Seagate Momentus 5400.3 Blade Server Product Manual

Product Manual

Momentus®5400.3 Blade Server

ST9160821AB ST9120822AB ST9100828AB ST980815AB ST960815AB ST9402116AB

100409994 Rev . B August 2007

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate

Technology LLC in the United States and/or other countries. Momentus, SeagateSeaBOARD, SeaFONE, SeaTDD, and SeaTools are either trademarks or registered trademarks of Seagate Te chnolog y LLC or one of it s af filiate d comp a nies in the United States a nd/ or other countries. All other trademarks or registered trademarks are the property of their respective owners.

One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative p urpo ses. Actual quan tities w ill vary based on vari ou s factors, including fi le size, file format, features and application software. Seagate reserves the right to change, without notice, product offerings or specifications.

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Contents

1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Specification summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4 Physical organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.5 Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.6 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.7 Seek time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.8 Time to ready. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.9 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.9.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.9.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.9.3 Voltage tolerance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.10 Environmental specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.10.1 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.10.2 Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.10.3 Humidity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.10.4 Altitude. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.10.5 Shock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.10.6 Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.11 Acoustics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.12 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.13 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.14 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.14.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.14.2 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.14.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.15 Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.15.1 European Union Restriction of Hazardous Substances (RoHS) . . . . . . . . . . . . 19

2.16 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.0 Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1 Handling and static discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2 Jumper settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.2.1 Master/slave configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.2.2 Cable-select option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.3 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 ATA interface signals and connector pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1.1 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.1.2 Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.1.3 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

iii

List of Figures

Figure 1. Typical 5V startup and operation current profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 2. Jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 3. Mounting dimensions—top, side and end view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

1.0 Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus®5400.3 drives:

• ST9160821AB

• ST9120822AB

• ST9100828AB

• ST980815AB

• ST960815AB

• ST9402116AB These drives provide the following key features:

• 5,400-RPM spindle speed

• 8-Mbyte buffer

• Quiet operation. Fluid Dynamic Bearing (FDB) motor.

• High instantaneous (burst) data transfer rates (up to 100 Mbytes per second) using Ultra DMA mode 5.

• Tunneling Magnetoresistive (TMR) recording heads.

• State-of-the-art cache and on-the-fly error-correction algorithms.

• Full-track multiple-sector transfer capability without local processor intervention.

• 900 Gs nonoperating shock and 350 Gs operating shock.

• SeaTools™ diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

• The 3D Defense S ystem ™, which i nclude s Drive D efen se, Dat a Defe nse, and Diagnostic Defense , of fers the

industry’s most comprehensive protection for disc drives.

• Support for S.M.A.R.T. drive monitoring and reporting.

• Support for Read Multiple and Write Multiple commands.

• Support for autodetection of master/slave drives using cable select (CSEL).

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

2.0 Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate ST9160821AB, ST 91208 22A B, ST 9100 828AB , S T980 815AB , ST960 815A B , and ST9402 116A B model d rives.

2.1 Specification summary

The specifications listed in this table are for quick reference. For details on specification measurement or

definition, see the appropriate section of this manual.

Table 1: Specifications for 160 and 120 Gbyte models

Drive specification ST9160821AB ST9120822AB

Formatted Gbytes (512 bytes/sector)* 160 120 Guaranteed sectors 312,581,808 234,441,648 Bytes per sector 512 Physical read/write heads 4 3 Discs 2 Cache (Mbytes) 8 Recording density , BPI (bits/inch typical) 835k Track density, TPI (tracks/inch typical) 150k Areal density (Gbits/inch2 max) 132 Spindle speed (RPM) 5,400 Internal data transfer rate (Mbits/sec max) 352 I/O data-transfer rate (Mbytes/sec max) 100 ATA data-transfer modes supported PIO modes 0–4

Multiword DMA modes 0–2 Ultra DMA modes 0–5

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Table 1: Specifications for 160 and 120 Gbyte models

Drive specification ST9160821AB ST9120822AB

Seek power (typical) 2.0 watts Read/write power (typical) Read: 2.0 watts; Write: 1.8 watts Idle mode (typical, low power) 0.8 watts Standby mode 0.2 watts (typical)*** Sleep mode 0.2 watts (typical)*** Voltage tolerance (including noise) 5V ± 5% Ambient temperature 0° to 40°C (operating), –40° to 70°C (nonoperating)

