Specifications and Main Features
- Model Numbers: 247.795860, 247.795861
- Horsepower: 8.0
- Displacement: 19.44 cu. in.
- Fuel Capacity: 1 Gallon (Unleaded)
- Spark Plug (Gap .030 in.): Champion J19LM (or Equivalent)
- Magnetron® Ignition Air Gap: .0125 in.
- 3 Cutting Stages
- Equipped with internal combustion engine
- Safety features that comply with ANSI safety standards
Frequently Asked Questions
Q: What type of fuel should I use for the chipper-shredder?
A: Clean, fresh, lead free grade automotive gasoline is best, do not use Ethyl or high octane gasoline.
Q: How do I stop the engine?
A: You can stop the engine when the engine shut off switch is moved to the OFF position and spark plug wire is disconnected.
Q: What is the diameter of the maximum materials to be fed into the hopper assembly?
A: Small branches and leafs not exceeding half an inch in diameter is optimal with a maximum of 1 inch of diameter.
Q: What should I do if I notice that the discharge area is clogged?
A: You must stop the engine, then you may disconnect the spark plug wire and manually clean the area as described in the manual.
Q: How often should I look for the oil level?
A: Oil level should be checked before every usage and roughly after every five hours of operation.
User Manual
Loading...