Sears 113.29003 User Manual
i i
ASSEMBLY, OPERATING INSTRUCTIONS
AND PARTS LIST FOR
CRAFTSMAN ACCRAaARM
10 INCH RADIAL SAW
wMODEL NUMBER 113.29003
The Model Number will be found on a plate attached to your saw,
at the left side of the base. Always mention the Model Number in all
correspondence regarding the CRAFTSMAN ACCRA-ARM RADIAL SAW
or when ordering repair par_.
HOW TO ORDER REPAIR PARTS
All parts listed herein may be ordered through SEARS, ROEBUCK AND
CO. or SIMPSONS-SEARS LIMITED. When ordering parts by mall from
the mail order house which serves the territory in which you live, selling
prices will be furnished on request or parts will be shipped at prevailing
prices and you will be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING
INFORMATION AS SHOWN IN THIS LIST:
1. The PART NUMBER 3. The MODEL NUMBER 113.29003
2. The PART NAME 4. The NAME of Item--RADIAL SAW
COAST TO COAST NATION-WEDE,
SERVICE FROM SEARS
FOR YOUR CRAFTSMAN ACCRA-ARM RADIAL SAW
SEARS, ROEBUCK AND CO. and
SIMPSONS-SEARS LIMITED in Canada
back up your investment with quick,
expert mechanical service and genu-
ine CRAFTSMAN replacement parts.
If and when you need repairs or serv-
ice, call on us to protect your invest-
ment in this fine piece of equipment.
I
SEARS, ROEBUCK AND CO.- U. S. A.
IN CANADA, SIMPSONS_,SEAR5 L_MITED
'CRAFTSMAN ACCRA-ARIVL, |(_INCH RADIAL SAW, MODEL NO. I "_;_._:_003
31
/
a,i i
FOR PARTS LIST--SEE PAGE 3
Figuro W
2
CP_SP/L_N ACCP_-AP._ 10_RNCH RADIAL SAW, MODEl. NO. 113.29003
_d_ part_ illu_ted in Figures 1 through 4 and listed under part numbers may be ordered through any Sears mfall or
teal! order store. Order parts by mail from the mall order store which serves the territory in which you live. In several
B_'tances part numbers are listed for COMPLETE ASSEMBUESo AI! parts are shipped prepaid w_in the I_m_ of the ¢an_
finentol United States.
WHEN ORDERING REPAIR PARTS ALWAYS GIVE THE FOLLOWING INFORMATION:
I. THE PART NUMBER.
2. THE PART NAME.
3. THE MODEL NUMBER 113.29003.
4. THE NAME OF ITEM--RADIAL SAW.
Do not use Ref. Numbers when ordering Repair Parts, always use Part Numbers.
FIGURE I PARTS LIs'r
Ref. No. Part Non
1 30469
2 30470
3 5.1374
,4 30472
5 30473
6 5.602
7 5.1243
8 S-1385
9 30474
10 S-1336
11 5.1255
12 30475
13 5-1337
14 30476
15 30671
16 5-1393
17 5-127
18 30479
19 30661
20 5-1342
21 30662
22 30482
* Standard hardware ffem -- may be purchased locally.
"/"Stock item- may be secured through the Hardware Department_ of most Sears
Molt Order Houses.
_'Pan Hd Type 23 Screw 6-32 x 1/4 25 30484
Description Ref. No. Part No.
Adapter Plug 23 5.1266
Cord with Plug 24 30483
Cord Clamp 26 30485
Cover Plate Assembly 27 30704
*Pan Hd Moch ,Screw 10-32 X 3/8 28 30654
_Pan Hd Mach Screw 6-32 x 1/4 29 30655
_Fiber Washer .140 x _250 x 1/32
Indicator #I 32 30491
_Fil Hd Mach Screw I/4-28x 1 33 5-t265
*Med Lock Washer I/4 SAE 34 304?2
Radial Arm Cap 35 5-1387
_Pan Hd Tyloe B Sheet Metal 5crow
#8 x 3/4"" 36 30493
Radla| Arm 37 5.1216
Column Tube Assembly 38 30494
*Hex Hd Cap screw 3/8-16x3/4 39 9-3240
elnternal Shakeproof Lockwasher 12-20
Arm Latch 41 3540
Brake Shoe 42 9,3247
*Socket Hd Cap ,Screw5/16-18 x 5/8 43 9-3220
Arm Lock Screw 44 30496
Arm Lock Pin 45 9.29007
30 30489
31 30490
40 30495
46 9-2536
Description
*Pan Hd Mach Screw 8_32x5/16
Sw_h Key
Switch Cover
Switch
Trim
Arm Latch Shah Assemb|y
Retaining Ring
Spring Support Washer
Arm Latch Spring
Trim C¢_p
*Pan Hd Moth Screw 10-32x3/4
Handle
*Truss Hd Mach Screw 1/4-20 x 1-7/8
with Lockwasher
Wing Nut
*Steel Washer 11/32 x 7/8 x 1/16
Collar
tl0" Kromedge Chisel Tooth Saw
Blade
Shaft Nut
Arbor Wrench
tDado Set
tMordlng Cutter Head
Shaft Wrench
tMotding Cutter Guard
1Work Light
or Slmpsons- Sear_ Retail Stores or
NOTE: Shipping and handling charges for _tandard hardware items (identified by*) such as nuts, s_crew_,washers, etco
make buying these items by mall uneconomical. To avoid sblpptng and handling charges, you may obtain most
of these locally.
l
FaGURE
1Ref.Hoe Part No.