Temperature gradient (°C per hour max, noncondensing)

Relative humidity (noncondensing)

Relative humidity gradient 30% per hour max Wet bulb temperature (°C max) 30°C (operating)

Altitude, operating –304.8 m to 3,048 m (–1000 ft to 10,000 ft) Altitude, nonoperating (below mean sea level) –304.8 m to 12,192 m (–1,000 ft to 40,000 ft) max Shock, operating (Gs max at 2 msec) 350 Shock, nonoperating (Gs max at 2 msec) 800 Shock, nonoperating (Gs max at 1 msec) 900 Shock, nonoperating (Gs max at 0.5 msec) 400 Vibration, operating (max displacement may apply below 10 hz) 1.0 Gs (0 to peak, 5–500 Hz) Vibration, nonoperating (max displacement may apply below 22 hz) 5.0 Gs (0 to peak, 5–500 Hz) Drive acoustics, sound power (bels), 2 disc Idle** 2.4 (typical)

Performance seek 3.0 (typical)

Nonrecoverable read errors 1 per 1014 bits read Annualized Failure Rate (AFR) <1.79% Load/Unload (U/UL) cycles

25°C, 50% relative humidity

32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 20% relative humidity 60°C, 20% relative humidity

Warranty 5 years on distribution units.

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

***Typical notebooks will pull power to the dr ive when ente ring S3 and S4; while in the S3 and S4 state s, drive sleep and drive standby

modes will not contribute to battery power consumption.

Duty 50%, Power-on Hours (POH): 8760/year 20°C (operating)

30°C (nonoperating) 5% to 90% (operating)

5% to 95% (nonoperating)

38°C (nonoperating)

2.6 (max)

3.2 (max)

600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles

To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the “V eri fy Your War ranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Table 1: Specifications for 100 and 80 Gbyte models

Drive specification ST9100828AB ST980815AB

Formatted Gbytes (512 bytes/sector)* 100 80 Guaranteed sectors 195,371,568 156,301,488 Bytes per sector 512 Physical read/write heads 3 2 Discs 2 1 Cache (Mbytes) 8 Recording density , BPI (bits/inch typical) 835k Track density, TPI (tracks/inch typical) 150k Areal density (Gbits/inch2 max) 132 Spindle speed (RPM) 5,400 Internal data transfer rate (Mbits/sec max) 352 I/O data-transfer rate (Mbytes/sec max) 100 ATA data-transfer modes supported PIO modes 0–4

Height 9.5 +/-0.2 mm (0.374 +/-.008 inches) Width 69.85 +/-0.25 mm (2.750 +/-0.010 inches) Length 100.50 +/-0.25 mm (3.957 +/-0.010 inches) Weight (typical) 100 grams (0.22 lb) 96 grams (0.21 lb) Average latency (msec) 5.6 Power-on to ready (sec typical) 3.0 Standby to ready (sec typical) 3.0 Track-to-track seek time (msec typical) 1.0 (read), 1.5 (write) Average random seek , write (msec typical) 13.0 Average random seek, read (msec typical) 11.0 Average random seek, (msec typical) 12.5 Full-stroke seek (msec) 22 (typical); 24 (max) Startup current 5V (typical) 1.0 amps Seek power (typical) 2.0 watts Read/write power (typical) Read: 2.0 watts; Write: 1.8 watts Idle mode (typical, low power) 0.8 watts Standby mode 0.2 watts (typical)*** Sleep mode 0.2 watts (typical)*** Voltage tolerance (including noise) 5V ± 5% Ambient temperature 0° to 40°C (operating), –40° to 70°C (nonoperating)

Temperature gradient (°C per hour max, noncondensing)

Relative humidity (noncondensing)

Relative humidity gradient 30% per hour max Wet bulb temperature (°C max) 30°C (operating)

Multiword DMA modes 0–2 Ultra DMA modes 0–5

Duty 50%, Power-on Hours (POH): 8760/year 20°C (operating)

30°C (nonoperating) 5% to 90% (operating)

5% to 95% (nonoperating)

38°C (nonoperating)

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Table 1: Specifications for 100 and 80 Gbyte models

Drive specification ST9100828AB ST980815AB

Shock, nonoperating (Gs max at 1 msec) 900 Shock, nonoperating (Gs max at 0.5 msec) 400 Vibration, operating

(max displacement may apply below 10 hz) Vibration, nonoperating

(max displacement may apply below 22 hz) Drive acoustics, sound power (bels), 2 disc Idle** 2.4 (typical)

Performance seek 2.9 (typical )

Nonrecoverable read errors 1 per 1014 bits read Annualized Failure Rate (AFR) <1.79% Load/Unload (U/UL) cycles

25°C, 50% relative humidity

32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 20% relative humidity 60°C, 20% relative humidity

Warranty 5 years on distribution units.

