Seagate ST740211DE-40GB, ST730212DE-30GB, ST760211DE-60GB User Manual
Product Manual
Lyrion Series IDE
ST760211DE
ST740211DE
ST730212DE
100441946
Rev. F
September 2007
Revision history
Revision Date Sheets affected or comments
Rev. A 01/04/07 Initial Release.
Rev. B 01/31/07 5.
Rev. C 04/11/07 1, 3, 4, 7, 11, 17 and 29.
Rev. D 05/04/07 Front cover, 1, 3 and 4.
Rev. E 06/22/07 22.
Rev. F 09/20/07 Front cover, 1, 3-4 and 25-26.
Copyright © 2007 Seagate Technology LLC. All rights reserved. Printed in U.S.A.
Publication number: 100441946, Rev. F September 2007
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC
in the United States and/or other countries. Lyrion Series, SeaTools and SeaTDD are either trademarks or
registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States
and/or other countries. All other trademarks or registered trademarks are the property of their respective
owners.
One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity
may vary depending on operating environment and formatting. Seagate reserves the right to change, with
out notice, product offerings or specifications.
-
Contents
1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Drive care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.4 Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.5 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.6 Time to ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.7 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7.4 Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.8 Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.1 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.2 Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.8.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.6 Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.8.7 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.9 Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.10 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.11 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.12 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.12.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.12.2 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.12.3 European Union Restriction of Hazardous Substances (RoHS) Directive . . . . . 15
2.12.4 China Restriction of Hazardous Substances (RoHS) Directive . . . . . . . . . . . . . 15
2.12.5 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.0 Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1 Handling and static discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.2 Drive installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.3 Mounting considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.0 Interface description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.1 Connector interface signals and connector pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.2.1 Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.2.2 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Lyrion Series IDE Product Manual, Rev. F i
ii Lyrion Series IDE Product Manual, Rev. F
List of Figures
Figure 1. Lyrion Series (IDE interface) disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Figure 2. Typical 3.3V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 3. Location where tri-axial accelerometer will be placed on Lyrion Series drives . . . . . . . . . . . . 10
Figure 4. Drive axis definition for Lyrion Series drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 5. Lyrion Series breather hole location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 6. Lyrion Series proper handling example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 7. Lyrion Series mechanical dimensions—top, side and end view . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 8. Lyrion Series FPC dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 9. Lyrion Series Area for Protective Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lyrion Series IDE Product Manual, Rev. F iii
iv Lyrion Series IDE Product Manual, Rev. F
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following Seagate® Lyrion
®
Series
• ST760211DE-60GB, ST740211DE-40GB and ST730212DE-30GB disc drives with an IDE interface.
These drives provide the following key features.
• 3,600-RPM spindle speed and a 2-Mbyte buffer combined for superior read/write performance.
• Quiet operation. Fluid Dynamic Bearing (FDB) motor.
• Perpendicular recording heads and EPRML technology, which provide the drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• 1500 G nonoperating shock, and 500 G operating shock.
• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
IDE drives:
Figure 1. Lyrion Series (IDE interface) disc drive
1.1 Disclaimer
Seagate Technology LLC makes no warranties whatsoever, including any warranty of merchantability, noninfringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal,
specification or sample. Seagate may not be held liable for any direct, indirect, incidental, special, exemplary,
or consequential damages (including, but not limited to, loss of use, data, or profits; procurement of substitute
goods or services; or business interruptions) however caused and on any theory of liability, whether in contract,
strict liability, or tort (including negligence or otherwise) arising in any way from the use of this kit, even if
advised of the possibility of such damage.
1.2 Drive care
Do not use the Lyrion Series disc drives outside of the ranges of environmental conditions found in Section 2.8,
"Environmental specifications." Doing so may void the warranty of the Lyrion Series disc drive.
Lyrion Series IDE Product Manual, Rev. F 1
2 Lyrion Series IDE Product Manual, Rev. F
2.0 Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal
power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate
ST760211DE, ST740211DE and ST730212DE model drives.
2.1 Overview
The specifications listed in this table are for quick reference. For details on specification measurement or
definition, see the appropriate section of this manual.
