasts ......................84

Adjusting the audio quality................................85

Audyssey ABX™ ...............................................86

Using Dynamic Volume (Audyssey Dynamic

Volume®) ....................................................86

Selecting the optical audio output format .........86

Using the Dolby® Digital Dynamic Range

Control feature ............................................87

Using the Locks menu ............................................87

Entering the PIN code .......................................88

Forgotten PIN code ...........................................89

Changing or deleting your PIN code .................89

Using parental controls (for USA region)................89

Blocking TV programs and movies by

rating (V-Chip) ............................................89

Downloading an additional rating system .........90

Displaying ratings .............................................93

Blocking TV programs by Canada rating...........93

Unlocking programs temporarily ......................95

Using the input lock feature ....................................95

Locking channels ....................................................96

Using the GameTimer®.....................................97

Using the panel lock feature..............................97

Using the PC settings feature..................................98

Setting the PC Audio.........................................99

Using the Media Player .........................................100

Auto Start function..........................................101

To open the Media Player ...............................101

Viewing photo files .........................................103

Playing music files..........................................104

Viewing photo files and playing music

files at the same time................................105

Contents

Sorting photo or music files ...........................106

Setting the sleep timer ..........................................107

Automatic Power Down ........................................108

No Signal Power Down .........................................108

Using HDMI®-CEC.................................................109

HDMI®-CEC playback device (DVD

player, etc.) control...................................109

Other HDMI®-CEC functions ...........................111

Setting up HDMI®-CEC....................................112

Displaying TV status information ..........................112

Understanding the last mode memory feature ......113

Chapter 7: Using the TV’s Advanced Features ...................... 114

Using the advanced picture settings .....................114

Dynamic Contrast ...........................................114

Static Gamma .................................................115

Color temperature...........................................115

ClearFrame™ (L5200U Series)........................116

Film Stabilization (L5200U Series)..................117

CableClear® digital Noise Reduction ...............118

MPEG Noise Reduction...................................118

Game Mode ....................................................119

Chapter 8: Troubleshooting.....................................................120

General troubleshooting........................................120

Picture problems ..................................................121

Sound problems ...................................................123

Remote control problems .....................................123

Channel tuning problems......................................124

Closed caption problems ......................................124

Rating blocking (V-Chip) problems.......................124

No HDMI®-CEC operation .....................................125

HDMI

Media Player problems .........................................125

If the problem persists after trying the

problems...................................................125

solutions .........................................................125

Contents

Appendix A: Specifications...................................................... 126

Television system .................................................126

Channel coverage..................................................126

Power source........................................................127

Power maximum current ................................127

Power consumption........................................127

Audio power....................................................127

Speaker type .........................................................128

Video/audio terminals ...........................................128

Video/audio input............................................128

ColorStream® (component video)

HD input....................................................128

HDMI® input ...................................................128

Digital audio output.........................................128

PC input ..........................................................128

Dimensions...........................................................129

Mass (weight).................................................129

Operating conditions.......................................129

Supplied accessories ............................................130

Acceptable signal formats for PC IN, HDMI®........130

PC IN signal formats.......................................130

HDMI® signal formats.....................................130

Appendix B: License Agreement.............................................132

Index..........................................................................................136

Chapter 1

NOTE

Introduction

Safety icons

This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows:

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Provides important information.

Features

The following are just a few of the many exciting features of your new Toshiba wide screen, integrated HD, LED TV:

❖ Integrated digital tuning (8VSB ATSC and QAM)—

❖ 1366 x 768 output resolution 19L4200U, 32L4200U.

❖ 1920 x 1080 output resolution 24L4200U, 40L4200U,

❖ Three HDMI

❖ ColorStream

❖ Digital Audio Out—Optical audio connection with Dolby

❖ CableClear

❖ PC IN (Analog RGB)—Computer terminal, see “Connecting

❖ HDMI

❖ ClearFrame

❖ Media Player—Allows you to view photo files and play music

❖ ENERGY STAR

Introduction

Fe at u re s

Eliminates the need for a separate digital converter set-top box (in most cases).

46L5200U, and 50L5200U.

