InstructIons For:
ALUMINIUM LOADING RAMPS 680KG
CAPACITY PER PAIR
model no: LR680.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREfULL Y. NOTE THE SAfE OPERA TIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE fOR THE PURPOSE fOR WHICH IT IS INTENDED. fAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAfE fOR fUTURE USE.
read instructions
1. SAfETY
WARNING! danger of serious personal injury exists when using a loading ramp. If driving up an incline ramp, training is
recommended. For example, when driving up an incline with rear wheel drive, reverse up the ramp. Always have the drive wheels
leading to avoid tipping.
regularly check the ramp for worn, loose, or damaged parts. Failure to do so may cause severe injury. ! DO NOT use if you find any of
these conditions. contact your sealey dealer for repairs.
▲ the surface of the aluminium ramp may become slippery in icy or wet conditions. caution should be used when using the ramp.
Keep the aluminium ramp surface free of dirt and debris.
Always check the vehicle manufacturer’s recommended degree of incline. DO NOT use ramps at a steeper angle than recommended.
DO NOT add to or modify any part of the aluminium ramp; doing so will void your warranty.
DO NOT use the aluminium ramp for purposes other than those it was designed for.
use caution when folding and unfolding your aluminium ramp. Beware of pinch points.
Be sure that the ramp is always on a solid landing and firmly placed. Always anchor your aluminium ramp in place.
clean aluminium ramps with water and mild detergent.
WARNING! The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
WARNING! DO NOT EXCEED MAXIMUM CAPACITY Of 680kg. (factor in weight of driver when applicable)
2. INTRODUCTION
manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles. suitable for
loading/unloading quad bikes, ride-on lawnmowers or any other four wheeled vehicle up to a maximum of 680kg. Features extended claws at
one end to help secure ramp when in use. Folding design for compact storage when not in use.
3. SPECIfICATION
Folded dimensions (l x W x H):......................... 1160 x 290 x 150mm
extended dimensions (l x W x H):..................... 2324 x 290 x 110mm
maximum capacity:............................................ 680kg
Weight:............................................................... 14.5kg
"H"
Incline
Quick reference
"H" Incline angle
1300 35°
1150 30°
975 25°
800 20°
600 15°
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Environmental Protection
Original Language Version
angle
01284 757500
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
lr680.V2 Issue: 1 - 11/06/15
Loading...