instructions for:
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
fRONT CONTROL ARM BUSH REMOVAL/
INSTALLATION TOOL - fORD TRANSIT
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
Wear eye
Protection
Wear Protective
Gloves
model no: VS4788
1. SAfETY
WARNING! ensure Health and safety, local authority and general workshop practice regulations are adhered to when using tools.
8 DO NOT use tools if damaged.
9 maintain tools in good and clean condition for best and safest performance.
9 Wear approved eye protection. A full range of personal safety equipment is available from your sealey dealer.
9 Wear protective gloves. A full range of personal safety equipment is available from your sealey dealer.
9 important: refer to vehicle manufacturer’s service instructions or a proprietary manual to establish the current procedure and data.
2. i INTRODUCTION
suitable for removal / installation of the front lower control arm suspension bush on a ford transit (00 - 2014).
the tool is designed to be used in conjunction with a press.
3. i SpECIfICATION
model number .......................................................... Vs4788
Applications ......................... ford transit (00 - 14) mk5, mk6
Bush oem number ...................4042024, 4372132, 4540787
4. OpERATION
4.1. ensure vertical alignment of the tool parts, the axis of the bush to be removed / tted and the axis of the press to be used prior to
attempting removal / tting. Failure to do so may prevent correct operation.
4.2. Arrange the receiving cup so that the slotted area is facing towards the user. (see fig 1).
fig. 1
ENVIRONMENT pROTECTION
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business park, Bury St Edmunds, Suffolk. Ip32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
© Jack sealey limited
Original Language Version
Vs4788 issue 1 10/11/17
Loading...