WWW.SCOTT-SPORTS.COM
WWW.SCOTT-SPORTS. COM
SCOTT Spor ts SA
Route du Crochet 17, CH–1762 Givisiez
Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00
Email: postmaster@scott-sports.com
All rights r eserved ©201 5 SCOTT Sports S A
Distribution:
SSG (Europ e) Distribution Ce nter SA, P.E.D. Zon e C1, Rue du Ki ell 60, 6790 Aub ange, Belgi um
v5.1/030 82015
SCOTT SCALE
USER MANUAL 2016
WWW.SCOT T-SPORTS.CO M
ENGLISHENGLISH
Scale Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Geometry/Technical Data Scale . . . . . . . . . . . . . . . . . . . . . . . . . 04
BB Standards/FD Mounting Details . . . . . . . . . . . . . . . . . . . . . . . 06
Chainguide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Headset Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07
BB Cable Guide/Cable Routing . . . . . . . . . . . . . . . . . . . . . . . . . 08
Seattube Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Replaceable Rear Derailleur Hanger . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Disc Brake Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front Fork Set- Up/Change of Front Fork . . . . . . . . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
•
CONTENTS
The Scale b ikes should be adjusted exactly to the current rider to
maximize safety, comfort and fun while riding.
All adjustm ents should be done at your local SC OTT dealer or by
following the instructions in this manual.
Please contact your authorized SCOT T dea ler if you have any
doubts or require further information in order to avoid technical
problems or a ny harm .
03 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 02
SCALE 700
S M L XL
A HEAD TUBE ANGLE 69.0 ° 69.0 ° 69.0 ° 69.0 °
B HEA D TUBE LENGTH 100.0 mm 3.9 in 100.0 mm 3 .9 in 115.0 mm 4 .5 in 125 .0 mm 4.9 in
C TOP TUBE HORIZONTAL 575.0 mm 22.6 in 600.0 mm 23.6 in 62 5.0 mm 24. 6 in 650.0 mm 25.6 in
D STANDOVER HEIGHT 728.9 mm 28.7 in 758 .0 mm 29.8 i n 786. 8 mm 3 1.0 in 819.7 mm 32.3 in
E BB O FFSET -44.0 m m -1.7 in -44 .0 mm -1.7 in -4 4.0 mm -1.7 in - 44.0 mm -1.7 i n
F BB HEIGHT 307. 5 mm 12.1 in 307.5 mm 12.1 in 3 07.5 m m 12. 1 in 307. 5 mm 12.1 in
G WHEEL BASE 1’075.2 mm 42. 3 in 1’100.2 mm 43.3 in 1’ 126.3 mm 44.3 in 1’1 52.0 mm 45.4 in
H BB CENT ER TO TOPTUBE CENT ER 315. 8 mm 12.4 in 369.3 mm 14.5 in 409.3 mm 16.1 in 458. 2 mm 1 8.0 in
I BB CENTER TO TOP O F SEATTUBE 390.0 mm 15. 4 in 440.0 mm 17.3 in 480.0 mm 18 .9 in 530.0 mm 20. 9 in
J SEAT ANG LE 73.0 ° 73. 0 ° 73.0 ° 73.0 °
K CH AIN STAY 427.0 m m 16.8 in 427.0 m m 16.8 in 427.0 mm 16.8 in 427. 0 mm 16.8 i n
L R EACH 398.1 mm 15.7 in 423 .1 mm 16.7 in 443.8 mm 17. 5 in 466.0 mm 18.3 in
M STACK 578.6 m m 22. 8 in 578 .6 mm 22 .8 in 592.6 mm 23.3 in 601.9 mm 23.7 in
