INSTRUCTIONS FOR:
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
MODULAR CORNER FLOOR AND WALL
CABINETS 865mm
MODEL NO’S: APMS60, APMS61
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
Refer to
Instruction
Manual
Wear
Protective
Gloves
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
9 Locate in a suitable work area.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use storage on level and solid ground, preferably concrete.
9 Keep the storage system clean and tidy in accordance with good workshop practice.
9 Keep children and unauthorised persons away from the work area.
8 DO NOT use the storage system for any purpose other than that for which it is designed.
8 DO NOT use the storage system outdoors.
8 DO NOT place the storage system in a damp or wet location or an area where there is condensation.
8 DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
8 DO NOT move the storage system when there are items placed inside.
8 DO NOT step on the shelves.
8 DO NOT overload the storage system.
2. INTRODUCTION
Modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
Standard features include:
• Modular design to enable easy upgrading.
• Tough and durable construction with a hammered metal finish on the doors and drawers.
• Aluminium handles and drawer pulls.
• Ball bearing slides throughout.
• Choice of worktop - pressed wood or stainless steel.
• Gas struts on wall cabinet doors or simple tambour front.
• Floor cabinets feature adjustable shelves.
• All pieces are fully welded except Model No’s APMS55, APMS56 and APMS60 Floor Cabinets which require simple assembly.
• Each unit supplied with a lock and two keys (except wall cabinets).
3. SPECIFICATION
Model No:.................................APMS60...............................APMS61
Overall Size (W x D x H) ......................865 x 865 x 910mm .............865 x 865 x 350mm
© Jack Sealey Limited
Original Language Version
APMS60, APMS61 Issue: 1 - 18/10/16
4. CONTENTS
4. CONTENTS
APMS60
5. ASSEMBLY
© Jack Sealey Limited
Original Language Version
APMS60, APMS61 Issue: 1 - 18/10/16
Loading...