instructions for
MPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Add-on mid-box 2 drAwer retro blAck with red Anodised drAwer pulls
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
model no: Ap28102br
refer to
instruction
manual
Wear
Protective
gloves
1. sAfety
R wArninG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this product.
R wArninG! use caution when handling and assembling the metal components. the metal may have sharp edges or corners, the use of
protective gloves is recommended.
do not open more than one drawer at a time.
do not step on the drawers.
do not let children play with the roll cab or top chest.
ensure all drawers are fully closed and the self locking catch is activated, before moving the toolbox.
secure the brakes when rollcab is in the desired position.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the mounting frame clean and tidy in accordance with good workshop practice.
do not use in damp work areas.
R wArninG! the warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and
situations that may occur. it must be understood that common sense and caution are factors which cannot be built into this product, but
must be applied by the operator.
2. introduction
retro styled tool chests with modern day functionality. features drawers with ball bearing slides and red anodised ‘lift & latch’ drawer pulls
preventing inadvertent opening. Heavy duty chrome plated side handles on chest and stainless handle on rollcab for easy manoeuvrability.
topchest is further enhanced with chrome plated supports on the clam shell lid for easy opening, providing additional storage. rollcab features
stylish heavy duty castors, two with brakes. All drawers are tted with liners and lock on one key turn.
3. specificAtion
model no: ..........................................................Ap28102br
dimensions (W x d x H): .........................712 x 457 x 270mm
medium drawer (x2): .................................570 x 400 x 60mm
4. Assembly
4.1. ConnectiontoTopChestandRollcabseeg.4
4.1.1. Place the mid-box onto the roll cab. fit the connectors into the
rectangular holes and fasten with the screws provided.
4.1.2. Place the top chest onto top of the mid-box and t the connectors
into the top chest and fasten with the screws provided.
g.1
5. operAtion
5.1. to open drawers
5.1.1. To open: lift the drawer front whilst pulling it out (g.1).
5.1.2. To close: shut the drawer rmly until the latch engages.
5.1.3. If the drawer does not latch, the hook (g.1) may be misaligned or binding. Bend the hook gently until it is parallel to the drawer edge
and engages when closed.
5.2. to remove drawers
5.2.1. Pull drawer out almost fully.
5.2.2. Locate the black locking levers (gs. 2 & 3).
5.2.3. Facing the drawer; lift one lever up (g.2), and push the other lever down (g.3).
5.2.4. With both levers deployed, the drawer can be pulled out from the slides.
5.3. to replace drawers
5.3.1. extend the drawer runners from the cabinet.
5.3.2. engage the slides on either side of the drawer carefully into the runners.
5.3.3. Push the drawer closed squarely until the drawer is closed fully, engaging the locking levers as it goes.
© Jack sealey limited
Original Language Version
AP28102BR| Issue2(L)16/01/17
g.2
g.3
g.4
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.
importAnt: no liability is accepted for incorrect use of this product.
wArrAnty: guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
when the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
sole uK distributor, sealey group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
environmental protection
01284 757500
01284 703534
www.sealey.co.uk
web
sales@sealey.co.uk
AP28102BR| Issue2(L) 16/01/17
Loading...