Page 1
INSTRUCTIONS FOR:
MOTORCYCLE HELMET & GEAR TIDY
MODEL NO: MS081
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Instruction
Manual
1. SAFETY
DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
DO NOT overload this tidy; it should only be used for the designed purpose.
DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
Ensure that the tidy is firmly fixed to the wall using suitable wall fixings.
Ensure that, when installed, it can be accessed without over-reaching or over-balancing.
2. INTRODUCTION
Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organise the storage of gloves, clothing and
helmet.
3. INSTALLATION
3.1. Choose a suitable location and, ensuring that the tidy is level, mark the position for the four holes on the wall.
3.2. Select suitable wall fixings and drill the wall on the marks made previously..
3.3. Use the selected wall fixings to secure the tidy to the wall.
3.4. Hang the supplementary shelves from the main shelf if required.
4. CARE
4.1. Clean with a soft, damp cloth. DO NOT use abrasive or solvent cleaners.
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, dispose of it according to local regulations.
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Environmental Protection
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
MS081 Issue: 1 -16/02/17
Loading...