Seagate Technology reserves the right to make changes to the product(s) or information disclosed herein at any time without notice.
Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Nytro, Nytro WarpDrive and SeaTools are either trademarks or registered
trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report
a lower capacity. In addition, some of the listed capacity is used for formatti ng and other funct ions, and thus wil l not be available for data storage. Actual quantities will vary based on various factors, including file size, file
format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by
the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice,
product offerings or specifications.
For Seagate OEM and Distribution partner and Seagate reseller portal, visit: http://www.seagate.com/partners
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B 4
www.Seagate.comIntroduction
1. Introduction
The Seagate® Nytro® XF1230 SSDs provide high reliability and sustained performance for enterprise Server and
Storage products. The Nytro XF1230 series offers SATA interface, fully compatible with SATA 3.1 6.0Gb/s.
Table 1 Nytro XF1230 Card Features
FeatureDescription
Capacity
Certifications,
Eco-Compliance
Dimension
Endurance
Form
Interface
Compliance
Latency
NAND
240, 480, 960, 1920 GB
CE, UL, FCC, RCM, BSMI, KCC, Microsoft WHQL, SATA-IO
RoHS
(69.85±0.25) x (100±0.25) x (Max. 7) mmSSD Outer case can support suitable Z-height
for various host situations.
1> DWPD See Tab le 9 , Endurance, on page9.
2.5 Inch Standard SSD
Fully compliant with SATA revision 3.1, compatible with SATA 6.0Gb/s interface rates.
Fully compliant with ATA-8/ACS-4 Standard.
PIO, DMA, UDMA (up to 6, dependent on host) supported.
SATA 6.0Gb/s Native Command Queuing (NCQ): up to 32 commands.
SMART command transport (SCT) technology.
Data Set Management Command Trim support.
Read: 135 μs (Typ.)
Write: 55 μs (Typ.)
16 nm
Latency measured with transfer size 4 KB and
queue depth of 1 on a random workload, and
based on high density (1920 GB).
Performance
Random
(Sustained)
Performance
Sequential
(128 KB
Sustained)
Power
Consumption
Power Loss Protection
Power
Management
Power On Ready
Quality of
Service
4 KB Read: Up to 98K IOPS
4 KB Write: Up to 17K IOPS
8 KB Read: Up to 58K IOPS
8 KB Write: Up to 8K IOPS
Read: Up to 560MB/s
Write: Up to 490MB/s
Active: Up to 4.8 W
Idle: Up to 0.7 W
2.5 inch: 5 V SATA Supply
OS-aware hot plug/removal
Normal shut down: 5 s
Unsolicited shut down: 21 s
Read/Write: 0.2 ms / 1.4ms (99.9%)
Read/Write: 0.3 ms / 21ms (99.9999%)
Actual performance might vary depending on
use conditions and environment.
Typical I/O performance numbers measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
Actual performance might vary depending on
use conditions and environment.
Typical I/O performance numbers as measured
with a queue depth of 32, write cache enabled,
6Gb/s SAS chipset port, and the Intel RST driver.
RMS Average.
NOTEThis specification is for the 1920 GB drive;
smaller capacity drive have lower active
power.
Based on High Density (1920 GB).
Based on Random 4 KB, queue depth=1, and
1920 GB Density.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B5
www.Seagate.comIntroduction
Table 1 Nytro XF1230 Card Features (continued)
FeatureDescription
MTBF: 2 million hours
Reliability
Shock
Temperature
Range
BER: 1 error in 10
End-to-End data-path protection
Operating: 1500G, duration 0.5ms
Non-Operating: 1500G, duration 0.5ms
0°C to 70°C
Temperature Sensor (SMART Attribute ID 194)
17
bits transferred (exponential)
(Operating)
Vibration
Voltage
Operating:20G, 10~2 KHz (Frequency)
Non-Operating: 20G, 10~2 KHz (Frequency)
5V±5%
Warran ty
Weight
Five years limited Warranty with Media Usage, based on the shorter of term or endurance usage of
the drive.
up to 85g ±5%
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B6
www.Seagate.comSpecifications
2. Specifications
2.1Models and Capacity
Table 2 Nytro XF1230 Card Models
Device NameModel NamesUsable CapacityLBAs
Nytro XF1230 XF1230-1A0240240 GB468,862,128
Nytro XF1230 XF1230-1A0480480 GB937,703,088
Nytro XF1230 XF1230-1A0960960 GB1,875,385,008
Nytro XF1230 XF1230-1A19201920 GB3,750,748,848
2.2Performance
Table 3 Random Read/Write Input/Output Operations Per Second (IOPS)
NOTEPerformance measured with queue depth set to 32.
4 KB = 4,096 bytes, 8 KB = 8,192 bytes.
Drive write cache enabled.
Measurements performed on Full Logical Block Address (LBA) range, sustained
for 2x Drive Capacity.
Set to 4 KB alignment.
Performance test precondition: Drive is preconditioned with 2x drive capacity
128 KB write IOs.
Measured on system with Intel Xeon E5-2640v3 and C610 chipset with
on-board AHCI controller running Microsoft Windows® 2012 R2 DC. System
variations, such as using the Intel RST driver, might affect measured results.
MB/s = 1,000,000 bytes/second.
Seagate Nytro XF1230 SATA SSD Product Manual, Rev. B7
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.