Sealey APMS01, APMS02, APMS03, APMS04 Instruction Booklet

INSTRUCTIONS FOR:
775/1550MM DOOR/DRAWER CABINET
MODEL Nos: APMS01, APMS02, APMS03, APMS04
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERA TIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these cabinets.
2. INTRODUCTION
Heavy-duty high end Modular Garage Storage System with an appearance to enhance any garage/workshop. Built to withstand the rigours of
any garage environment. Versatile and durable steel construction that will last for years. Easily adjusts to specic needs; purchase a simple
base cabinet or create a full garage storage system.
3. SPECIFICATION
Model No: ............... APMS01..................APMS02...................APMS03..................APMS04
Overall Size (WxDxH): ...... 775x610x955mm ...........1550x610x955mm ........... 775x610x955mm......... 1550x640x955mm
Small Drawer (WxDxH): ............................... . . . . . . . . . . . . . . . . . . . . . . . . . .(3) 670x535x55mm .........(6) 670x535x55mm
Large Drawer (WxDxH):............................... . . . . . . . . . . . . . . . . . . . . . . . . . .(2) 670x535x130mm ........(2) 670x535x130mm
X-Large Drawer (WxDxH): ............................. . . . . . . . . . . . . . . . . . . . . . . . . . .(1) 670x535x205mm ........(2) 670x535x205
Full Width Drawer (WxDxH): ........................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1) 445x535x125mm
4. ASSEMBLY
5.1. Fit Worktop
5.1.1. The only assembly required is to t the worktop supplied separately and the door handles ( if applicable).
5.1.1. Fit worktop by screwing from underneath using 4x hex ange bolts (see g.1) or 6x hex ange bolts for 60" wide models (see g.2).
5.2. Fit Handles
5.2.1. Handles screw on from the rear, using cross head screws (see g.2).
5.3. Remove Drawers (if applicable)
5.2.1. Pull drawer out fully and push black lever in each drawer runner up or down, then pull out drawer to release (see g.1).
© Jack Sealey Limited
Fig.2Fig.1
Original Language Version
APMS01, APMS02, APMS03, APMS04 Issue:2(L)- 11/10/16
Pictured with top tted, supplied
separately
Parts support is available for this product. To obtain a listing and/or diagram, please log on to: www.sealey.co.uk,
email: sales@sealey.co.uk or phone: 01284 757500.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environment.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk, IP32 7AR
Original Language Version
01284 757500 01284 703534
APMS01, APMS02, APMS03, APMS04 Issue:2(L)- 11/10/16
www.sealey.co.uk
sales@sealey.co.uk
Loading...