INSTRUCTIONS FOR:
MERCEDES EnginE & TRAnSMiSSiOn DiPSTiCKS (3 PC)
MODEL No: VS2000D.V2
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when accessing the dipstick.
Maintain dipstick in good and clean condition for best and safest performance.
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
Where appropriate, ensure that the vehicle's bonnet is correctly supported by the 'stay' provided before accessing the dipstick.
Renew the dipstick if bent or damaged in any way.
DO NOT touch hot parts of the vehicles engine or transmission when accessing the dipstick.
DO NOT touch live parts within the engine bay when accessing the dipstick.
DO NOT smoke or have live flames near the vehicle.
Vehicle should be in a well ventilated area.
WARNING! Under or over filling the engine or gearbox oil can cause permanent damage to the vehicle. Always refer to the manufacturer's
service Instructions, or a proprietary manual, to establish the current procedure and data.
2. SPECIFICATION & USE
Mercedes Transmission
Dipstick VS920TD (920mm).
(Codes: 716.5, 722.7, 722.8)
When filling for the first time add
5.5 litres, and after oil change
add 4.0 litres before starting the
engine. Start engine and wait 2
minutes before checking the
level. Selector must be in P or N.
Reading when cold - between
marks 2 & 4 (30ºC). Final
reading when warm - between
marks 8 & 12 (70-80ºC). Perform
cold and hot checks with engine
running.
Model Codes:168.031/032/033/
131/132/133,168.006/007/008/
009/109, 168.035/135, 414.700
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Mercedes Engine Dipstick
VS930ED (930mm).
For checking the oil level,
compatible with a large selection
of 1988 to 2005 engines in the
Mercedes range. The dipstick
is a service tool, therefore must
be removed after the fluid has
been checked. Length 930mm.
Engine Codes:103, 104, 111,
112,113, 119,120, 137, 271,
272, 604, 605, 606, 611,612,
613, 628, 642, 646, 647, 648.
Refer to up to date technical
data to obtain the correct
measurement required for the
specific engine and model that is
being worked on.
Mercedes Transmission
Dipstick VS1200TD (1200mm).
(Code: 722.6).
When filling for the first time or
after oil change add 5 litres. Start
engine and idle in P, shift
through the gears with brakes
applied several times then
back to P, waiting 2 minutes
before checking the level.
Reading when cold - between
max and min (25ºC range).
Precise checking is done at
80ºC. Once to temperature the
oil level must be between the
max and min (80ºC range).
Perform cold and hot checks
with engine running.
Model Codes: 463.322/323, 129,
140, 461.302/331/332/342/345
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VS2000D.V2 Issue: 1 - 28/02/12
Loading...