instructions for
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
dual carburettor access0ry kit for
ms029
model no: ms029dck
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
refer to
instructions
Wear eye
protection
Wear protective
gloves
1. safety
WArninG: do not smoke or use A nAked flAme While usinG this item. Be AWAre thAt petrol vApour is
heAvier thAn Air And forms An explosive mixture.
8 do Not use the hoses for any other purpose than that for which is designed.
9 ensure that the working area is well ventilated.
9 check that the hose clips are tight before use.
9 check the condition of the hose before use
9 check the hoses for leaks before use.
9 Any fuel spillage should be cleaned up immediately to avoid the risk of accidental ignition.
9 if fuel leakage is noticed at any time: abort the engine test, close the delivery valve (ms029) and remove the tank to an open area.
9 After use, drain the system of petrol into an approved container. Allow any fuel residue in the portable fuel tank (ms029) / hoses to
evaporate.
9 When dry and clear of vapour: store in a cool, dry, childproof location.
2. iNtroductioN
dual entry carburettor accessory kit for Model No. MS029. Enables MS029 to be tted to a motorcycle with dual fuel inlets eliminating need to
balance fuel tank in an awkward position. includes 100mm hose, two 200mm hoses, four hose clamps and Y-piece adaptor.
3. specificatioN
model no ............................................................. ms029dck
contents..200mm hose (x2), 100mm hose, hose clamps (x4)
4. operatioN
ms029 ms029dck
Assemble as stated in diagrams above ensuring that hose clips are tight to prevent fuel leakage.
© Jack sealey limited
Original Language Version
ms029dck | issue 1 30/11/16
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
importaNt: no liability is accepted for incorrect use of this product.
WarraNty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
sole uk distributor, sealey Group.
kempson Way, suffolk Business park,
Bury st. edmunds, suffolk.
ip32 7Ar
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
© Jack sealey limited
Original Language Version
ms029dck | issue 1 30/11/16
Loading...