Using the
iBT36
IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION
For proper waterproof operation, make sure the waterproof cover on the left side of the unit is
completely flush with the unit by pressing along the entire edge of the cover until it is completely and
securely in place.
water
tight
• The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter
(3 feet). It will typically withstand rain, snow and being submersed in shallow water. Longer duration or
deeper immersion that exceeds the tested limits may cause product failure and void the warranty.
• DO NOT immerse the unit in water for extended periods.
• DO NOT immerse the unit in water deeper than 1 meter (about 3 feet).
• Make sure cover and surrounding surfaces are completely dry before opening cover to prevent moisture
from damaging the internal electronics.
• Keep rubber cover free of dirt, sand, or other objects that can interfere with proper sealing. If for any
reason the waterproof cover is not making a tight waterproof seal water may enter the unit.
• Rinse with tap water after immersion in salt water or swimming pool.
• DO NOT clean unit with oily soaps or use chemicals or solvents. Clean with damp cloth.
not
water
tight
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be
placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar
materials can damage the surface of the unit. Rinse unit with tap water and wipe dry after submersion in salt water or swimming pool.
iBT36
Long-term Storage of Your Product
• Store in a cool, dry place.
• Unit should be charged before storing.
• If stored for a long period of time, unit may be unresponsive until charged for a number of hours (depending on discharge level)
• Do not store for more than a year without charging as this can permanently harm the battery.
• After long term storage, if unit is unresponsive after charging, RESET unit while connected to AC and recharge the unit.
Internal Rechargeable Lithium-ion Battery
This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect
your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service
at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device.
To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge.
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic
substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where
excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
iBT36
Table of Contents
Included / Meet Your iBT36............................................................................................. 1-2
Charging the iBT36/Quick Battery Status Check/ECO Battery Mode
Turning the Unit ON and OFF.............................................................................................4
Using Bluetooth: Pairing Your Device .................................................................................... 5
Pairing with a Different Device/Playing Audio Via Bluetooth .....................................................6
Using the Speakerphone feature..........................................................................................7
Playing Audio Via Aux In ...................................................................................................7
Chagring Devices via USB Out Port .....................................................................................8
FCC information...............................................................................................................9
Consumer Product Safety Guide................................................................................... 10-11
Troubleshooting ..............................................................................................................12
Warranty......................................................................................................................13
.......................................3
Included
iBT36
1. iBT36 Speaker
2. USB charging cable
3. Bottle opener/carabiner clip
To remove carabiner clip:
1. Hold clip sideways to unit.
2. Press clip hinge post inwards and
slide strap loop off of hinge post.
2
1
2
1
1
3
Meet Your iBT36
Volume Down Button
iBT36
Top view
Volume Up Button
Power On/Off Button
Reverse/End Call Button
Side view
Waterproof Door Cover
Play/Pause/Pairing Button
Forward/Answer Call Button
Front view
Charging LED Indicator
Power/Bluetooth
Aux-in Jack
Reset
RESET
AUX-IN
USB DC 5V, 1A
POWER
IN
ON
ECO
OFF
RESET
USB Out Port
(to charge devices)
AUX-IN
USB DC 5V, 1A
ECO Battery Mode
On/Off Switch
PO
IN
W
ER
ECO
ON OFF
USB POWER IN Port
(charges unit )
Status Indicator
Speakerphone Mic
2