Seada SD-MV-0901 User Manual

SD-MV-0901

9x1 HDMI Seamless Switcher
with Multi-view

VER 1.0

Thank you for purchasing this product

For optimum performance and safety, please read these instructions caref­ully before connecting, operating or adjusting this product. Please keep this
manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.

Table of Contents

1. Introduction.........................................................................................

2. Features...............................................................................................

3. Package Contents..............................................................................

4. Specifications......................................................................................

5. Operation Controls and Functions....................................................

5.1. Front Panel..................................................................................

5.2. Rear Panel..................................................................................

6. Detail description of display mode...................................................

7. Remote Control...................................................................................

8. Web GUI User Guider..........................................................................

9. Application Example..........................................................................

2
2
2
3
4
4
5
6
8
9
12

1/12

1/12

1. Introduction

The 9x1 seamless switcher supports 9 HDMI inputs and one HDMI output.
It allows user can view up to 9 HD video contents on one display at the
same time. Output resolution can be chosen for supporting legacy display.
This switcher is a suitable solution for presentation purpose at classroom
and conference room.

2. Features

☆ HDMI 1.4b, HDCP 1.4 compliant.
☆ Input video resolution up to 1080p@60Hz, Output up to 4K2K@30Hz
☆ 9x HDMI inputs, 1x HDMI and 1x de-embedded analog audio output
☆ Fast seamless switching with scaling up to 3840x2160p (4K)
☆ Supports 1/2/4/9 windows multi-view modes
☆ Display 4x full HD signals within one 4K display with pixel-to-pixel quality
☆ Control is via on-panel button, IR, RS-232, LAN or Web GUI
☆ 1U rack mounted design

3. Package Contents

① 1x 9×1 HDMI Seamless Switcher
② 1x 12V/1A Power Adaptor
③ 1x Remote Control
④ 1x User Manual

Website: www.seada.co.uk E-mail: [e-mail]

2/12

4. Specifications

Technical

HDMI Compliance HDMI 1.4b

HDCP Compliance HDCP 1.4
Video Bandwidth 3Gbps
Video Resolutions
Color Depth 8-bit
Color Space RGB, YUV4:4:4, YUV 4:2:2
HDMI Audio

Formats

ESD Protection

Connections

Inputs

Outputs

Mechanical

Housing

Color Black

Dimensions

Weight

Power Supply

Power
Consumption

Operating
Temperature
Storage
Temperature

Relative Humidity

4K2K@30Hz YUV4:4:4、RGB4:4:4

LPCM 2.0

Human-body Model：
±8kV (Air-gap discharge) , ±4kV (Contact discharge)

9x HDMI Type A [19-pin female]
1x RJ45 [8-pin female]
1x RS-232 [Phoenix jack]
1x USB [USB-A]
1x IR EXT [3.5mm Stereo Mini-jack]

1x HDMI Type A [19-pin female]
1x Audio Out [3.5mm Stereo Mini-jack]

Metal Enclosure

440mm (W)×200mm (D)×44.5mm (H)

2.26kg
Input: AC100~240V 50/60Hz, Output: DC12V/1A

(US/EU standards, CE/FCC/UL certified)

7.8W (max)

0°C ~ 40°C / 32°F ~ 104°F

-20°C ~ 60°C / -4°F ~ 140°F

20~90% RH (non-condensing)

Website: www.seada.co.uk E-mail: [e-mail]

3/12

5. Operation Controls and Functions

5.1 Front Panel

RRESSEETT

1 2 3 4

Number Name Function descriptions

RESET button

1

and LED

LOCK button

2

and LED

3 IR

66 7 8 9

OUTAUDIO/IP

5

4

Press this button up to 10s to reset to factory set, the
indicator LED will blink 5 times.

Press this button to lock all buttons on the panel, the
indicator LED is on. Press this button again is unlock,
the indicator LED is off.

IR receiver window, it receive IR remote control
signal.

INPUT 1~9 button: Press this button to select HDMI
input source from 1 to 9.
AUDIO/IP button: a. Select output audio signal from
HDMI input . For example, when user want to select
input 1 port audio to output audio port, press AUDIO/
IP button→INPUT 1 button. In this time, the AUDIO/

4 INPUT button

IP indicator LED is blink 3 times.
b. Long press this button up to 6s will output the unit
IP address on screen display.
IN/OUT button: When user need select multi-screen
output, firstly user need select multi-screen mode
button, then through operate IN→x→OUT→y to
select output screen.
Please see the below detail description.

Multi-screen

5

mode button

RESOLUTION

6

button

Press these button to select display mode.

Press this button to select output resolution.

6

Website: www.seada.co.uk E-mail: [e-mail]

4/12

5.2 Rear Panel

1

2

3 4

Number Name Function descriptions

1

HDMI INPUT
Area

Connect to the HDMI input source device, such as
DVD player or Set top box.

HDMI OUTPUT: Connect to the HDMI output

HDMI OUTPUT

2

Area

device, such as TV or Monitor.
AUDIO OUTPUT: Connect to audio amplifier. This
audio volume can be adjust through Remote
Control or Web GUI software.

RJ45: This port is the link for Web GUI or PC
control, connect to an active Ethernet link with an
RJ45 terminated cable.

3

CONTROL
ports

USB: Upgrade Fireware.
IR EXT: IR extend receiver port, connect to IR

receiver cable.
RS-232: Connect to a PC or control system for
transmission RS-232 commands or upgrade MCU
firmware.

4 DC 12V

Plug the 12V/1A adaptor to AC wall outlet for power
supply.

