INSTRUCTIONS FOR:
ROLLCABS
1. SAFETY
To avoid tipping, DO NOT open more than one
drawer at a time.
DO NOT climb on the drawers or cabinet.
Close and secure all drawers when moving.
2. ASSEMBLY
1. Attach the castors to the bottom of the trolley using 4
bolts per castor.
NOTE: Swivel castors should be mounted at the same
side as the handle (left hand side)
2. Insert the side mounted handle into the cabinet and
attach with 4 bolts and washers.
NOTE: The side handle should be mounted on the
same side as the swivel castors (left hand side)
3. To remove a drawer with roller sliders, pull the
drawer completely out, press down the left tab and
lift up the right tab, pull drawer off the slides.
To reinstall the drawer, realign with the internal
drawer slide and push until it locks in place.
3. MAINTENANCE
Lubricate castors periodically and tighten all nuts and
bolts.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
Rollcabs Issue: 3 - 04/07/16
Loading...