A: High quality detergent oil rated with API service classification SF, SG or SH, SAE 30 oil should be used.
A: Connect the spark plug wire to the spark plug. Depress the priming bulb five times, grasp the blade control handle and pull the recoil starter and the engine should start.
A: Make sure the blade control handle is in the engaged position then ensure that the spark plug wire has been fitted on. Check also that there is fresh gasoline in the fuel tank.
A: The oil should be changed every 25 hours of use, but at least once in each season.
A: The height at which the cut is made can be altered by the height adjustment levers located on each of the four wheels.