N STEM LENGTH 70.0 mm 2.8 in 80.0 mm 3.1 in 90.0 mm 3 .5 in 100.0 mm 3.9 in
SCALE 900
S M L XL
A HEAD TUBE ANGLE 69.5 ° 69 .5 ° 69.5 ° 69. 5 °
B HEA D TUBE LENGTH 105. 0 mm 4.1 in 105.0 mm 4.1 i n 115 .0 mm 4.5 in 125.0 mm 4.9 i n
C TOP TUBE HORIZONTAL 580.0 mm 2 2.8 in 600.0 mm 23.6 in 620.0 mm 24. 4 in 640.0 mm 2 5.2 in
D STANDOVER HEIGHT 756.0 mm 29. 8 in 783. 0 mm 30.8 in 810.0 mm 31 .9 in 8 42.0 mm 33. 1 in
E BB O FFSET -60.0 mm -2.4 in - 60.0 mm -2. 4 in -60.0 mm -2.4 in -60.0 mm -2.4 in
F BB HEIGHT 310.0 mm 12 .2 in 310.0 mm 12. 2 in 310.0 mm 12.2 in 310.0 mm 12.2 in
G WHEEL BASE 1’079.0 m m 42.5 in 1’0 96.8 mm 43. 2 in 1 ’11 7.0 mm 44.0 i n 1 ’13 7.9 m m 44.8 in
H BB CENT ER TO TOPTUBE CENT ER 32 9.0 mm 13.0 in 37 5.0 mm 14. 8 in 415. 0 mm 16. 3 in 46 5.0 mm 18.3 i n
I BB CENTER TO TOP O F SEATTUBE 390.0 mm 15. 4 in 440.0 mm 17. 3 in 480.0 mm 18.9 i n 530.0 mm 20.9 in
J SEAT ANG LE 72.5 ° 72.5 ° 72.5 ° 72 .5 °
K CH AIN STAY 438.0 mm 17. 2 in 438.0 m m 17. 2 in 4 38.0 mm 1 7.2 i n 438 .0 mm 17. 2 in
L R EACH 385.0 mm 1 5.2 in 405.0 m m 15. 9 in 42 2.0 mm 16. 6 in 439 .0 mm 17. 3 in
M STACK 61 8.0 mm 24.3 in 6 18.0 mm 24. 3 in 628.0 m m 24.7 in 63 7.0 m m 25 .1 in
N STEM LENGTH 70.0 mm 2.8 in 80.0 mm 3.1 in 90.0 mm 3 .5 in 100.0 mm 3.9 in
SCALE PLUS
S M L XL
A HEAD TUBE ANGLE 67. 6 ° 67.6 ° 67. 6 ° 67.6 °
B HEA D TUBE LENGTH 100.0 mm 3.9 in 105.0 mm 4.1 in 115. 0 mm 4.5 in 125.0 mm 4.9 in
C TOP TUBE HORIZONTAL 57 7.0 m m 2 2.7 in 602 .0 mm 23.7 i n 6 27.0 m m 24.7 in 652.0 mm 25 .7 in
D STANDOVER HEIGHT 780.0 mm 30.7 in 80 6.0 mm 31.7 in 829.0 mm 32.6 in 8 57.0 m m 33.7 in
E BB O FFSET -50.0 mm -2.0 in -50.0 mm -2.0 in -5 0.0 mm -2.0 in -50.0 mm -2.0 in
F BB HEIGHT 315 .0 mm 12 .4 in 3 15.0 mm 12.4 in 3 15.0 mm 12.4 in 31 5.0 mm 12.4 in
G WHEEL BASE 1’10 8.0 mm 43 .6 in 1 ’133.4 mm 44.6 i n 1’ 159.3 mm 45.6 in 1’185.2 mm 46 .7 in
H BB CENT ER TO TOPTUBE CENT ER 328 .0 mm 12.9 i n 38 3.0 mm 15.1 in 42 5.0 mm 16.7 i n 477. 0 mm 18. 8 in
I BB CENTER TO TOP O F SEATTUBE 390.0 mm 15. 4 in 440.0 mm 17. 3 in 480.0 mm 18.9 i n 530.0 mm 20.9 in
J SEAT ANG LE 72.8 ° 72.8 ° 72 .8 ° 72. 8 °
K CH AIN STAY 439.0 mm 17. 3 in 439.0 mm 17. 3 in 439.0 mm 17. 3 in 439.0 mm 17. 3 in
L R EACH 389.0 mm 15. 3 in 412.0 mm 16. 2 in 43 5.0 mm 17. 1 in 457. 0 mm 1 8.0 in
M STACK 607. 0 mm 23. 9 in 612 .0 mm 24.1 in 62 1.0 mm 24.4 in 6 31.0 mm 24. 8 in
N STEM LENGTH 50.0 mm 2.0 in 60.0 mm 2.4 in 70.0 mm 2.8 i n 80.0 mm 3.1 in
ENGLISHENGLISH
•
SCALE CONCEPT
Scale is the re sult of research and developme nt based on the feedback f rom the SCOTTODLO Racing Team searching for one of the lightest cross country racing frames in
the market.
SCOT T’s focus was not only on creating a lightweight f rame, but o ne that was also a stiff and
easy to handle racing fram e.
