brake piston wind-back tool kit - 50pc
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
model no: Vs0287.V2
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
Refer to
instruction
manual
Wear protective
gloves
Wear eye
protection
1. saFetY
warninG! ensure all Health and Safety, local authority, and general workshop practice regulations are strictly adhered to when using
tools.
8 do not use tools if damaged or worn.
9 maintain the tools in good and clean condition for best and safest performance.
9 ensure all threads are clean and well lubricated.
9 ensure that a vehicle which is jacked up is adequately supported with axle stands, ramps, etc. as appropriate.
9 Wear suitable clothing to avoid snagging. do not wear jewellery. Tie back long hair.
9 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey dealer.
9 Account for all tools and parts being used and do not leave them in or on the vehicle.
9 Store all parts in the case provided when not in use, store case in a safe, dry and child-proof location.
warninG! The warnings, cautions and instructions discussed in this document cannot cover all possible conditions and situations that
occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by
the operator.
iMportant: Always refer to the vehicle manufacturer’s service
instructions, or proprietary manual, to establish the correct
procedure and data. These instructions for use are provided
as a guide only.
2. introduction
Comprehensive master set of adaptors to suit a wide range of
vehicle applications. Suitable for push-back and wind-back
brake pistons. Includes left and right-handed thrust bolt
assemblies, caliper removal tools and grease container.
Precision made adaptor plates with thrust bolt assembly
and reaction plate.
enVironMent protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey limited
Original Language Version
VS0287.V2 Issue 1 22/05/18
Loading...