SDI Technologies IBT751 User Manual

iBT751 QSG (English) Size: 420 x 160 mm (folded: 140 x 160 mm)

Color: print Black and PMS 7467C (2C + 1C) in white card

Material: 260gsm Art Card

Folded style

QUICK START GUIDE

Dec 7, 2017

Nov 28, 2017

QUICK START GUIDE

In the Box

Lower/Raise

Volume Buttons

ABOUT 5 HOURS

BLUETOOTH: PAIRING & PLAYING

Pairing the First Time

» iBT751 speaker

Play/Pause

Button

Action Button

CHARGE UNIT

BEFORE USE

FRONT

Voice Command/

Talk/End Button

iHome iBT751

» USB Charging cable

FRONT

Rear Projection

Button

Color Mode

Button

When speaker is ON and not charging, press Power Button to hear battery level announcement.

Rechargeable Bluetooth Color Changing Speaker

Model: iBT751

BACK

Power

Button

USB in

Charging Port

Charge via USB AC adapter or other powered USB port

Manual Pairing

Bluetooth Button

Aux-in Jack

(not included)

iHome iBT751

inside page inside page

USING SPEAKERPHONE

Answer Call

» The speaker must be on and connected with a paired Bluetooth device to recieve calls. » Press the Voice Command/Talk/End Button to answer incoming call. Press and hold to

end/decline call.

AUX-IN

» To play aux audio, connect a standard audio cable (not included) to the headphone jack

of your audio device and connect the other end to the aux-in jack on iBT751.

» Use controls on your device to listen to audio. » Make sure Bluetooth audio is paused: you will not hear Aux audio while Bluetooth audio

is playing or a call is in progress.

COLOR CHANGING MODE

PULSE TO MUSIC

» Press and hold the Power Button to power on the iBT751. » Press the Color Mode Button as needed to cycle through the above modes.

FAST FADEEQ MODE

REAR PROJECTION MODE

End/Decline Call

SLOW FADE OFF

VOICE COMMAND MODE

» Press the Voice Command/Talk/End Button to cycle through the above modes. » Press and hold the Voice Command/Talk/End Button for 2 seconds to access voice.

iHOME ENHANCE APP

» This unit is compatible with the iHome Enhance App. Download it from the Apple App

Store or from Google Play and link your device (select “iHome iBT751 app” on Bluetooth menu after tapping Setup Device from the app’s menu). You can then make custom color adjustments, set alarms and more.

» Press the Action Button to access functions programmed in the iHome Enhance app.

» Make your Bluetooth device “discoverable” » Press and hold the Power Button to turn on speaker. The ﬁrst time the unit is powered on

it will enter auto-pairing mode.

» Select “iHome iBT751” on your device’s Bluetooth menu to complete pairing. » To manually pair, power on speaker then press and hold Bluetooth Button for 2 seconds. » Press Play/Pause Button to play or pause Bluetooth audio. Press x2 to skip to next track.

Press x3 to return to start of current track or go to previous track

» To reset Bluetooth, press and hold Bluetooth Button for 10 seconds.

BACK

FCC Information

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf. l'appareil peut être utilisé dans des conditions d'exposition portatif sans restriction.

Model: iBT751

FCC ID:EMOIBT751

IC:986B-IBT751

PULSE TO MUSIC

BREATHE MODE FAST BREATHE

OFF

» Press and hold the Power Button to power on the iBT751. » Press the Rear Projection Button as needed to cycle through the above modes.

For full warranty and full instructions

visit: www.ihome.com/support

Internal Rechargeable Lithium-ion Battery

This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792.

WARNING/DISPOSAL OF UNIT

Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device.

To dispose of the unit, follow the instructions below:

• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.

• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.

• Many electronics retailers now recycle batteries and other electronic components at no charge.

GENERAL BATTERY PRECAUTIONS

• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances.

• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35°C (41° - 95° Fahrenheit).

• Never expose a battery to any liquid.

• Never expose a battery to excessive heat such as direct sunlight or ﬁre. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.

• Always keep batteries out of the reach of infants and small children.

For full waranty and full instructions

visit: www.ihome.com/support

iBT751-171207-A

Dec 07, 2017

Printed in China