Table 1: Specifications
Drive specification ST760211DE ST740211DE ST730212DE
Formatted Gbytes 60 40 30
Guaranteed sectors 117,210,240 78,130,080 58,605,120
Bytes per sector (logical) 512
Cache (Mbytes) 2
Recording density, BPI (bits/inch average) 1,025,000
Track density. TPI (tracks/inch average) 165,000
2
Areal density (Gbits/inch
Spindle speed (RPM) 3,600
Internal data transfer rate OD (Mbits/sec max) 350
Sustained data transfer rate OD (Mbytes/sec) 24.5
I/O data-transfer rate (Mbytes/sec max) 66.7 (UDMA 4)
ATA data-transfer modes supported PIO modes 0–4;
Height 5.0 + 0.15 mm(0.1968 + 0.006 inches)
Width 54.0 +/-0.3 mm (2.1260 +/-0.0118 inches)
Length 71.0 +/-0.3 mm (2.7953 +/-0.0118 inches)
Weight 48.0 gm - 0.1058 lb. (typ)
Average latency (msec) 8.3
Power-on to ready (sec typical) 1.8
Standby to ready (sec typical) 1.8
Startup power (peak at 3.3v) (maximum RMS in 10ms window) 1.15 W
Read/write power (typical 3.3V) 1.0/0.9 W
Performance idle power (typical 3.3V) 0.5 W
Low power idle power (typical 3.3V) 0.3 W
Standby/Sleep power (typical 3.3V) 0.08 W
Voltage tolerance (including noise) 3.3V ± 5%
Ambient temperature 0° to 60°C (operating)
average) 169
Multiword DMA modes 0-2;
Ultra DMA modes 0–4
–40° to 70°C (nonoperating)
Lyrion Series IDE Product Manual, Rev. F 3
Table 1: Specifications
Drive specification ST760211DE ST740211DE ST730212DE
Temperature gradient (°C per hour max) 20°C (operating)
Relative humidity (noncondensing) 5% to 90% (operating)
Relative humidity gradient 30% per hour max
Wet bulb temperature (°C max) 33°C (operating)
Altitude, operating –60.98 m to 3,048 m (–200 ft to 10,000+ ft)
Altitude, nonoperating (below mean sea level, max) –60.98 m to 12,192 m (–200 ft to 40,000+ ft)
Shock, operating (Gs max at 2 msec) 500
Shock, nonoperating (Gs max at 1 msec) 1500
Vibration, operating
(max displacement may apply below 10 hz)
Vibration, nonoperating
(max displacement may apply below 22 hz)
Idle sound power (bels) (typical) 1.6
Operational sound power (bels) (typical) 2.2
Nonrecoverable read errors 1 per 10
Load/Unload (LUL) cycles 300,000 software-controlled
Warranty Per agreement
30°C (nonoperating)
5% to 95% (nonoperating)
40°C (nonoperating)
1.0 Gs (0 to peak, 10–500 Hz) @ 2 oct/min sweep rate
5.0 Gs (0 to peak, 10–500 Hz) @ 0.5 oct/min sweep rate
14
bits read
20,000 power loss
2.2 Formatted capacity
Model Formatted
capacity
ST760211DE 60 Gbytes 117,210,240 512
ST740211DE 40 Gbytes 78,130,080 512
ST730212DE 30 Gbytes 58,605,120 512
LBA mode addressing
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
Guaranteed
sectors
Bytes per
sector (logical)
2.3 Default logical geometry
Model Cylinders Heads Sectors
ST760211DE 116,280 16 63
ST740211DE 77,510 16 63
ST730212DE 58,149 16 63
4 Lyrion Series IDE Product Manual, Rev. F
2.4 Recording and interface technology
Technology Specification
Interface IDE (Parallel ATA)
Recording method Perpendicular Magnetic Recording
Recording density BPI (bits/inch average) 1,025,000
Track density TPI (tracks/inch average) 165,000
Areal density (Gbits/inch2 average) 169
Spindle speed (RPM) (± 0.2%) 3,600
Internal data-transfer rate OD (Mbits/sec max) 350
Sustained data transfer rate OD (Mbytes/sec max) 24.5
I/O data-transfer rate (Mbytes/sec max) 66.7 (UDMA 4)
Cache buffer (Mbytes) 2
2.5 Physical characteristics
Height (mm)
(inches)
Width (mm)
(inches)
Length (mm)
(inches)
Typical weight (grams)
(pounds)
Interface Connector 40-way ZIF
5.0 + 0.15
0.1968 + 0.006
54.0 +/-0.3
2.1260 +/-0.0118
71.0 +/-0.3
2.7953 +/-0.0118
48.0 (typ)
0.1058 lb. (typ))
2.6 Time to ready
Time to ready Typical
Power-On to Ready (sec) 1.8
Standby to Ready (sec) 1.8
Lyrion Series IDE Product Manual, Rev. F 5
2.7 Power specifications
The drive receives DC power (+3.3V) through the ZIF connector (IDE interface).
2.7.1 Power consumption
Power requirements for the drives are listed in the table on page 7. Typical power measurements are based on
an average of drives tested, under nominal conditions, using +3.3V input voltage at 25°C ambient temperature.
• Startup mode
Startup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
• Seek mode
During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does
not execute a read or write operation. Servo electronics are active. Seek power is measured based on three
random seek operations every 100 msecs.
• Read/write mode
Read/write power is measured with the heads on track, while the head is reading/writing from/to disc. It is
performed with 100 percent duty cycle of read/write operation.
• Performance Idle mode
During Performance Idle mode, the heads are on track but no reading or writing is done. The spindle motor is
spinning at full speed.
• Low power idle mode
During Low power Idle mode, the heads are unloaded but the spindle motor is spinning at full speed. Servo
and read/write electronics are in powered down mode.
• Standby / Sleep mode
During Standby/Sleep mode, the spindle motor is not spinning, and the servo and read/write electronics are
in powered down mode.
6 Lyrion Series IDE Product Manual, Rev. F
Loading...