Sealey SC05 Instructions Manual

INSTRUCTIONS FOR:
UTILITY STORAGE CUPBOARD WITH fOUR SHELVES
MODEL No: SC05
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.
1. SAfETY INSTRUCTIONS
1. SAfETY INSTRUCTIONS
1.1. GENERAL SAfETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cupboard.
Locate cupboard in a suitable work area.  Keep the work area clean, uncluttered and ensure there is
adequate lighting. WARNING! Use cupboard on level and solid ground, preferably concrete. Keep the cupboard clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.  DO NOT use the cupboard for any purpose other than that for
which it is designed.
DO NOT use the cupboard outdoors. DO NOT place the cupboard in a damp or wet location or an area
where there is condensation. DO NOT clean the cupboard with any solvents which may damage the surfaces or the protective coating.
 DO NOT move the cupboard when there are items placed inside.  DO NOT step on the shelves.  DO NOToverload the unit - maximum total load capacity is 70kg,
20kg per shelf and 10kg on the base.
2. INTRODUCTION
Supplied at packed, unit is easy to assemble. Three height adjustable
shelves give a total load capacity of 70kg. Ideal for home, ofce, garage
or workshop use.
Dimensions: Width: 682mm, Depth: 376mm, Height: 1713mm.
3. ASSEMBLY
3.1. Unpack the box and check the contents against the parts diagram above. If there are any parts missing, contact your local Sealey dealer.
© Jack Sealey Limited
Original Language Version
SC05 Issue: 2 (SP) - 06/02/14
3.2 . Assemble as per the following diagrams, referencing the parts diagram overleaf.
© Jack Sealey Limited
Original Language Version
SC05 Issue: 2 (SP) - 06/02/14
Loading...
+ 1 hidden pages