
INSTRUCTIONS FOR
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
CORNER RACKING UNIT 5 LEVEL 150KG
CAPACITY PER LEVEL
MODEL NO: AP7150C
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
Refer to
instructions
Wear
Wear
protective
protective
gloves
gloves
Wear eye
protection
1. SAFETY
1.1. GENERAL
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this racking
unit.
9 Locate racking unit in a suitable work area.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use racking unit on level and solid ground, preferably concrete.
9 Keep the racking unit clean and tidy in accordance with good workshop practice.
9 Keep children and unauthorised persons away from the work area.
8 DO NOT use the racking unit for any purpose other than that for which it is designed.
8 DO NOT use the racking unit outdoors.
8 DO NOT place the racking unit in a damp or wet location or an area where there is condensation.
8 DO NOT clean the racking unit with any solvents which may damage the surfaces or the protective coating.
8 DO NOT move the racking unit when there are items placed on it.
8 DO NOT overload the racking unit.
2. i INTRODUCTION
Fully painted steel frame with ve shelves. Space saving corner unit with 150kg capacity per level giving a maximum capacity of 750kg per rack.
Two piece uprights allow use as a single bay rack or split into two separate shelf systems or workstations. Ideal for use in conjunction with Model
No. AP7200 racking unit.
3. SPECIFICATION
Model no: ................................................................AP7150C
Size (W x D x H):...................................730 x 730 x 1830mm
© Jack Sealey Limited
Original Language Version
AP7150C | Issue:2 (I) 18/04/17

4. ASSEMBLY
4.1. Assemble the racking unit following the sequence below, referencing the parts list. No tools are required although a mallet is
useful for tapping the brackets together.
© Jack Sealey Limited
Original Language Version
AP7150C | Issue:2 (I) 18/04/17

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
Environmental Protection
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
© Jack Sealey Limited
Original Language Version
AP7150C | Issue:2 (I) 18/04/17