SDI Technologies IBTW450 User Manual
Model: iBTW450
Dual Charging Stereo Speaker
System + Dual Alarm
QUESTIONS? Visit www.ihome.com/support
WELCOME
Thank you for choosing the iBTW450 from iHome. This user guide
will get you up and running quickly and provide helpful hints to
maximize enjoyment. For more information about this and other
iHome products, please visit www.ihome.com
GETTING STARTED
This unit ships with the following items. Please check to see that all
items are present.
1 iBTW450 speaker system
2 100-240V Universal AC power adaptor
1
2
1
FEATURES & FUNCTIONS
Top panel
Wireless charging pad
Power On/O
Button
Volume
Control
Buttons
Alarm 1/Alarm 2
Buttons
Back panel
DC jack
Display
Wireless Charging
Bluetooth Indicator
Indicator
Sleep Button
charging
PM Indicator
Alarm Time/Date Display
Wake-To/Mode Indicators
(Tone/BT/(Bluetooth)Aux)
DC 9V 3A
USB
port
Snooze/Dimmer
Button
DST
Switch
Time Display
t
a
l
k
/
d
n
e
Clock
Button
p
a
g
i
n
r
i
Bluetooth
Pairing
Button
Sleep Mode Indicator
Talk/End Call
Button
Mode Button
Play/Pause Button
+/– Settings
Buttons
Aux-in jack
Alarm 1 Indicator
Alarm 2 Indicator
Low Battery Backup
Indicator
2
CONNECTING AC ADAPTER
This unit operates on AC power
using the included 100V-240V
universal AC adaptor. Place unit on
a stable surface. Plug the power
adaptor into the DC jack on back of
the unit and the other end into a
working wall socket.
DC 9V 3A
BACKUP BATTERY
The iBTW450 ships with a CR2450 battery installed for backup to provide
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally disconnected,
the display backlight will not remain lit, but current time and alarm time settings
will be temporarily maintained. Otherwise, you must reset the time and alarm
settings.
Note: The Battery Low icon is located on the clock display. When the
backup battery is low and needs to be replaced, the Battery Low icon
will flash. To replace, follow steps on next page.
3
BACKUP BATTERY (CONTINUED)
1. Please make sure the AC adaptor is connected. Otherwise all settings
may be lost during battery replacement.
2. Use a Phillips screwdriver to open the backup battery compartment
door located on the bottom of the unit.
3. Remove the exhausted battery. Insert
a new CR2450 battery by easing it
under the tabs in the battery well and
pressing down. Make sure the side
marked + is facing up.
4. Close the battery compartment door
and tighten the battery door screw.
Note: Make sure you dispose of battery properly (see your local
regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled,
shorted, recharged, exposed to water, fire, or high temperatures.
Do not place loose batteries in a pocket, purse, or other container
containing metal objects, mix with used or other battery types, or
store with hazardous or combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and regulations for
transport and disposal.
4
Loading...