(L5200U Series)

Two H D M I

—Digital, High-Definition Multimedia Interfaces with 1080p input support. See “Connecting an HDMI® or DVI device to

the HDMI® input” on page 28

and shared composite video input, see “Connecting a DVD

player with ColorStream® (component video), and a satellite receiver” on page 25

Digital optical output form. “Connecting a digital audio

system” on page 33

“CableClear® digital Noise Reduction” on page 118.

a computer to the TV’s PC IN terminal” on page 35.

TV remote via HDMI

on page 109.

see “ClearFrame™ (L5200U Series)” on page 116.

files, see “Using the Media Player” on page 100.

(L4200U Series)

HD—High-resolution component video input

—digital picture Noise Reduction, see

-CEC—Allows control of external devices from the

connection, see “Using HDMI®-CEC”

120 Hz anti-blur feature (for L5200U Series),

qualified.

Overview of installation, setup, and use

Follow these steps to set up your TV and begin using its many exciting features.

1 Carefully read the important safety, installation, care, and

service information. Keep this manual for future reference.

2 To choose a location for the TV:

❖ Read “Important notes about your TV” on page 7.

❖ Place the TV on the floor or a sturdy, level, stable surface

that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure, see 25) on page 4.

❖ Place the TV in a location where light does not reflect on

the screen.

❖ Place the TV far enough from walls and other objects to

allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.

3 Do not plug in any power cords until after you have connected

all cables and devices to your TV.

4 Before connecting cables or devices to the TV, learn the

functions of the TV’s connections and controls, see “Overview

of cable types” on page 21.

5 Connect your other electronic device(s) to the TV, see

“Connecting an HDMI® or DVI device to the HDMI® input” on page 28.

6 Install the batteries in the remote control, see “Installing

batteries” on page 40.

7 See “Learning about the remote control” on page 42 for an

overview of the buttons on the remote control.

8 After connecting all cables and devices, plug in the power

cords for your TV and other devices. Then press the POWER button on the TV control panel or remote control to turn on the TV. If the TV stops responding to the buttons on the remote control or TV control panel and you cannot turn the TV off or on, unplug the power cords for a few seconds and then plug them in and try again.

9 See “Navigating the menu system” on page 47 for a quick

overview of navigating the TV’s menu system.

Introduction

TV front and side panel controls and connections

10 Program channels into the TV’s channel memory, see “Au to

Tuning” on page 51.

11 For details on using the TV’s features, see chapters 6 and 7.

12 For help, refer to “Troubleshooting” on page 120.

13 For technical specifications, see “Specifications” on page 126.

14 For the End User License Agreement, see “License

Agreement” on page 132

TV front and side panel controls and connections

Left side panel TV front

TV top

(Sample Illustration) L4200U Series front and side panel controls and connections

Left side panel TV front

TV top

(Sample Illustration) L5200U Series front and side panel controls and connections

1 Power On/Standby LED—Power indicator light, (glows

green when the TV power is On).

2 Remote sensor (embedded)—Point the remote control toward

this remote sensor.

Introduction

TV back panel connections

3 POWER—Turns the TV On/Off. If the TV stops responding

to the buttons on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for a few seconds to reset the TV.

4 ARROWS /// —When a menu is onscreen, these

buttons function as up/down/left/right menu navigation buttons.

5 MENU (ENTER)—Accesses the on-screen menus. When a

menu is displayed, this button also functions as the ENTER button.

6 EXIT—Instantly closes an onscreen menu.

7 CHANNEL / —When no menu is onscreen, these buttons

change the channel (programmed channels only, see “Storing

channels in memory (optional)” on page 51).

8 VOLUME buttons / —When no menu is onscreen, these

buttons adjust the volume level.

9 INPUT—Changes the source you are viewing. Press

repeatedly to change from one source to the next.

10 USB port (L5200U Series)—Accesses JPEG or MP3 files, or

updates TV firmware.

TV back panel connections

For explanations of cable types and connections, see “Overview of

cable types” on page 21.

(Sample Illustration) L4200U Series back panel connections

NOTE

Introduction

TV back panel connections

Power Cord

(Sample Illustration) L5200U Series back panel connections

1 PC IN—Connects a personal computer.

2 HDMI

IN—High-Definition Multimedia Interface input

receives digital audio and uncompressed digital video from an

HDMI device. HDMI

device or uncompressed digital video from a DVI

connection is necessary to receive 1080p

signals.

