Sealey SPI3S.V2,SPI10S Instructions For Use Manual

INSTRUCTIONS FOR
INTELLIGENT SPEED CHARGER
BATTERY CHARGER 3AMP,12V

MODEL NO: SPI3S.V2

© Jack Sealey Limited

Original Language Version

SPI3S.V2 | Issue 4 (18) 17/05/19

ENGLISH Original instructions

Model: SPI3S

Automatic Battery Charger

OWNER’S MANUAL

Markings and symbols

Read manual

before using.

Contact the equipment

supplier for details on

how to properly dispose

of this product within

a specic country, per

WEEE requirements.

WARNING

READ THE ENTIRE MANUAL BEFORE USING THIS PRODUCT.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.

Warning

Caution,

risk of electric

shock.

Use in a

well-ventilated

area.

Do not

expose

to rain.

For indoor

use only.

Keep away from

sparks and ame –

battery could emit

explosive gases.

Class II

Charger

IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.

SAVE THESE INSTRUCTIONS – This manual will show you how to use your charger safely

and effectively. Please read, understand and follow these instructions and precautions
carefully, as this manual contains important safety and operating instructions. The safety
messages used throughout this manual contain a signal word, a message and an icon.

The signal word indicates the level of the hazard in a situation.

DANGER

WARNING

CAUTION

IMPORTANT

Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in
moderate or minor injury to the operator or bystanders.

Indicates a potentially hazardous situation which, if not avoided, could result in
damage to the equipment or vehicle or property damage.

• 2 •

1. IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS.

This manual contains important safety and operating instructions.

WARNING

WARNING

RISK OF ELECTRIC SHOCK OR FIRE.

1.1 Read the entire manual before using this product. Failure to do

so could result in serious injury or death.

1.2 Children should be supervised to ensure that they do not
play with the appliance. This appliance can be used by children

aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.

1.3 This charger is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the charger by a person responsible
for their safety. Children should be supervised to ensure they do not play with the charger.

1.4 Do not expose the charger to rain or snow.

1.5 Use only recommended attachments. Use of an attachment not recommended or sold by

Sealey may result in a risk of re, electric shock or injury to persons or damage to property.

1.6 To reduce the risk of damage to the electric plug or cord, pull by the plug rather than the
cord when disconnecting the charger.

1.7 An extension cord should not be used unless absolutely necessary. Use of an improper

extension cord could result in a risk of re and electric shock. If an extension cord must be

used, make sure:

• That the pins on the plug of the extension cord are the same number, size and shape as

those of the plug on the charger.

• That the extension cord is properly wired and in good electrical condition.

• That the wire size is large enough for the AC ampere rating of the charger as specied in

section 8.

1.8 To reduce the risk of electric shock, unplug the charger from the outlet before attempting
any maintenance or cleaning. Simply turning off the controls will not reduce this risk.

1.9 Do not operate the charger with a damaged cord or plug. If the supply cord is damaged, it

must be replaced by the manufacturer, its service agent or similarly qualied persons in order

to avoid a hazard.

1.10 Do not operate the charger if it has received a sharp blow, been dropped or otherwise

damaged in any way; take it to a qualied service person.

1.11 Do not disassemble the charger; take it to a qualied service person when service or repair
is required. Incorrect reassembly may result in a risk of re or electric shock.

RISK OF EXPLOSIVE GASES.

WARNING

1.12 WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS.

BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY
OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT YOU
FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE CHARGER.

1.13 To reduce the risk of a battery explosion, follow these instructions and those

published by the battery manufacturer and the manufacturer of any equipment you
intend to use in the vicinity of the battery. Review the cautionary markings on these products
and on the engine.

1.14 This charger employs parts, such as switches and circuit breakers, that tend to produce
arcs and sparks. If used in a garage, locate this charger 18 inches (46 cm) or more above

oor level.

WARNING

IMPORTANT

Do not use with non-rechargeable batteries.
Use only with lead-acid or lithium ion LiFePO4 rechargeable batteries.

Do not start the vehicle with the charger connected to the AC outlet, or it
may damage the charger and your vehicle.

• 3 •

2. PERSONAL PRECAUTIONS

WARNING

RISK OF EXPLOSIVE GASES.

2.1 NEVER smoke or allow a spark or ame in the vicinity of a battery or engine.

2.2 Remove personal metal items such as rings, bracelets, necklaces and

watches when working with a lead-acid or lithium ion battery. These batteries can
produce a short-circuit current high enough to weld a ring or the like to metal,

causing a severe burn.

2.3 Be extra cautious, to reduce the risk of dropping a metal tool onto the battery. It might
spark or short-circuit the battery or other electrical part that may cause an explosion.

2.4 Use this charger for charging only 12V automotive/power sport batteries, including 6-celled
lead-acid and 4-celled lithium LiFePO4 batteries, with rated capacities of 3-50Ah (12V)*. It is
not intended to supply power to a low voltage electrical system other than in a starter-motor
application. Do not use this battery charger for charging dry-cell batteries that are commonly
used with home appliances or lithium ion batteries used in cell phones, laptops, power tools, etc.
These batteries may burst and cause injury to persons and damage to property.

*The SPI3S has been tested and approved to charge the ChaoBaLi LiFePO4 battery,

model number TDS-1220AH-1. Before charging any other LiFePO4 battery, we
recommend contacting the battery supplier.

2.5 NEVER charge a frozen battery.

2.6 Consider having someone nearby to come to your aid when you work near a lead-acid battery.

2.7 Have plenty of fresh water and soap nearby, in case battery acid contacts your skin,

clothing or eyes.

2.8 Wear complete eye and body protection, including safety goggles and protective clothing.
Avoid touching your eyes while working near the battery.

2.9 If battery acid contacts your skin or clothing, immediately wash the area with soap and

water. If acid enters your eye, immediately ood the eye with cold running water for at least

10 minutes and get medical attention right away.

2.10 If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT
induce vomiting. Seek medical attention immediately.

3. PREPARING TO CHARGE

WARNING

WARNING

RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS A
HIGHLY CORROSIVE SULFURIC ACID.

3.1 If it is necessary to remove the battery from the vehicle to

charge it, always remove the grounded terminal rst. Make sure all

of the accessories in the vehicle are off, to prevent arcing.

3.2 Be sure the area around the battery is well ventilated while the battery is being charged.

3.3 Clean the battery terminals before charging the battery. During cleaning, keep airborne

corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and
water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch
your eyes, nose or mouth.

3.4 Add distilled water to each cell until the battery acid reaches the level specied by the
battery manufacturer. Do not overll. For a battery without removable cell caps, such as

valve regulated lead acid batteries (VRLA), carefully follow the manufacturer’s recharging
instructions.

3.5 Read, understand and follow all instructions for the charger, battery, vehicle and any
equipment used near the battery and charger. Study all of the battery manufacturer’s

specic precautions while charging and recommended rates of charge.

3.6 Determine the voltage of the battery by referring to the vehicle owner’s manual and make
sure that the output voltage selector switch is set to the correct voltage. If the charger has

an adjustable charge rate, charge the battery in the lowest rate rst.

3.7 Make sure that the charger cable clips make tight connections.

• 4 •