Website: www.seada.co.uk E-mail: [e-mail]

5/12

6. Detail description of display mode

The 9×1 HDMI Seamless Switcher have 4 display modes.

MODE1:The 9x1 HDMI Seamless Switcher will display nine HDMI inputs separately.
Switch to the front panel or remote control MODE button. Operating illustration: select
MODE 1 button→select HDMI input source button [MODE 1 button( )→x].

MODE1-9×1 Seamless Switcher

MODE2: The 9×1 HDMI Seamless Switcher devides two HD inputs and display on a
screen. Select input signal source to different display screen. Operating illustration:
press MODE 2 button(If you want to output the other display mode, please press this
button two times continuously.)→press IN button→press HDMI input source button→
press OUT button→press HDMI input source button(MODE 2 button→IN→x→OUT→y).
For example, if user need the second screen from the third HDMI input port [MODE 2
button( )→IN→3→OUT→2].

The 1st screen The 2nd screen

The 1st screen

The 2nd
screen

MODE2-2×1 Multi-Viewer

Website: www.seada.co.uk E-mail: [e-mail]

6/12

MODE3: The 9×1 HDMI Seamless Switcher devides four HD inputs and display on a
screen. Select input signal source to different display screen. Operating illustration:
press MODE 3 button(If you want to output another display mode, please press this
button continuously. )→press IN button→press HDMI input source button→press OUT
button→press HDMI input source button(MODE 3 button→IN→x→OUT→y). For
example, if user need the fourth screen from the third HDMI input port [MODE 3 button
( )→IN→3→OUT→4].

The 2nd

The 1st screen The 2nd screen

The 3rd screen The 4th screen

The 2nd
screen

The 3rd
screen

The 4th
screen

The 1st screen

The 1st screen

The 2nd
screen

The 1st screen

The 3rd
screen

screen

The 3rd
screen

The 4th
screen

The 4th
screen

MODE3-4×1 Multi-Viewer

MODE4: The 9×1 HDMI Seamless Switcher devides nine HD inputs with same size and

display on a screen. Select input signal source to different display screen. Operating
illustration: press MODE 4 button→press IN button→press HDMI input source button→
press OUT button→press HDMI input source button(MODE 4 button→IN→x→OUT→y).
For example, if user need the sixth screen from the first HDMI input port [MODE 4 button
( )→IN→1→OUT→6].

The 1st screen The 2nd screen The 3rd screen

The 4th screen The 5th screen The 6th screen

The 7th screen The 8th screen The 9th screen

MODE4-9×1 Multi-Viewer

Website: www.seada.co.uk E-mail: [e-mail]

7/12

7. Remote Control

Reset

Input

1 2 3 In

4 5 6 Out

7 8 9 Audio

Output

RES IP

Volume

VOL- VOL+ Mute

9×1 MULTI-VIEWER

Reset: Long press this botton up to 10s to reset to factory

set. Input 1~9: Press these button to select input source.
In/Out: When user need select Output multi-screen, firstly
user need select the remote control Output multi-screen
mode button, then through operate In→x→Out→y to select
output screen.
Please see the above detail description.
Audio: Select output audio signal from HDMI input port.
For example, When user want to select input 1 port audio
to output audio port, press Audio button→Input 1 button.

: Press these button to select display
mode.

RES: Cycling select resolution output.
(1024×768/1360×768/720P/1080I/1080P/4K)
IP: Press this button, the output screen left top
concer will display the unit IP address.

VOL-/VOL+: Adjust audio volume output.
Mute: No volume output.

Website: www.seada.co.uk E-mail: [e-mail]

8/12

8. Web GUI User Guide

The switcher can be controlled via Web GUI software through RJ45 port. You should
know current switcher IP address. The static IP address is 192.168.1.100. You can
connect PC Web GUI through dynamic IP adress. If you don’t know dynamic IP address,
Long press AUDIO/IP button up to 6s, the output screen left top concer will display
dynamic IP address. Then you should set the IP address to your PC or laptop or mobile
device is within the same IP address segment with the switcher. After above, you can
enter the switcher IP address in the web browser to access Web GUI.

General mode

1

2

① Select output screen mode.
② When you have selected output screen mode, then you can select output
screen corresponding input signal source.（The order is from left to right and
from top to buttom.）

Website: www.seada.co.uk E-mail: [e-mail]

9/12

Video mode

1 2

3

① Set the video picture interface, it contrains Contrast set, Brightness set, Hue set,
Saturation set, H Size set and V Size set.

② Select output Resolution and Aspect Ration.
③ Set EDID.

Audio mode

1 2

① Set volume: Adjust the volume or select the audio delay(ms).
② Audio Select: Select the output audio corresponding HDMI input signal source.

Website: www.seada.co.uk E-mail: [e-mail]

10/12

Network mode

1 2

① Network Configuration
DHCP switch, Status button: Obtian the network configuration information,
including IP address, Subnet, Gateway and MAC address.
Set port: Set TCP/IP port.
② Status Log: Display the Network Configuration information.

Advanced mode

1

2

3

4

5

6

① Beep: Buzzer switch.
② Factory Reset: Click this botton to reset to factory set.
③ Serial Baudrate: Select the serial baudrate.
④ OSD Time Out: Select the OSD display time.
⑤ SOC Update: SOC chip update.
⑥ MCU Update: MCU version update.

Website: www.seada.co.uk E-mail: [e-mail]

11/12

9. Application Example

Website: www.seada.co.uk E-mail: [e-mail]

12/12