SACK TRUCK
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
MODEL NO: CST998
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Refer to
instructions
1. SAFETY
9 Always load evenly with the centre of gravity of the load as near the centre and rear
of the plate as possible.
9 Obtain additional support for large or wide loads to prevent tipping.
8 DO NOT overload the truck - see Specification.
8 DO NOT leave unattended, especially when loaded, unless the wheels are chocked
or the truck is otherwise secured.
8 DO NOT use truck on curbs or steps - use a ramp.
8 DO NOT allow others to ride on the truck.
8 DO NOT use the truck if any part is damaged, paying particular attention to the wheels.
2. INTRODUCTION
Extra strong tubular steel frame construction. Steel centred pneumatic wheels allow transport
over the roughest terrain. Features ‘P’ handle, highback and at loading capabilities.
3. SPECIFICATION
Model No. ................CST998
Max. Load...................300kg
Wheel Diameter
Wheel Thickness ............ 90mm
Height ..................1300mm
Overall Width ..............550mm
Platform Depth
Nett Weight................13.88kg
............250mm
.............230mm
4. ASSEMBLY
4.1 Wheels. Ensure axle is clean from dust and dirt
to allow free movement of the wheel.
4.2 Slide the wheel (Fig.1.2) onto the axle (Fig.1.1),
followed by the washer (Fig.1.3), complete by
pushing the split pin (Fig.1.4) through the hole
in the end of the axle and bending over to retain.
4.3 Repeat for the other side.
Parts support is available for this product. Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
g.1
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
CST998.V2 | Issue 2 (HF) 19/10/18
Loading...