SDI Technologies IBN350 User Manual

Model: iBN350

NFC Bluetooth Stereo Dual

Alarm Clock with Dual

Wireless USB Charging

QUESTIONS? Visit www.ihome.com

WELCOME

Thank you for choosing the iBN350 from iHome. This user guide will

get you up and running quickly and provide helpful hints to

maximize enjoyment. For more information about this and other

iHome products, please visit www.ihome.com

GETTING STARTED

This unit ships with the following items. Please check to see that all

items are present.

1 iBN350 speaker system

2 100-240V Universal AC power adaptor

1 2

FEATURES & FUNCTIONS

Top panel

Power On/O

Button

Volume Control Buttons

Alarm 1/Alarm 2 Buttons

Back panel

DC jack

Display

AM Indicator

PM Indicator

Low Backup Battery Indicator

Sleep Mode Indicator

Wireless Charging

Indicator

Wireless charging pad NFC charging

(on right side of unit)

Talk/End Call Button

Mode Button

Play/Pause Button

Sleep Button

DC 9V 3A

USB

charging

port

Snooze/Dimmer

Button

Clock

DST

Button

Switch

Bluetooth Pairing Button

+/– Settings

Aux-in jack

Time Display

Alarm

Alarm Time/Date Display

Wake-To/Mode Indicators (Tone/BT/(Bluetooth)Aux)

Indicators

Bluetooth Indicator

area

Buttons

CONNECTING AC ADAPTER

This unit operates on AC power

using the included 100V-240V

RESET

TEST

DC 9V 3A

universal AC adaptor. Place unit on

a stable surface. Plug the power

adaptor into the DC jack on back

of the unit and the other end into a

working wall socket. The Power

Button will glow red.

verify adaptor type

BACKUP BATTERY

The iBN350 ships with a CR2450 battery installed for backup to provide

continuous alarm operation and clock settings in the event of a power failure.

Remove the pull tab from the battery compartment on the bottom of the unit

before use. If a power failure occurs or the AC cord is accidentally

disconnected, the display backlight will not remain lit, but current time and

alarm time settings will be temporarily maintained. Otherwise, you must reset

the time and alarm settings.

Note: The Battery Low icon is located at the lower left side of the clock

display. When the backup battery is low and needs to be replaced, the

Battery Low icon will ﬂash. To replace, follow steps on next page.

BACKUP BATTERY (CONTINUED)

1. Please make sure the AC adaptor is connected. Otherwise all settings

may be lost during battery replacement.

2. Use a Phillips screwdriver to open the backup battery compartment

door located on the bottom of the unit.

3. Remove the exhausted battery. Insert

a new CR2450 battery by easing it

under the tabs in the battery well and

pressing down. Make sure the side

marked + is facing up.

4. Close the battery compartment door and tighten the battery door screw.

Note: Make sure you dispose of battery properly (see your local

regulations).

show iBN350

battery compartment

WARNING: Lithium batteries can explode or cause burns if disassembled,

shorted, recharged, exposed to water, ﬁre, or high temperatures.

Do not place loose batteries in a pocket, purse, or other container

containing metal objects, mix with used or other battery types, or

store with hazardous or combustible materials. Store in cool, dry,

ventilated area. Follow applicable laws and regulations for

transport and disposal.

+ 11 hidden pages