Sealey cst999 Instruction Booklet

sack truck
I
MPORTANT:
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
model no: cst999
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
Refer to
instructions
1. safety
9 Always load evenly with the centre of gravity
of the load as near the centre and rear of the plate as possible.
9 obtain additional support for large or wide loads
to prevent tipping.
8 DO NOt overload the truck - see Specification. 8 DO NOt leave unattended, especially when
loaded, unless the wheels are chocked or the truck is otherwise secured.
8 DO NOt use truck on curbs or steps - use a ramp. 8 DO NOt allow others to ride on the truck. 8 DO NOt use the truck if any part is damaged,
paying particular attention to the wheels.
2. specificatiON
extra strong tubular steel frame construction. Steel centred pneumatic wheels allow transport over the roughest terrain. High back and at loading capabilities with rubber hand-grips for added comfort.
Model No. ................cst999
max. load...................300kg
Wheel diameter ............ 250mm
Wheel Thickness ............ 90mm
Height ..................1300mm
overall Width ..............500mm
Platform depth ............. 280mm
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson Way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey limited
Original Language Version
CST999 | Issue 2 (HF) 04/10/18
Loading...