SDI Technologies IBT62 User Manual

iBT62 QSG Size: 120 x 100 (mm) Dec 6, 2016 material: 350gsm2 art card, 2C + 1C
PMS7467C
FRONT
Rechargeable Mini Speaker
Model: iBT62
QUICK START GUIDE
Bluetooth: Pairing & Playing
Bluetooth mode
» Slide the O/On Switch on the speaker to the
on position
Pairing the First Time
Pairing the First Time
Manual Pairing
-OR-
» The first time the
unit is powered on it will enter auto-pairing mode
» Select “iHome iBT62” on your device’s Bluetooth
menu to complete pairing
» Press the Play/Pause Button
to play/pause music
Speakerphone
» The speaker must be on and connected with
a paired Bluetooth device to recieve calls
» Press the End/Answer Call Button
to answer call
» Press the End/Answer Call Button
again to end call
Contact Us: 1• 800•288 •2792
» Power on speaker » Press and hold the
Bluetooth Pairing Button for 2 seconds
For warranty and full instructions visit: www.ihome.com/support
Rechargeable Mini Speaker
QUICK START GUIDE
In the Box
» Connect the
micro-USB plug on the included charging cable to the USB Charging jack on the speaker.
» Connect the larger
USB plug to a powered USB port such as that on a computer or a USB AC adapter.
» iBT62 speaker » charging cable
USB AC adaptor connected to working outlet
CHARGE UNIT BEFORE USE - ABOUT 2 HOURS
USB AC adaptor (not included)
Status indicator
Solid red = charging Flashing red = low battery Flashing blue = pairing Red LED o = fully charged
Color Changing Modes
» Press the color mode button to
cycle through modes
FAS T ONE COLORSLOW OFF
Contact Us: 1• 800•288 •2792
For warranty and full instructions visit: www.ihome.com/support
Model: iBT62
BACK
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
FCC ID: EMOIBT62
IC: 986B-IBT62
Internal Rechargeable Lithium-ion Battery
This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
iBT62-161116-A Printed in China
11/16/2016
Loading...