INSTRUCTIONS FOR: (1996-2006)
MERCEDES TRANSMISSION DIPSTICK
MODEL No: VS1200TD.V4
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure Health and Safety, local authority and general workshop practice
regulations are adhered to when accessing the dipstick.
Maintain dipstick in good and clean condition for best and safest performance.
Wear approved eye protection. A full range of personal safety equipment is available from your
Sealey dealer.
Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
Renew the dipstick if bent or damaged in any way.
DO NOT touch hot parts of the vehicles engine or transmission when accessing the dipstick.
DO NOT touch live parts within the engine bay when accessing the dipstick.
DO NOT smoke or have live flames near the vehicle.
Vehicle should be in a well ventilated area.
WARNING! Under or over filling the engine or gearbox oil can cause permanent damage to
the vehicle. Always refer to the manufacturer's service Instructions, or a proprietary manual,
to establish the current procedure and data.
2. SPECIFICATION & USE
Mercedes Transmission Dipstick 1200mm.
(Engine Codes: 722.6).
When filling for the first time or after oil change
add 5 litres. Start engine and idle in P, shift
through the gears with brakes applied several
times then back to P, waiting 2 minutes before
checking the level. Reading when cold -
between max and min (25ºC range). Precise
checking is done at 80ºC. Once to
temperature the oil level must be between the
max and min (80ºC range). Perform cold and
hot checks with engine running.
Model Codes: 461.302/331/332/342/345, 129,
140, 463.322/323
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Environmental Protection.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
VS1200TD.V4 Issue: 1 - 11/06/13
Loading...