Screeneo Innovation SA
Remote Control user’s manual
一、 Application equipment:
Home Projector
二、 Hardware Part
1、MCU: RTL8762AG
2、Battery: 2 pcs AAA batteries
3、Indication light: No
4、IR LED: Yes
三、 Compatable operating system
1、Android 4.4+ (or Higher)
2、Windows RT 8.1 (or Higher)
3、Windows 8 (or Higher)
四、 Main function
1. Keypad function
Keypad function emit IR code only under condition of IR mode.
OK button emits BT code but other buttons emit IR code under condition of
BT/Air mouse mode.
2. Air mouse function
When press on air mouse button then air mouse function switch on, press on
air mouse button again then air mouse function switch off, at the same time
button emit IR code. Under condition of air mouse function switch on the
“OK”button deem as left button of mouse.If the remote no move for 60 seconds
then mouse function switch off then remote control standby to save energy of
battery.
五、 Code pairing
1. PPA 5750 Air Mouse
Firstly artifically pair code, after blue tooth pairing succeed then RC
can pair code automatically.
BT remote name: PPA 5750 Air Mouse
2. Pairing keys
Pairing buttons: Press on “FOCUS+” and “FOCUS-” keys for more than 3s
六、Switch
1. (Power ON/OFF -- button “POWER”)
公司网址:www.xmhello.com 电话:0592-5657230
Screeneo Innovation SA
This means the remote wakes up when pressing the “Power” button
2. (Bluetooth/Air mouse Switch --- controlled by air mouse button)
七、 Battery energy detection
The remote detect the energy of battery, projector server read voltage of remote
control via connecting blue tooth. When battery energy is less than 30% the
information will be shown on screen of projector to remind user to change battery
八、Key code:(IR keycode、Protocol NEC 0x8019)
公司网址:www.xmhello.com 电话:0592-5657230