Seatpost
diameter
Scale 70 0 / Plus: 31 .6mm (27.5”),
Scale9 00: 34. 9mm (29”)
Seattube clamp Scale 700 / P lus: 34. 9mm (27.5”),
Scale9 00: 38 .2mm (29”)
Headtube
diameter
1 1/8” /1 .5”, tapered, cup s semi-integrated ,
50- 61mm cup O D
Fork travel Scale 70 0 / 900: 10 0mm, Scale Plu s:
120mm
Technical fork
length
Scale 70 0: 487mm (27.5”), S cale900:
506mm (2 9”), Scale Plus: 5 20mm
BB housing PF BB 92
Rear Hub W idth Sc ale 700 / 900: IDS S L2 135-5/135 -12/142-
12mm, Sc ale Plus: Boost 14 8/12mm
Max tire widt h Scale 70 0 / 900: 57.5m m/2.25”, Scal e Plus:
74mm/2.9”
Chainring size Scal e 700 / 900: m in. 22T, max. 44T, Scale
Plus: Max 3 4T (single)
•
GEOMETRY/TECHNICAL DATA SCALE
•
GEOMETRY/TECHNICAL DATA SCALE
05 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 04
ENGLISHENGLISH
•
BB STANDARDS/FD MOUNTING DETAILS
Scale is available for PressFit 92 Cartridges (PF92).
PF BB 92 has a housing width of 92m m (Scale 700) or 89 .5mm plus a 2.5mm additional
washer (Scale 900, Scale Plus) with an inner diameter for the cartridges of 41mm.
•
HEADSET OPTIONS
Scale features a tapered h eadset and fork steerer sys tem to match with semi-integrated
headsets of the “50 -61 ”mm range.
The steerers of those forks are
tapered from 1.5” to 1 1 /8”.
This bigger diameter of the fork
steerer as well as on the frame
headtube helps to increase the
stiffne ss and handling of the bike .
Scale 700 (27.05”) FD
The front derailleur (FD) fixation for Scale 700 is a
direct mount system.
It is made for Shimano E-Type derailleurs or SRAM S 3
assembl y.
For Scale Pl us the FD fixation is E-Type with 3mm
outboard to match with rear hub boost standard.
In addition it h as an integrated chainguide assembled
on this fixation p late.
Scale 900 (29”) FD
The Front Derailleur (FD) clamp is with a n inner
diameter of 34.9mm , the cable routing on the fra me is
for “down route/pull - down swing ” models.
IMPORTANT!
Please note that th e maximum tightening torqu e on the FD cl amp is 5Nm/44in/lbs.
A higher t ighteni ng torque might cause damage to the FD camp and/or frame tube!
Please al so refer to t he related manual s of the manufacturer of the F D.
•
CHAINGUIDE
On some Scale 900 (29 ”) Carbon models you will find a chainguide system to support the
shifting performance when using 2 chainring cranksets.
3 different m ounting plates a re available to match the different sizes of th e outer chainrings
(39/42 /4 4T ).
Please note the max. tightening torque of 5Nm/44 in/lbs on the mounting screw of the pl ate.
07 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 06
ENGLISHENGLISH
Ritchey WCS C arbon Zero Tapered PF 50- 61mm 18mm UD PRD 13636
Ritchey PRO Taper ed PF 50- 61mm 12.9mm PRD 13 640
It is also possible to use forks with a standard 1 1/8 ” steerer tube when using a reducer
headset such as e.g.
Ritchey WCS C arbon Zero Tapered PF 50- 61mm 18mm U D for 1 1/18 " fork PRD 148 60
•
BB CABLE GUIDE/CABLE ROUTING
Scale features also an internal cable routing for front and rear derailleur.
A special BB Cable Guide was developed for Scale which is available as a spare part at the
SCOT T distribution with article number
for Scale 700
235285 Cableg uide BB Scale 700 2 014
and for Scale 900
219579 Cableguid e BB Scale
Please note that th ose 2 cableguides are not interchangeable between the frame s izes.
Please note that th e outer housin g of the FD and RD c ables will stop at the cable stop/port
on the front en d of the down tube.
If you want to replace the cables , please follow these steps:
1. Remove the clip-in B B Guide in th e BB housing
2. Push the inner cables f rom the front downward inside the downtube to the BB housing.
3. Pull them out of th e related holes (RD on right side, FD on left side) on the BB housing.
4. Push them through the related holes on the BB Guide and clip the BB Guide into the
BB housing
5. Follow the standard set up and assembly instr uctions of the shifting system manufac turer
for final ad justment of the shifting s ystem
09 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 08
ENGLISHENGLISH
•
SEATTUBE CLAMP
Please make sure to only use a seatclamp with an inner diameter of 34.9mm (Scale 700 /
Plus) or 38.2mm (Scale 900) and please note the maximum tightening torque on th e fixing
bolt of 5Nm/44 in/lbs
•
REPLACEABLE REAR DERAILLEUR HANGER
Scale uses the same replaceable rear derailleur hanger sys tem (called IDS SL 2) as SCOT T
Spark, G enius and G enius LT.
