Seagate PS 110 User Manual

YEAR LIMITED WARRANTY

WWW.SEAGATE.COM

Visit us at our Support pages for assistance with

• Installation:

• Knowledge Base: FAQ’s, How to use this product

• Download Center: Installation software, utilities, and diagnostics

• Warranty Information

• And all of your other storage needs

A soft copy of your comprehensive User Guide is included with your product.

To contact Support, visit us at our Contact Us page.

© 2009 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, the Wave logo, and BlackArmor are trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions and will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications.

Seagate Technology LLC 920 Disc Drive Scotts Valley, CA 95066 U.S.A.

PN: 100566489B 05/09

Additional instructions and troubleshooting assistance

Portable Storage and Backup System

Quick Start Guide

FCC DECLARATION OF CONFORMANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CLASS B

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Thanks For Purchasing a BlackArmor® PS 110 Portable Storage and Backup System

Kit Contents

USB Cable

Connect

Seagate BlackArmor PS 110 Drive

Install

After drive is connected, software installer automatically launches.

Sold Separately

Docking Station

Optional dock not included.

Ask your retailer or visit www.seagate.com.

Optional

Follow the on-screen instructions.

If the installation does not begin automatically, launch it manually by clicking Start and then Run.Typ e e:\setup.exe when the Run dialog

box displays (where “e” is the drive letter of

your Black Armor PS 110 drive).

RECOMMENDED: Create Recovery CD

Be sure to create a system recovery CD using BlackArmor Backup Software. Your system and data can be restored using this CD. See the BlackArmor® Backup User Guide for instructions.

When disconnecting the drive, ensure that you use the safely remove hardware feature. Right-click this icon in the notification area and then follow the instructions.