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

***Typical notebooks will pull power to the dr ive when ente ring S3 and S4; while in the S3 and S4 state s, drive sleep and drive standby modes will not contribute to battery power consumption.

1.0 Gs (0 to peak, 5–500 Hz)

5.0 Gs (0 to peak, 5–500 Hz)

2.6 (max)

3.1 (max)

600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles

T o determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Table 1: Specifications for 60 and 40 Gbyte models

Drive specification ST960815AB ST9402116AB

Formatted Gbytes (512 bytes/sector)* 60 40 Guaranteed sectors 117,210,240 78,140,160 Bytes per sector 512 Physical read/write heads 2 1 Discs 1 Cache (Mbytes) 8 Recording density , BPI (bits/inch typical) 835k Track density, TPI (tracks/inch typical) 150k Areal density (Gbits/inch2 max) 132 Spindle speed (RPM) 5,400 Internal data transfer rate (Mbits/sec max) 352 I/O data-transfer rate (Mbytes/sec max) 100 ATA data-transfer modes supported PIO modes 0–4

Height 9.5 +/-0.2 mm (0.374 +/-.008 inches) Width 69.85 +/-0.25 mm (2.750 +/-0.010 inches) Length 100.50 +/-0.25 mm (3.957 +/-0.010 inches) Weight (typical) 96 grams (0.21 lb) Average latency (msec) 5.6 Power-on to ready (sec typical) 3.0 Standby to ready (sec typical) 3.0 Track-to-track seek time (msec typical) 1.0 (read), 1.5 (write) Average random seek , write (msec typical) 13.0 Average random seek, read (msec typical) 11.0 Average random seek, (msec typical) 12.5 Full-stroke seek (msec) 22 (typical); 24 (max) Startup current 5V (typical) 1.0 amps Seek power (typical) 2.0 watts Read/write power (typical) Read: 2.0 watts; Write: 1.8 watts Idle mode (typical, low power) 0.8 watts Standby mode 0.2 watts (typical)*** Sleep mode 0.2 watts (typical)*** Voltage tolerance (including noise) 5V ± 5% Ambient temperature 0° to 40°C (operating), –40° to 70°C (nonoperating)

Temperature gradient (°C per hour max, noncondensing)

Relative humidity (noncondensing)

Relative humidity gradient 30% per hour max Wet bulb temperature (°C max) 30°C (operating)

Multiword DMA modes 0–2 Ultra DMA modes 0–5

Duty 50%, Power-on Hours (POH): 8760/year 20°C (operating)

30°C (nonoperating) 5% to 90% (operating)

5% to 95% (nonoperating)

38°C (nonoperating)

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Table 1: Specifications for 60 and 40 Gbyte models

Drive specification ST 960815AB ST9402116AB

Shock, nonoperating (Gs max at 1 msec) 900 Shock, nonoperating (Gs max at 0.5 msec) 400 Vibration, operating

(max displacement may apply below 10 hz) Vibration, nonoperating

(max displacement may apply below 22 hz) Drive acoustics, sound power (bels), 2 disc Idle** 2.4 (typical)

Performance seek 2.9 (typical)

Nonrecoverable read errors 1 per 1014 bits read Annualized Failure Rate (AFR) <1.79% Load/Unload (U/UL) cycles

25°C, 50% relative humidity

32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 20% relative humidity 60°C, 20% relative humidity

Warranty 5 years on distribution units.

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

***Typical notebooks will pull power to th e drive when ente ring S3 and S4; while in the S3 and S4 states, dr ive sleep and drive standby

modes will not contribute to battery power consumption.

1.0 Gs (0 to peak, 5–500 Hz)

5.0 Gs (0 to peak, 5–500 Hz)

2.6 (max)

3.1 (max)

600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles

To determine the warranty for a specific drive, use a web browser to access the following web page: www.seagate.com/support/service/ From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.

+ 32 hidden pages

Seagate Momentus 5400.3 Blade Server Product Manual

Specifications and Main Features

Frequently Asked Questions

User Manual