Sealey led3604 Instruction Booklet

instructions for

MPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

rechargeable 360° slim inspection lamp
16smd led + 1w led lithium-ion

model no: led3604 series

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.

refer to
instructions

1. safety

9 inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. if worn or

damaged do not use.

9 ensure the torch is fully charged before initial use.
8 do not charge in damp conditions.
8 do not turn the torch on when it is being charged.
8 do not shine directly into your, another person’s or an animal’s eyes.
8 do not allow children to use the torch.
8 do not handle or move the torch whilst it is being charged.
8 do not use the torch if you suspect that the battery or the torch casing is damaged.
8 do not leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently

recharge the battery at least once every six months of non-use.
8 do not attempt to open, disassemble, modify or service the battery pack.
8 do not crush, puncture, short external contacts or dispose of in re or water.

9 replace only with the battery pack designated for this product.
9 recycle or dispose of used battery as stipulated by local regulation.
9 if the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. if it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

2. introduction

unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. exclusive patented design
owned by and registered to sealey. each lamp houses 16 super bright smd leds providing up to 600 lumens through the adjustable rotary
switch and a 1W smd led directional torch. features a single hanging hook, a magnetic base allowing hands free operation and battery level
indicator. High quality 2.6Ah 3.7V lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional ni-mH
batteries. supplied with a high quality braided usB lead.

3. specification

model no ......................................................led3604 series

Battery ........................................................3.7V 2.6Ah li-ion

led Quantity ................................................16 smd + 1led

lumen output side (high/low)/top .................(600/50)/120lm

operating time side (high/low)top ......................(1.5/16)/10hr

iP rating .........................................................................iP54

iK rating .........................................................................iK07

minimum length .........................................................390mm

maximum length ........................................................400mm

important warranty information

The battery tted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.

We will provide warranty against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.

If the battery is not properly charged before rst use, or regularly conditioned, its capacity will diminish.

under these circumstances we will not replace the battery regardless of whether the battery less than one year old.

4. operation

4.1. CHARGING (g.2)

4.1.1. remove usB socket cover from the side of the lamp.

4.1.2. connect the usB lead to the port on the side of the lamp and a usB power socket. turn on the power supply.

4.1.3. The battery charge level LED on the side of the lamp will ash green and show the level of charge.

4.1.4. When the battery has fully charged all the led’s will turn Green.

4.1.5. switch off power supply, remove charging lead and replace socket cover.

© Jack sealey limited

Original Language Version

led3604 series | issue 1 23/05/17

4.2. operation

4.2.1. The lamp has a magnetic base to x to ferrous materials and a hook to hang the lamp.

4.2.2. By pulling the base from the main body the 360°, tilt function can be used enabling the lamp to be positioned in any direction.

4.2.3. to turn on the lamp rotate the red switch clockwise on the back of the lamp. further rotation will increase the brightness of the lamp.
rotate anti-clockwise to switch off.

4.2.4. to turn on the torch press the red button on the back of the unit, press again to turn off.

g.1

environmental protection

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.

weee regulations

dispose of this product at the end of its working life in compliance with the eu directive on
Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.

battery removal

the battery pack can not be disassembled and should be disposed of in an environmentally protective way.
under the Waste Batteries and Accumulators regulations 2009, Jack sealey ltd are required to inform potential

purchasers of products containing batteries (as dened within these regulations), that they are registered wih Valpak’s

registered compliance scheme. Jack sealey ltd’s Batteries Producer registration number (BPrn) is BPrn00705.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.

important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar

01284 757500
01284 703534

www.sealey.co.uk
[e-mail]

© Jack sealey limited

Original Language Version

led3604 series | issue 1 23/05/17