1 5-1346
2 S-1284
3 5-1255
4 5-t258
5 30497
6 5-1216
7 5-1343
8 5-1347
9 30498
10 $-1214
11 30501
12 30499
13 30500
14 30502
15 S-1348
16 S-1349
17 30503
18 S-1350
19 30672
20 30673
21 30674
* Standard hardware item- may be purchased to¢olly_
De_r_i:_on Ref. No. Part No,
*Rd Hd Mace Screw I/4-20x7/8 22 30509
_'Steel Washer 17/64 x 5/8 x 1/32 23 30510
*Med Lock Washer I/4 5AE 2.4 5-1353
*Hex Nut 1/4-20x7/t6x3!16 25 30511
Channel 26 30512
*Steel Washe_ 11/32x7/8_I/16 27 5-1354
*Med Lock Washer 5/16 5AE 28 30676
*Hex Hd Mace Screw 5/16-18 X 1/2 30 30678
Adjusting Screw 31 30515
_Steel Washer 17/64 x 1/2 x 1/32 32 5-1355
Table Clamp 33 30516
Front Table 34 S-1356
Fence 35 30675
Table Spacer Board 36 5-1389
_Hex Nut 3/8-16 x 9/16 x 21/64 37 30518
Med Lock Washer 3/8 SAE 38 30517
Rear Tab|e 39 5-1359
*Hex Hd Mace Screw 3/B-16 x 1-1/8 40 5-1358
Column Support 41 S-1375
Sac Set Screw 42 30604
Column Tube Key 43 30718
PARTS LIIST
29' 3O5O8
.Description
End t_lay Washer #8 (as re€I'd)
E|evatlon ShaFt Be=rlng Bracket
+He× Hd Moch Screw 1/4-20x 3/4
Piv_ Pin
l],earing Bracket
_Hex Hd Mace Screw 3/8.16 x 5/8
Base Assembly
Elevation Crank Shaft Assembly
Elevation Shaft Assembly
Retaining Plate
+Hex Hc_ Mock Sc_re_ 5116-18x7/8
Retaining Ring
tSteel Washer .515 x 7/7 x 1/32
Stud Fastener
"Sac Set Screw 1/4-20x3/8
Elevation Crank Assembly
Nameplate
*Hex Hd Mace S_rew 10-32 x 3/8
_Med Lock Washer #10 SAE
_'5teel Washer 13/64 x 7/16 x t/16
Oil Sling Washer
Plug
4
........... , u,,,, ,, ,. i i,,,,.............
Figure 3 "_-SS
FIGURS :_ PARTS LIST
Ref. blo_ Part No. Description Ref. No. Part No.
1 30519 Swivel Latch Pin Handle 32 30690
2 5-1361 *Hex Hd Mach 5<:rew 5/16-16 x 1-I/2 33 30548
3 30679 RetainingPlate 34 30547
4 5-1343 *Med Lock Washer 5/16 SAE 35 30546
5 30521 Swivel Latch Sp_ing 36 30505
6 30657 Swivel Latch Pin 37 5-1390
7 5-1392 *Steel Washer .328 x 3/4 x 1/16 38 30.567
8 30680 BailRetainer 39 30566
9 30524 Carriage BallRace, ImP1hand 40 30618
10 30527 Ball 41 30565
11 30682 Speed Nut 42 30691
12 5-1363 *Hex Hd Math Screw 5/16-18 x 2-1/4 43 30660
13 30683 Rip Scale Indicator 44 5-1366
14 30684 Carriage Cover, left hand 45 S-1255
15 30685 Eccentric Bushing Sc.mw 46 30562
16 30686 Eccentric Bushing 47 30692
17 30536 Carriage Lock Knob Assembly 48 30558
18 30687 Carriage Lock Shoe 49 30557
19 30681 Ball Retainer, r'_ghl hand 50
20 30615 Carrlage Ball Race, right hand 51 30663
21 30688 Carriage Cover, right hand 52 30556
22 5-1394 *Pan Hd Math Screw 8-32x3/8 53 30606
23 30538 Saw Guard Assembly 54 30664
24 30539 Discharge Elbow 55 30551
25 30540 Wing Screw 56 30552
26 30541 Anti-Kick Back Pawl A_.sernbly 57 5-1391
27 30542 X-Washer 58 5-1385
28 30543 Anti,Kick Back Pawl 59 30559
29 30544 Rod 60 S-1365
30 30545 Crow Pin 61 30693
31 30689 Bevel Latch Pin 62 30592
* ,_landard hardware item _ may be purchased locally, 63 5-,1372
5
Description
Latch Pin Handle Retainer
Latch Pin Spring
Disk
Retaining Ring #2
Hex "L'" Wrench 1/8 ocro"_ flats
_Soc Cup Point Set Screw 1/4-20 x 1
Bumper #2
Yoke Clamp Assembly
- Dust Cover
Bumper
Corrlage
Latch Pin Housing
*Hex Hd Moch :Screw 1/4-20x7/t6
_Med Lock Washer 1/4 SA.E
Motor Support Bearing
Yoke
Lock Screw
Yoke Clamp Handle Assembly
Index Handle _rake Shoe
Expander
Bevel Index Handle
Index Handle Washer
Pressure Pad
Bevel Lock Knob Assembly
Hex "L" Wrench 7/32 acro. fiats
*Pan Hd Math Screw 6-32x3/16
_Fiber Washer .140 X .250 x 1/32
Indicator #2
*Sac Hd Cap Screw 5/16.18 x 1-1/2
Latch Pin Handle
Bevel Scale
_#2x 1/8 Type U Drive Screw
Loading...