SDI Technologies IBT56 User Manual

Model: iBT56 (Front) AUX-IN IB (English) Size: 324Wmm x 200Hmm Color: Print in Black color Date:Dec 03, 2015

iHome

Internal Rechargeable Lithium-ion Battery

This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.

WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. If the battery has died and you do

not want us to replace your battery, you should follow the disposal instructions below:

• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.

• Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices.

• Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so.

CAUTION The battery used in this device may present a risk of fire, explosion or chemical burn if

mistreated

• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance.

• Always confirm that the temperature is 5°C 35° C (41° - 95° Fahrenheit) before you charge the battery.

• Leakage or deterioration of the battery may occur if this warning is not heeded.

• Never expose the battery to any liquid.

• Never expose the battery to excessive heat such as direct sunlight or fire.Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered.

• Always keep the battery out of the reach of infants and small children.

Limited 1 Year Warranty Information

Home Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.

If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping instructions.

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

iBT56-112715-A Printed in China

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture – The unit should not be used near water. For example: near a bathtub,

2. Ventilation – The unit should be situated so that its location or position does not interfere with its

3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves

4. Power Sources – The unit should be connected to a power supply only of the type described in

5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to

6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of

7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not

product.

8. Attachments – Do not use attachments not recommended by the product manufacturer.

9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect

10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles

11. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a

13. Servicing – The user should not attempt to service the unit beyond those methods described in

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents

A Consumer Guide to Product Safety

IMPORTANT SAFETY INSTRUCTIONS

washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

or other appliances (including amplifiers) that produce heat.

the operating instructions or as marked on the appliance.

be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.

this manual for cleaning instructions.

spilled into any openings or vents located on the

the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.

as this can result in a risk of fire or electric shock.

month or longer, charge battery fully before storing.

the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.

Maintenance

protective material should be placed between it and the furniture.

such as thinner or similar materials can damage the surface of the unit.

Model: iBT56

Rechargeable

Bluetooth

Speaker

with

Speakerphone

CHARGE

BEFORE

USE

Questions? Visit www.ihome.com

FCC ID: EMOIBT56

FCC Information FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

QDID: B020770

IMPORTANT

Read before proceeding If you have any question regarding the operation or use of this product, please visit

www.ihome.com to view answers to frequently asked questions. To learn more about this and other iHome products, please visit us online at www.ihome.com

IC: 986B-IBT56

charging cable included

Status LED

Microphone

Computer connected to working outlet

FRONT VIEW

CHARGING THE SPEAKER

Computer USB port

CHARGE BEFORE USE

Charging LED

Power Button

Phone Button

TOP VIEW

–/+ Volume

USB AC adaptor connected to working outlet

Buttons

USB AC adaptor (not included)

Bluetooth

Pairing

Button

BACK VIEW

reset

Reset

reset

USB Charging Jack

Charging the iBT56

‘The iBT56 is powered by a rechargeable battery in the speaker.

MAKE SURE TO CHARGE SPEAKER BEFORE USE

• Connect the micro-USB plug on the included charging cable to the USB Charging Jack on the speaker.

• Connect the larger USB plug to a powered USB port, such as that on a computer or USB AC adapter. The computer or USB AC adapter should be connected to a wall outlet when speaker is charging. The Charging LED on the speaker will turn solid red while charging and turn off when fully charged.

• If the LED flashes red, or you notice sound distortion at higher volumes, or there is no sound at all, it's time to recharge the battery.

Using Bluetooth with the iBT56

1. Press and hold the Power Button on the speaker to turn the speaker on. The first time the unit is powered on, it will automatically enter pairing mode (see step 3). Otherwise, go to step 2.

2. Press and hold the Bluetooth Pairing Button for 2 seconds. The Status LED will flash blue quickly and a tone will sound as the speaker attempts to pair with a Bluetooth device.

3. Place your audio device in Bluetooth mode (look in the device’s Settings or Tools menu) and make it “discoverable”. “iHome iBT56” should appear on your device’s Bluetooth menu. Select it to connect. If your device asks for a passcode, enter ‘1234’.

• Once paired, the LED will glow solid blue and a confirmation tone will sound. You can then stream audio to the speaker. If pairing is not successful, turn the power off on the speaker and repeat steps 1-3. To reset/clear Bluetooth, press and hold the Bluetooth Button for 10 seconds.

4. To listen to Bluetooth audio, make sure the speaker is on. Press the – /+ Buttons to control volume. Control track navigation and menus from your device.

Press and hold the Power Button to turn off the speaker after listening.

Press and hold

to turn speaker ON

• Press and hold to pair

• Use controls on device to play and pause audio

BLUETOOTH MODE

2 Sec

SPEAKERPHONE MODE

Using the iBT56 Speakerphone Mode

Press to answer and switch calls Press and hold to ignore/end calls

NOTE: To save battery power, the unit will power off automatically after

15 minutes with no audio.

The speaker must be on and connected to a paired Bluetooth phone to receive

calls. When a call comes in, any playing audio is paused, the Status LED will flash blue 2X and the ringtone associated with the caller may sound, depending on Bluetooth device.

• Press the Phone Button to answer a call and switch between calls.

Press and hold to ignore a call or end a call.

RESETTING THE SPEAKER

If the speaker does not respond properly (is “frozen” or “locked up”), turn the speaker ON and insert the end of a paperclip or similar into the Reset port on the back of the unit for a few seconds. A long beep should confirm reset was successful.