instructions for
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
industrial workstation 4 drawers
model no: aP990
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
refer to
instructions
Wear protective
gloves
Wear safety
footwear
1. safety
1.1. General safety
warninG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using workbenches
and associated workbench drawers.
warninG! use the workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into
the surface.
9 locate the workstation in a suitable working area.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
9 Keep the workstation clean and tidy in accordance with good workshop practice.
9 Keep children and unauthorised persons away from the working area.
9 take care when assembling of sharp edges
8 do not remove a fully loaded drawer.
8 do not use the workstation drawer for any purpose other than that for which it is designed.
8 do not use the workstation out of doors.
8 do not get the workstation drawers wet or use in damp or wet locations or areas where there is condensation.
8 do not clean the workstation drawers with any solvents which may damage the painted surfaces.
note: the assembly of this product to the will require assistance.
2. introduction
industrial four drawer workstation, ideal for site workers or line managers and supervisors. lockable ball bearing slide drawers allow for
paperwork, books, stationary, valuables or even tools to be stored safely and securely. Large at work surface provides plenty of room to
carry out day to day tasks. four large and four small pigeon holes can be used for paperwork, stationary or as in and out trays, keeping the
essentials on hand and in order. lower shelf allows for items such as workwear to be stored and on hand. supplied with two keys. some
assembly required.
3. sPecification
model no. ....................................................................AP990
overall size (W x d x H) .......................990 x 735 x 1430mm
large drawer (x1) ...................................485 x 500 x 140mm
large drawer (x1) ...................................330 x 500 x 140mm
X-large drawer (x2) ................................330 x 500 x 310mm
Pigeon Hole small(x3) ................................70 x 220 x 90mm
Pigeon Hole large(x3) ..............................300 x 220 x 90mm
shelf (W x d) .....................................................585 x 380mm
4. asseMbly
© Jack sealey limited
Original Language Version
g.1
AP990 | issue 2 23/03/17
PArts list descriPtion Qty.
A drawer cabinet (with
3 drawers)
B desk top (with
one drawer)
c Panel leg support 1
d desk Hood 1
e lower self 1
f drawer lock 4
g Handles 4
H Hanging folder
✳
4.1. take all the components out of the carton and compare to the
parts list.
4.2. Pull out the drawers until the plastic latches are exposed.
4.3. Press the plastic latches of both sides at the same time g.2,
pull out the drawer.
4.4. Place part A, part B3 (Keep the folded edge inward) and part c
as shown in g.3. Then x with bolts provided.
drawers 2
drawer 1
Pedestal 1
B1 desk top Plate 1
B2 drawer 1
B3 support 2
4
brackets
nuts/Bolts 22
g.2
4.5. Place part E, part B1 and part D as shown in g.4. Align bolt holes and x with bolts provided.
g.3
g.4
© Jack sealey limited
Original Language Version
AP990 | issue 2 23/03/17
Loading...