instructions for
I
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
modular floor cabinet full HeigHt 600mm
model no: aPmS55
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
refer to
instruction
manual
Wear
Protective
gloves
1. Safety
Warning! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
locate cabinet in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Warning! use cabinet on level and solid ground, preferably concrete.
Keep the cabinet clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
do not use the cabinet for any purpose other than that for which it is designed.
do not use the cabinet outdoors.
do not place the cabinet in a damp or wet location or an area where there is condensation.
do not clean the cabinet with any solvents which may damage the surfaces or the protective coating.
do not move the cabinet when there are items placed inside.
do not step on the shelves.
do notoverload the cabinet.
2. introduction
modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specic needs. Purchase a
simple base cabinet or create a full workshop storage system.
3. SPecification
model no: .................................................................APMS55
size (W x d x H):...................................600 x 458 x 2000mm
4. PartS liSt
© Jack sealey limited
Original Language Version
APMS55 | Issue 1 04/04/16
5. aSSembly
Step 1 Step 2
Step 3 Step 4
Step 5
© Jack sealey limited
Step 6
Original Language Version
APMS55 | Issue 1 04/04/16
Step 7
Step 8
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
environmental Protection
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
imPortant: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
APMS55 | Issue 1 04/04/16
Loading...