SDI Technologies IBTW23 User Manual
Model iBTW23
Dual alarm Clock with
Qi Wireless Charging and
USB Charge Port
QUESTIONS? Visit www.ihome.com
WELCOME
Thank you for choosing the iBTW23 from iHome. This user guide will
get you up and running quickly and provide helpful hints to
maximize enjoyment. For more information about this and other
iHome products, please visit www.ihome.com
GETTING STARTED
This unit ships with the following items. Please check to see that all
items are present.
1 iBTW23 speaker system
2 100-240V Universal AC power adaptor
1 2
1
FEATURES & FUNCTIONS
Top panel
Wireless Qi Charging
Power On/Off
Button
Volume Control
Buttons
Sleep Button
Clock Button
Back panel
Display
Wireless charging
Indicator
Bluetooth
Indicator
WAKE-TO Indicator
(Bluetooth/Tone)
Snooze/Dimmer Button
DC Jack
USB Charging Port
PM Indicator
Volume/Alarm clock Indicator
Time Display
Alarm Buttons
Play/Pause Button
+/– Settings Buttons
Bluetooth Button
Voice Control/
Speakerphone Button
Alarm
Indicator
Low Backup
Battery Indicator
Sleep Timer Indicator
2
CONNECTING TO AC POWER
This unit operates on AC power
using the included 100V-240V
universal AC adaptor.
RESET
RESET
TEST
TEST
Place unit on a stable surface. Plug
the power adaptor into the DC jack
on back of the unit and the other
end into a working wall socket. You
can now charge your iPhone or
iPod.
BACKUP BATTERY
The iBTW23 ships with a CR2450 battery installed for backup to provide
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
alarm time settings will be temporarily maintained. Otherwise, you must reset
the time and alarm settings.
Note: The Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps on the next page.
3
BACKUP BATTERY (CONTINUED)
1. Please make sure the AC adaptor is connected. Otherwise all settings
may be lost during battery replacement.
2. Use a Phillips screwdriver to open the backup battery compartment
door located on the bottom of the unit.
3. Remove the exhausted battery. Insert a
new CR2450 battery by easing it under the
tabs in the battery well and pressing down.
Make sure the side marked + is facing up.
4. Close the battery compartment door and
tighten the battery door screw.
Note: Make sure you dispose of battery
properly (see your local regulations).
WARNING: Lithium batteries can explode or cause burns if disassembled,
shorted, recharged, exposed to water, fire, or high temperatures. Do not
place loose batteries in a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with hazardous or
combustible materials. Store in cool, dry, ventilated area. Follow applicable
laws and regulations for transport and disposal.
DST switch
4
Loading...