3 PC/HDMI-1 (Audio) IN—PC audio input terminal is shared

with an HDMI-1 analog audio input terminal, and its use can be configured in the Audio Setup menu, see “Setting the PC

Audio” on page 99.

4 ANT/CABLE—Antenna input that supports analog (NTSC)

and digital (ATSC) off-air antenna signals and analog and digital cable TV (QAM) signals.

5 Digital AUDIO OUT—Optical audio output in Dolby

Digital or PCM (pulse-code modulation) format for connecting an external Dolby Digital decoder, amplifier, or home theater system with optical audio input.

6 ANALOG AUDIO OUT—Analog audio outputs for

connecting an audio amplifier.

7 ColorStream

HD—High-resolution component video input

and shared composite video input, see “Connecting a DVD

player with ColorStream® (component video), and a satellite receiver” on page 25.

8 USB port—Accesses JPEG or MP3 files, or updates TV

firmware.

Component/Standard (composite) video cables carry only video information; separate audio cables are required for a complete connection.

Chapter 2

Connecting Your TV

Overview of cable types

Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/video devices.

Coaxial (F-type) cable

(Sample Illustration) Coaxial cable

Coaxial (F-type) cable connects your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV.

NOTE

Connecting Your TV

Overview of cable types

Standard A/V cables (red/white/yellow)

(Sample Illustration) Standard AV cables

Standard A/V cables (composite video) usually come in sets of three, and connects to video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.

Component video cables (red/green/blue)

(Sample Illustration) Component video cables

Component video cables come in sets of three and connects with video devices with component video output. (ColorStream Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.

Component video cables provide better picture quality than composite video cables.

HDMI® cable (with HDMI Logo)

(Sample Illustration) HDMI® cable

HDMI devices that have an HDMI digital audio and video in its native format. Separate audio cables are not required, see “Connecting an HDMI® or DVI device to the

HDMI® input” on page 28.

(High-Definition Multimedia Interface) cable connects to

output. An HDMI® cable delivers

HDMI® cables provide the best audio and picture quality.

NOTE

Optical audio cable

(Sample Illustration) Optical audio cable

Optical audio cable connects receivers with Dolby (pulse-code modulation) optical audio input to the TV’s Digital Audio Out terminal, see “Connecting a digital audio system” on

page 33.

Analog RGB (15-pin) computer cable

(Sample Illustration) Analog RGB (15-pin) computer cable

Analog RGB (15-pin) computer cable connects a computer to the to the TV’s PC IN terminal, see “Connecting a computer” on page 35.

Connecting Your TV

Overview of cable types

Digital or PCM

Separate audio cables are required.

3.5mm Stereo to RCA Y-cable

(Sample Illustration) 3.5mm Stereo to RCA Y-cable

3.5mm Stereo to RCA Y-cable connects an audio signal from DVI device to TV.

About the connection illustrations

You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s User's Guide.

Connecting Your TV

Connecting a VCR, antenna, cable TV, or camcorder

Camcorder

From Cable TV or antenna

VIDEO

AUDIO

OUT

TV back panel

Stereo VCR

VIDEO AUDIO

(Sample Illustration) L4200U Series—Connecting to a VCR, antenna, or cable TV or camcorder

Camcorder

TV back panel

From Cable TV or antenna

Stereo VCR

CH 3 CH 4

OUT

Cable box

CH 3 CH 4

IN from ANT

OUT

(Sample Illustration) L5200U Series—Connecting to a VCR, antenna, or cable TV or camcorder

Items needed:

❖ Coaxial cables

❖ Standard AV cables

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

❖ Standard audio cables

Connecting Your TV

NOTE

Connecting a DVD player with ColorStream® (component

When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV.

When you use ColorStream appropriately.

To view the antenna or cable signal: Select ANT/CABLE video input source on the TV.*

To view basic and premium cable channels:

Turn Off the VCR. Select the ANT/CABLE video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the cable box output is set to). Use the cable box controls to change channels.

