SDI Technologies IBT80 User Manual
Model: iBT76
Color Changing Rechargeable
Bluetooth Speaker
with Speakerphone
CHARGE
BEFORE
USE
instruction manual
iBT76
Introduction
Thank you for purchasing the iHome iBT76. This product is designed to
provide high quality wireless sound for your iPad, iPhone, iPod, computer,
PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit.
Please read it carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials can damage
the surface of the unit.
1
What’s Included
• iBT76 speaker
• Combination micro USB to USB charging cable/audio in cable
• Carry strap
iBT76
iBT76
micro USB to USB cable/audio cable
Carry strap
Combination
2
Meet Your iBT76
iBT76
Top
Carry Strap
Channel
Bluetooth/
Speakerphone
Button
Color Mode Button
(press and hold for
Battery Review)
Charging/Bluetooth
Status Indicator
Light
Bottom
Back
Charging/
Aux-in
USB port
Front
Carry Strap
Channel
(lantern mode)
Power On/O
Switch
Lower/Raise Volume
Buttons
Microphone
3
iBT76
Getting Started: Carry Strap
The iBT76 has two channels to attach the
included carry strap, one on the bottom to hang
the unit like a lantern, and one on the lower back
of the unit. To attach the carry strap, form a small
loop in one end of the carry strap. Insert this loop
through the desired channel, then pull the
loop back through the larger loop formed in the
carry strap to tighten.
Charging the Unit
CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING
1. Connect the micro USB plug on the included combination cable to the
micro USB Charging/Aux-in USB Port on the side of the unit.
2. Connect the standard USB plug end of the cable to a power USB port
on a computer, a USB AC adaptor or other USB charging device. For
first time use, charge unit for about 4 hours. The status indicator LED
on top of the unit turns solid red while charging and turns o once unit
is fully charged.
Charge via computer USB port, USB AC adaptor or other powered USB port
Computer
connected to
working outlet
USB AC adaptor
(not included)
iHome iBT76 USB port
Computer USB port
iHome iBT76 USB port
OR
USB AC adaptor
connected to working outlet
4
Loading...