iBN43 IB
Size: 153mm x 120mm
Printing color: Black
Dec. 22, 14.
P1
iBN43
NFC Bluetooth Wireless
FM Clock Radio
with USB Charging
instruction manual
Questions? Contact Customer Service at 1-800-288-2792
P2
Introduction
Thank you for purchasing the iHome iBN43. This product is designed to provide high quality wireless
sound for your iPad, iPhone, iPod, computer, or other Bluetooth audio device.
The dual alarms on this iHome clock radio can be set and used independently, so you can program each
alarm to wake you up to a paired Bluetooth device, 4 separate alarm tones, the FM stereo radio, or a
buzzer alarm. You may set each alarm for weekday, weekend, or everyday operation, and even adjust
the alarm volume separately from your normal listening volume. If the power is out at your selected wake
up time,the SureAlarm battery backup system will activate the electronic buzzer alarm to get you up on
time even
This instruction booklet explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.
This unit features NFC (near field communication) technology which allows you to
wirelessly connect your NFC–enabled device to instantly ‘pair and play’. See your
device’s user manual for details on how to interact with NFC devices.
If your Bluetooth device does not support NFC, you can pair it manually with this
unit.
iBN43
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.
P4
Table of Contents
Meet Your iBN43.......................................................................................................... 1-3
The Display/Setting Up the Unit ..........................................................................................4
Setting the Clock/ FM Radio..............................................................................................5
Setting and Using FM Presets..............................................................................................6
Setting and Using the Alarms ........................................................................................... 7-8
Previewing and Turning Alarm Off/Setting Gentle Wake Timer ................................................8
Snooze/Dimmer Button/Sleep and Nap Modes ..................................................................9
Using Bluetooth: Pairing & Playing Your Device Using NFC ....................................................10
Pairing Your Device Manually............................................................ ...............................11
Playing Audio Via Bluetooth/Using the Speakerphone...........................................................12
Playing Audio Via Aux-in/Charging Devices via USB Port ..................................................... 13
Using FM Radio in Other Countries....................................................................................14
Replacing and Installing Clock Backup Batteries ..................................................................15
Remove the pull tab
before initial use to
activate the SureAlarm
battery backup system.
Pull Tab
DC Jack
USB Charging Port
DC 9V 3A
AA x 2
iBN43
Aux-in Jack
FM Antenna
Backup Battery
Compartment
3
P8
The Display
PM/AM
Indicators
Date, Alarm time, Mode Indicator: Radio, Bluetooth, Aux-in
Setting Up the Unit
Connect the included AC adaptor to
the DC jack located on the back of
the unit and connect the other end
to a working wall outlet.
Time Display
Using the
RESET
RESET
TEST
TEST
iBN43
Alarm Active Indicator
Bluetooth Indicator
Low Backup
Battery Indicator
DC 9V 3A
4
P9
Using the
iBN43
Setting the Clock
1. Press and hold the Equalizer/Time Set Button for 2 seconds until the clock display flashes and unit
beeps.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the
display. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time
display, press the Alarm 1 or Alarm 2 Button during time setting.
3. Press the Equalizer/Time Set Button again to confirm the time. The year will flash. Press the – or +
Buttons to adjust the display to the current year (hold for rapid setting).
4. Press the Equalizer/Time Set Button to confirm the year. The date will flash. Press the – or + Buttons
to adjust the display to the current month and date (hold for rapid setting).
5. Press the Equalizer/Time Set Button to confirm the time and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
FM Radio
1. Press and release the Mode Button as needed until the current FM radio station appears on the
display.
2. Press the – or + Buttons to tune the radio to the desired station (hold for 2 seconds to search for
the next clear station). Extend the FM antenna for best reception.
(Continued on next page)
5
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.