Sealey re55.v6 Instruction Booklet

instructions for

MPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

bumper rack double-sided 4-level

model no: re55.v6

Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.

refer to
instructions

1. safeTy

9 familiarise yourself with the application, limitations and hazards of the rack.
9 maintain the rack in good condition (use authorised replacement parts).
9 Keep the rack clean for best and safest performance.
9 locate the rack in a suitable work area.

 WarNiNG! use the rack on level and solid ground, preferably concrete.
8 do NoT overload the rack.
8 do NoT climb on the rack.
8 do NoT use the rack for any purpose other than for which it is designed.
8 do NoT use the rack if any parts are damaged or missing as this may cause failure and/or personal injury.

9 Keep the work area clean, uncluttered and ensure that there is adequate lighting.
9 Keep children and unauthorised persons away from the work area.

 WarNiNG! the warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may

occur. it must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the
operator.

2. iNTroducTioN

double sided rack for safe and tidy workshop storage of most vehicle bumpers. Heavy duty construction ideal for use in body shops. four pairs

of height adjustable support arms for maximum capacity and exibility. Fitted with four castors, two with brake, for maximum manoeuvrability

and safe positioning.

3. specificaTioN

model no .......................................................................re55

Width ........................................................................1170mm

Height ......................................................................2180mm

Arm length ................................................................520mm

4. assembly

4.1. check quantities of parts.
item description Qty.
1 Horizontal top bar 1Pc
2 Vertical support bar 2Pcs
3 Horizontal bottom bar 1Pc
4 Base bar 2Pcs
5 Bumper support bar 8Pcs
6 casters 4Pcs
7 Knob 8Pcs
8 Bolt, Washers, nut 2sets
9 Bolt, Washers, nut 8sets
10 Bolt, Washers, nut 16sets

4.2. using bolt set (10) attach casters (6) to Base bars (4).

4.3. using bolt set (9) attach Horizontal bottom bar (3) to Base

bars (4).

© Jack sealey limited

Original Language Version

re55.V6 | issue 1 10/08/16

4.4. slide Bumper support bars (5) on to Vertical support bars (2), clamp in position using Knob (7).

4.5. side Vertical support bars (2) on to Base bars (4) see diagram. fix/bolt together using bolt set (9). ensure the clamping knobs (7)

are positioned as shown.

4.6. using bolt set (8) attach Horizontal top bar (1) taking necessary precautions as this is above head height.

parts support is available for this product. To obtain a parts listing and/or diagram,

please log on to www.sealey.co.uk, email [e-mail] or telephone [phone].

environmental protection

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.

imporTaNT: no liability is accepted for incorrect use of this product.
WarraNTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

© Jack sealey limited

sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar

Original Language Version

01284 757500
01284 703534

www.sealey.co.uk
[e-mail]

re55.V6 | issue 1 10/08/16