Page 1
iCVBT10 Vanity Mirror - Quick Start Guide (English)
Size: 153 x 140 mm (folded)
Color: 2C + 2C (PMS Cool Gray 9C & PMS Uncoated 2705U)
Material: 120 gsm WF paper
Date: April 27, 2018 (cost down)
iHome Beauty
REFLECT
PRO
PMS Cool Gray 9C PMS uncoated 2705 U
iCVBT10/iCVBT10N
Quick Start Guide
Page 2
Charging Mirror
• Connect included AC adapter to DC jack on back of mirror
!
and the other end to a working wall outlet
Red
Battery
Status
LED
outlet
Charging Devices
Mirror MUST be connected to power for USB charging from the unit.
• Connect USB cable (not included) to USB port
and the other end to your device to charge.
Battery Level Indicators
Red Battery Status LED
Charging = solid red
Fully charged = o
Low Battery = flashing red (mirror is ON, not being charged)
• Press and hold the light button for 2 seconds to hear voice
announce battery charge status (mirror must be ON).
Charge your phone while getting ready!
Blue Bluetooth
Status
LED
Bluetooth
Button
Page 3
Light Function
• Press light button to turn ON Hi/Mid/Lo/OFF
for the best light brightness
You look
Amazing!
Page 4
Detail Mirror
• Attach included 10x magnifying detail mirror
wherever you like on the mirror face (or anywhere!)
• This mirror comes with a cleaning cloth to
keep the large surface and detail mirror smudge free.
• The back of the spot mirror has SimpleStick™
micro suction material for easily attaching and
detaching almost anywhere. For best results,
clean SimpleStick material with oce tape.
• If more cleaning is need try washing with
mild soap and water as needed.
Perfect for eyeliner, eyebrow tweezing and more!
Page 5
Bluetooth Audio Function
• Press power button to turn speaker On or O
• When mirror is On, press and hold the Bluetooth button on back
of mirror for pairing mode, indicated by the blinking BLUE LED
• Select “iHome REFLECT PRO” on your device’s
Bluetooth menu to connect
• Press to play / pause Bluetooth audio
• Press to answer/end Bluetooth calls
• Press and hold for 2 seconds to decline Bluetooth calls
• Quick double press for next track
• Quick triple press for previous track
• Press and hold for 2 seconds and wait for beep to activate
voice control with Siri®
• Press to lower or raise volume
Voice control requires an active internet connection on connected Bluetooth device
with iOS 10 and Android 4.1 and later. When activated, the speaker microphone acts as
an extension of the microphone in your smartphone to make/take calls, enable you to
ask Siri®/Google Assistant™ to play music and more.
/
Google Assistant™
Go ahead, turn UP the volume!
Page 6
Other Devices
• Connect non-bluetooth devices using the
included cable and AUX IN jack.
• AUX IN audio works when Bluetooth audio is
paused on connected Bluetooth device.
AUXRESET USB
Page 7
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential
electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for
future reference. Take special note of all warnings listed in these instructions and on the unit.
GENERAL
• Please exercise caution when in use as the mirror is made of glass.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated
on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet,
which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce
heat. Do not use around aerosol products or in the presence of oxygen being administered.
4. Sunlight – Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to become focused and cause excessive heat and/or
fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes.
5. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
6. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.
7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.
8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
9. Attachments – Do not use attachments not recommended by the product manufacturer.
10. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or
when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
11. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
12. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from
the unit to prevent damage or corrosion.
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not
covered in the operating instructions should be referred to qualified service personnel
15. Follow all instructions.
16. Clean mirror surface only with included dry cloth.
17. Only use attachments/accessories specified by the manufacturer.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
QDID: B020415
Page 8
FCC ID: EMOICVBT10N
IC: 986B-ICVBT10N
IC Statement for RF Device
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs
peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
For warranty and full instructions
visit: www.ihome.com/support
© 2018 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
Siri is a trademark of Apple, Inc. in the United States and other countries.
Google Assistant is a trademark of Google, Inc.
April 27, 2018
iCVB10-180427-B
Printed in China
Loading...