U Series 6 Family Product Manual Addendum, Rev. A 1
Addendum for ST330610A, ST315312A,
ST310213A
This manual describes the functional, mechanical and interface specifications for the ST330610A, ST315312A and ST310213A. These drives
provide the following key features:
8.9 msec seek time, 5,400-RPM and 2 Mbyte buffer combine for
•
excellent desktop perfor ma nc e
Low power consumption
•
High instantaneous ( burst) data-tr ansfer rate s (up to 100 Mbyte s per
•
second) using Ultra DMA mode 5
Giant magnetoresistive (GMR) recording heads and GPRML technol-
•
ogy, which provide the drives with increased areal density
State-of-the-art cache and on-the-fly error-correction algorithms
•
Full-track multiple-sector transfer capability without local processor
•
intervention
Quiet operation
•
350 Gs nonoperating shock
•
The innovative, shock- ab so rb ing SeaS hi el d
•
against electrostatic discharge ( ESD) and other handling d amage. It
also includes installation instructions and jumper settings.
®
cover protects the drive
SeaTools diagnostic software performs a drive self-test that eliminates
•
unnecessary drive returns.
Support for S.M.A.R.T. drive monitoring and reporting
•
Support for drive self-test (DST) with S.M.A.R.T. Execute Off-line
•
Immediate
Support for Read Multiple and Write Multiple commands
•
Support for autodetection of master/slave drives that use cable select
•
(CSEL)
2001 Seagate Technology LLC. All rights reserved.
Publication Number: 100153584, Rev. A, April 2001
Addendum to 100129581, Rev. A
2 U Series 6 Family Product Manual Addendum, Rev. A
Specification summary table
The specifications listed in this table are for quick reference. For details
on specification measurement or definition, see the appropriate section
of this manual.
Drive Specification ST330610A ST315312A ST310213A
6
Formatted Gbytes (×10
Guaranteed sectors 58,633,344 29,336,832 20,005,650
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16
Default cylinders 16,383
Physical read/write heads 2 2 2
Discs 1 1 1
Recording density
BPI (bits/inch max) 562,436
Track density TPI (tracks/inch) 58,000
Areal density (Mbits/inch
Spindle speed (RPM) 5,400
Internal data-transfer rate
(Mbits/sec max)
I/O data-transfer rate
(Mbytes/sec max)
ATA data-transfer modes
supported
Cache buffer (Mbytes) 2
Height (mm max) 26.1
Width (mm max) 101.85
Length (mm max) 147.0
Weight (typical) 550 grams (1.2 lb)
Track-to-track seek time
(msec typical) 1.2 (read) 2.0 (write)
Average seek time
(msec typical) 8.9
bytes) 30.6 15.3 10.2
2
max) 32,622
436
100
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–5
2001 Seagate Technology LLC. All rights reserved.
Publication Number: 100153584, Rev. A, April 2001
Addendum to 100129581, Rev. A
U Series 6 Family Product Manual Addendum, Rev. A 3
Drive Specification ST330610A ST315312A ST310213A
Average seek read
(msec typical) 9.9
Average seek write
(msec typical) 10.9
Full-stroke seek time
(msec typical) 22.0 (read) 24.0 (write)
Average latency (msec) 5.55 msec
Power-on to ready (sec typical) 6.5 sec
Standby to ready (sec typical) 6.5 sec
Spindown (sec typical) 10 sec
Startup current
(typical) 12V (peak) 2.0/2.5 amps
Seek power (typical) 7.5 watts
Read/Write power 7.5 watts
Idle mode (typical) 5.0 watts
Standby mode (typical) 1.2 watts
Sleep mode (typical) 0.9 watts
Voltage tolerance
(including noise) 5V ± 5%, 12V ± 10%
Ambient temperature 0° to 60°C (op.), –40° to 70°C (nonop.)
Temperature gradient
(°C per hour max) 20°C
Relative humidity
(op. and nonop.)
Relative humidity gradient 30% per hour max
Wet bulb temperature (°C max) 29.4 (op.), 40.0 (nonop.)
Altitude, operating –60.96 m to 3,048 m (–200 ft to 10,000
Altitude (meters below mean sea
level, max) –121.92 m to 12,192 m (–400 ft to 40,000
Shock, operating
(Gs max at 2 msec) 63
Shock, nonoperating
(Gs max at 1 and 2 msec) 350 Gs
Vibration, operating 0.5 Gs (0 to peak, 22–350 Hz)
Vibration, nonoperating 5 Gs (0 to peak, 22–350 Hz)
5% to 90% (op.)
5% to 95% (nonop.)
+
+
ft)
ft)
2001 Seagate Technology LLC. All rights reserved.
Publication Number: 100153584, Rev. A, April 2001
Addendum to 100129581, Rev. A
4 U Series 6 Family Product Manual Addendum, Rev. A
Drive Specification ST330610A ST315312A ST310213A
Drive acoustics
Sound power in bels
Idle mode
Quiet Seek
Performance Seek
Nonrecoverable read errors 1 per 10
Mean time between
failures (power-on hours) 600,000
Contact start-stop cycles (25°C,
40% relative humidity) 50,000
SeaShield Yes
3.0 (typical), 3.3 (max)
3.2 (typical), 3.5 (max)
3.4 (typical), 3.7 (max)
13
bits read
Electromagnetic compatibility
Korean RRL
If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the
Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio
Research Laboratory (RRL) Ministry of Information and Communication
Republic of Korea. These drives have been tested and comply with the
Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS)
for Class B products. Dr ives are tested in a representative, end-user
system by a Korean-recognized lab.
EUT name (model numbers): ST330610A, ST315312A, ST310213A
•
Certificate numbers: E-H011-01-0713 (B), E-H011-01-0715 (B),
•
E-H011-01-0709 (B)
Trade name or applicant: Seagate Technology
•
Manufacturing date: April, 2001
•
Manufacturer/nationality: Singapore
•
2001 Seagate Technology LLC. All rights reserved.
Publication Number: 100153584, Rev. A, April 2001
Addendum to 100129581, Rev. A
Loading...