Sea Breeze 18H43ZGX, 12H43ZGX User Manual

INSTALLATION

INSTRUCTIONS

MINI-SPLIT

HEAT PUMP

FOR MODELS:

12H43ZGX
18H43ZGX

950-0032-REV-E 12-14-06

TABLE OF CONTENTS

MODEL NUMBERS……………………………………………………………………………2
UNIT PARTS & FEATURES……………………………………………………………………3
INSTALLATION DIMENSION DIAGRAM……………………………………………………4
SAFETY WARNINGS……………………………………………………………………………5
SELECTION OF INSTALLATION LOCATIONS………………………………………………6
INDOOR UNIT INSTALLATION………………………………………………………………8
OUTDOOR UNIT INSTALLATION……………………………………………………………11
TESTING………………………………………………………………………………………13
PRINCIPLE……………………………………………………………………………………15
SPECIFICATIONS………………………………………………………………………………17
WARRANTY……………………………………………………………………………………18

TECHNICAL SUPPORT

IF YOU NEED TECHNICAL SUPPORT PLEASE CALL

1-[phone]

SEA BREEZE Installation Kit is recommended.

Catalog number can be located on page 17.

1

MODEL NUMBERS

Heat Pump

SYSTEM MODEL Indoor Unit 12H43ZIGX
12H43ZGX Outdoor Unit 12H43ZOGX

12,000 BTU 208-230 VAC
13 SEER

SYSTEM MODEL Indoor Unit 18H43ZIGX
18H43ZGX Outdoor Unit 18H43ZOGX

18,000 BTU 208-230 VAC
13 SEER

2

UNIT PARTS & FEATURES

3

INSTALLATION DIMENSION DIAGRAM

4

SAFETY WARNINGS

z Use Copper Wires only for Power Supply.
z Risk of electric shock can cause injury or death. Disconnect all electric power

supplies before servicing or installation

z Do not use excessive torque on flare nuts during connection of the

refrigeration tubes, or service valve on discharge line may be damaged.

z Do not install indoor unit in damp or wet locations.
z Electrical installation must be done by a qualified technician according to the

instruction manual and in accordance with local electrical standards.

z Certified Power supply conductors must be used.

5