To view the VCR or camcorder video: Turn On the VCR or camcorder video. Select VIDEO input source on the TV.*

*To select the video input source, press the INPUT button on the remote control, see “Selecting the video input source” on page 59.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

HD or Video, switch AV input mode

Connecting a DVD player with ColorStream® (component video), and a satellite receiver

TV back panel

AUDIO

OUT

Satellite

COMPONENT VIDEO

S-VIDEO

Satellite receiver

(Sample Illustration) L4200U Series—Satellite receiver with component video or DVD player with component video

VIDEO

OUT

DVD player

COMPONENT VIDEO

OUT

AUDIO

NOTE

Satellite

Connecting Your TV

Connecting a DVD player with ColorStream® (component

ColorStream® and composite video cables cannot be connected simultaneously.

TV back panel

Satellite Receiver

AUDIO

OUT

COMPONENT VIDEO

S-VIDEO

(Sample Illustration) L5200U Series—Satellite receiver with component video or DVD player with component video

Items needed:

❖ Coaxial cables

❖ Standard AV cables

❖ Standard audio cables

❖ Component video cables

VIDEO

OUT

If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only.

❖ You can connect the component video cables (plus audio

cables) from the DVD player or satellite receiver to the COLOR STREAM HD terminal in the TV. The COLOR STREAM HD terminal can be used to display Progressive

(480p, 720p) and Interlaced (480i, 1080i) scan systems. Please note that 1080p is not supported. Check the User’s Guide of the DVD player in order to determine the best output signal available.

DVD player

COMPONENT VIDEO

OUT

AUDIO

Connecting Your TV

NOTE

Connecting a DVD player with ColorStream® (component

❖ If your DVD player or satellite receiver does not have

component video, connect a standard A/V cable to the AUDIO/VIDEO terminal. If your DVD player has

HDMI

to the HDMI® input” on page 28.

When you use ColorStream® HD or Video, switch AV input mode appropriately.

To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the ColorStream input source on the TV.*

To view satellite programs using the component video connections:

Turn ON the satellite receiver. Select the ColorStream input source on the TV.*

To view the VCR or view and record antenna channels:

Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream DVD.

*To select the video input source, press the INPUT button on the remote control, see “Selecting the video input source” on page 59.

video, see “Connecting an HDMI® or DVI device

HD video

HD video input source on the TV* to view the

NOTE

Connecting Your TV

Connecting an HDMI® or DVI device to the HDMI® input

The HDMI® input on your TV receives digital audio and uncompressed digital video from an HDMI uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High- Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D– compliant

[1]

consumer electronic devices (such

as a set-top box or DVD player with HDMI

The HDMI

input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see “HDMI® signal formats” on page 130.

Supported Audio format: Linear PCM, sampling rate 32/44.1/48 kHz.

To connect a computer to the HDMI® input, see “Connection to the

TV’s HDMI® terminal” on page 37.

source device, or

or DVI output).

To connect an HDMI (type A connector) per HDMI

❖ For proper operation, it is recommended that you use an

❖ HDMI

HDMI

cable with the HDMI® Logo ( ).

cables transfer both video and audio. Separate analog

device, you will need one HDMI® cable

device.

audio cables are not required (see illustration). See “Setting the

HDMI® audio mode” on page 55

TV back panel

Playback device

(Sample Illustration) L4200U Series—HDMI® connections

Connecting Your TV

Connecting an HDMI® or DVI device to the HDMI® input

TV back panel

Playback device

(Sample Illustration) L5200U Series—HDMI® connections

To view the HDMI

device video:

Select HDMI 1, HDMI 2, or HDMI 3 (for L5200U Series) video input source on the TV. (Press the INPUT button on the remote control. For more information, see “Selecting the video input

source” on page 59.)

To connect a DVI device, you will need:

❖ HDMI

to DVI adapter cable

For proper operation, the length of an HDMI

to DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

❖ 3.5mm Stereo to RCA Y-cable

An HDMI

to DVI adapter cable transfers video only. Separate

analog audio cables are required (see illustration).

Connecting Your TV

Connecting an HDMI® or DVI device to the HDMI® input

For more information, see “Setting the HDMI® audio mode”

on page 55

TV back panel

Playback device

(Sample Illustration) L4200U Series—DVI connections

TV back panel

Playback device

(Sample Illustration) L5200U Series—DVI connections

+ 109 hidden pages