SDI Technologies HDL50A User Manual

HDL50A Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost)

HDL50A

Sta Quick Start Guide

Included

• HDL50A system

• 100V-240V universal AC adaptor

Set Up

Remove thumbscrew and remove back cover to access sta controls

outlet

Connect AC adaptor to DC jack/wall outlet

Remove pull tab from Backup Battery Compartment located on bottom of the

unit. When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to AC power when replacing battery or you will lose settings.

12V 3.5A

DC 12V 3.5A

time set time zonetime sync

DST

-1 +1 auto

Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation.

Setting Clock Using Time Sync

a) Connect a Lightning-compatible

iPhone to the Dock

b) connect any iPhone to the USB port using the USB cable that came with the iPhone

Press the Time Sync Button on the back of the unit to instantly set the time on the HDL50A.

time sync

NOTE: For the fastest, most accurate time setting,

set the clock using Time Sync with a) a docked iPhone OR

b) an iPhone connected to the USB port iPhone time is always current because it pings oﬀ cell towers;

iPad or iPod are only accurate to the last time they were

synced to a computer.

Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails,

set the clock manually.

DST

-1 +1 auto

HDL50A Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost)

Manual Clock Setting

NOTE: Time display can be set to 12 or 24 hours at any time during clock setting

To toggle time display between 12 or 24 hours, press the alarm set button during clock setting

Clock Setting

Press and hold the Time Set Button to enter clock setting mode

Press the or button to set time

alarm

set

time set

2 SECS

WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal.

Press the or button to set year

Press the Time Set Button

time set

Press the or button to set date

FM Radio

Press function Button as needed to cycle to FM mode

Press the or button to tune to a desired station (hold to search for next clear station)

function

iPod/USB/radio

Bluetooth/line-in

FM Presets

Press FM presets Button to cycle to the preset (P1- P6) you wish to set

presets

Daylight Saving Time

The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November.

Press the or button to select station to preset

Press FM presets Button to conrm

Follow steps above to set all 6 FM presets

Extend FM antenna for best reception

Once sta has completed setup, replace security cover on back of unit and tighten thumbscrew.

presets

Beep

Press the Time Set Button

time set

Press the Time Set Button to conrm Clock Setting

time set

Beep

Press and hold FM presets Button to conrm preset number

presets

2 SECS

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit.