Sealey cX313 Instruction Booklet

instructions for

MPORTANT:

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

workshop trolley 3-level composite
with parts storage

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.

refer to
instructions

1. safety

 warNiNg! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this trolley.

9 Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.

8 Do Not overload the trolley - see specifications.

9 use the trolley in a suitable work area.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.

9 Keep the trolley clean and tidy in accordance with good workshop practice.
8 Do Not use the trolley for any purpose other than that for which it is designed.
8 Do Not stand on the trolley, use it as a ladder or allow others to ride on the trolley.

9 use the wheel locks to prevent the trolley from inadvertently moving.
8 Do Not leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
8 Do Not use trolley on uneven ground and do not run over curbs or steps - use a ramp.
8 Do Not use trolley if any part is significantly damaged, paying particular attention to the wheels.

9 Keep children and unauthorised persons away from the work area.

model no: cX313

2. iNtroDuctioN

composite garage workshop trolley featuring aluminium corner posts with a 30kg capacity per shelf. each shelf features three compartments
with removable dividers, seven tool holder slots, four additional compartments for small fixings and two cup/can holders. these features allow for
all of your tools and equipment to be on hand and easily accessed. Quick and easy to assemble, with four swivel castors, two featuring brakes.

3. specificatioNs

model no: ....................................................................cX313

overall size (W x d x H): .........................570 x 455 x 895mm

shelf size (W x d x H): ..............................495 x 280 x 70mm

capacity per level: .........................................................30kg

total load capacity: ........................................................90kg

© Jack sealey limited

Original Language Version

cX313 | issue:1 - 27/06/17

4. coNteNts

5. assembly.

fig.1

fig.3 fig.4

fig.2

Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to

www.sealey.co.uk, email [e-mail] or telephone [phone]

eNviroNmeNt protectioN

recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.

Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.

important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

sealey group, kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar

01284 757500 01284 703534 [e-mail] www.sealey.co.uk

© Jack sealey limited

Original Language Version

cX313 | issue:1 - 27/06/17