Specifications Nytro 3131—Read Intensive
Capacity 15.36TB 7.68TB 3.84TB
Standard Model XS15360TE70004 XS7680TE70004 XS3840TE70004
Seagate Secure™ SED Model
1
XS15360TE70014 XS7680TE70014 XS3840TE70014
Seagate Secure FIPS 140-2/Common Criteria Model
1
XS15360TE70024 — —
Features
Interface Dual 12Gb/s SAS Dual 12Gb/s SAS Dual 12Gb/s SAS
NAND Flash Type 3D eTLC 3D eTLC 3D eTLC
Form Factor 2.5 in × 15mm 2.5 in × 15mm 2.5 in × 15mm
Performance—Single Port 12Gb\s
Sequential Read (MB/s) Sustained, 128KB
2
1050 1100 1100
Sequential Write (MB/s) Sustained, 128KB
2
1000 1000 1000
Random Read (IOPS) Sustained, 4KB
2
120,000 160,000 180,000
Random Write (IOPS) Sustained, 4KB
2
14,000 45,000 55,000
Random 30% Write (IOPS) Sustained, 4KB
2
40,000 120,000 130,000
Performance—Dual Port 12Gb\s
Sequential Read (MB/s) Sustained, 128KB
2
2100 2000 2100
Sequential Write (MB/s) Sustained, 128KB
2
1000 1550 1550
Random Read (IOPS) Sustained, 4KB
2
150,000 230,000 230,000
Random Write (IOPS) Sustained, 4KB
2
14,000 45,000 55,000
Random 30% Write (IOPS) Sustained, 4KB
2
40,000 120,000 130,000
Endurance/Reliability
Lifetime Endurance (Drive Writes per Day) 0.7 0.8 0.8
Total Bytes Wr itten (TB) 20,000 13,600 6800
Nonrecoverable Read Errors per Bits Read 1 per 10E17 1 per 10E17 1 per 10E17
Annualized Failure Rate (AFR) 0.35% 0.35% 0.35%
Warranty, Limited (years) 5 5 5
Power Management
+5/+12V Max Start Current (A) 0.80/0.21 0.80/0.21 0.80/0.21
Average Idle Power (W) 4.4 4.4 4.4
Physical
Height (mm /in, max)
3
15.00mm/0.591in 15.00mm/0.591in 15.00mm/0.591in
Width (mm/in, max)
3
70.10mm/2.760in 70.10mm/2.760in 70.10mm/2.760in
Depth (mm/in, max)
3
100.45mm/3.955in 100.45mm/3.955in 100.45mm/3.955in
Weight (g/lb) 165g/0.364lb 165g/0.364lb 165g/0.364lb
Carton Unit Quantity 10 10 10
Cartons per Pallet/Cartons per Layer 90/9 90/9 90/9
1 Not al l drives may be av ailabl e in all countries . Sea gate S ecure dri ves meet ISO/IEC 27 040 and NIST 800-88 s tandards and may require us e of TCG-compl iant hos t or con trolle r suppo rt.
2 Al l pe rformance m easured at queu e depth of 32 pe r PHY at b egin ning of li fe. Sys tem appli cati on performance m ay v ary based on SA S host an d prior s ys tem workload.
3 These base dec k di mensio ns c onform to the S mall Form Facto r Standard (SFF-8201) found at www.sf fcom mitt ee.org. For con necto r-related di mens ions, s ee SFF-8223 (SA S models ).