Depending on the different mode ls you’ll find following options:
1. 142mm axle with RWS 142/12
This is available via the SCOTT distribution with:
21 95 74 complete set of R WS 142/12
219577 right side rep laceabl e RD hange r
2. 135mm axle with RWS 135/5
This is available via the SCOTT distribution with:
219572 complete set of RW S 135/5
219575 right side re placeabl e RD hanger
If you want to use anoth er RWS standard SCOT T can also offer the following as after-market
parts for specific wheelsets via th e SCOT T distribution:
21 95 74 RWS 135/12 p arts set
219576 right sid e replacea ble RD hanger
•
REAR DISC BRAKE MOUNT
The rear disc brake on Scale is Postmount
(PM) Standa rd on the left chainstay and
optimized for 16 0mm/6” rotors, so the
calliper c an be mounted directly without
adapters on th e Postmount fixation.
Please note Sc ale is design ed for disc
rotors between 160mm/6” a nd 185m m/7”
(adapter needed from manufa cturer of the
brake) o nl y.
•
FRONT FORK SET-UP/CHANGE OF FRONT FORK
For the set up of the front fork plea se use the fork sp ecific manual attached to the bike.
We recommend using front forks with distance of
487mm/1 9.2” for Scale 70 0,
506mm /19.9” for Scale 900,
520mm/20.5” for Scale Plus
between mid of axle to top of crown, as this will not influence the geometry and alter
handling of th e bike.
11 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 10
ENGLISHENGLISH
•
WARRANTY
Model ...................................................................................
Yea r .....................................................................................
Size ......................................................................................
Frame Nr. ................................................................................
Shock Nr. ................................................................................
Date of purchase .........................................................................
•
WARRANTY
SCOT T bikes are made using the most innovative production and quality methods. They are
equippe d with best comp onents of well known part s suppliers.
Doing so SCOTT warrants its frames and swingarms for five years (subject to com pliance
with maintenan ce ranges, see below) and SC OTT fo rks (provided it is a fork of SCOT T) for
two years for defects in material and/or workman ship in case of purchase of completely
assembled bikes.
This warrant y of 5 years for the f rames shall only be granted in case once a yea r a
maintenance service has been effected accordin g to maintenance re quirement s as set forth
in this manual by an authorise d SCOT T dea le r.
The authorised SCOT T dealer shall confirm the effected annu al maintenan ce service by
stamp and signature.
In case such a n annual maintenance ser vice has not been effected the warranty of 5years
for the frame shall be reduced to 3 years.
Costs for maintenance and service have to be born by the owner of the SCOTT bike.
On Gambler, Voltage Fr and Volt-X the warranty period is limited to 2 years.
The warrant y period starts at the day of purchase. This warranty is limited to the first buyer,
what means th e first person who uses the bike and only with th e use it was made for.
Furtherm ore, this warra nty is limited to purchases via authorized SCOT T-dealers
The warrant y is solely gra nted in case of purchase of a completely assembled bike to the
explicit exclusion of p urchases of not co mpletely assembled bikes.
In case of a warranty claim the decision to repair or to replace the d efective par t is up to
SCOT T. Non defective parts will only be replace d at the guarantee’s own expense.
Fair wear and tear is not covered by the warranty.
A complete list of all parts of wear and tear can be found in the n ext chapter of this manual.
In addition , you will find at th e end of this manual a protocol for the handing over of the
bike which will remain in copy at the SCOTT dealer af ter acceptance and signature of the
cons um e r.
It is obligator y to show this protocol of ha nding over together with the defec tive part in ca se
of a warranty cl aim given that it provid es evidence of purchase. Oth erwise no warranty is
grante d.
In principl e, this warranty is granted worldwide. Clai ms must be made through an authorized
dealer, for information regarding the nearest dealer, write or call th is company or the national
SCOT T distributor.
Normal wea r, accident, neglect, abuse , improper a ssembly, improp er maintenance by other
than an autho rized dealer o r use of part s or devices not consistent with the use originally
intended for the bicycle as sold are not covered by this warranty.
Hereby SCOTT grants a voluntarily manufacturer’s warranty. Additional entitlements
according to natio nal warrant of m erchantability are reserved.
For warranty info on the Fox Nude shock please refer to the attach ed manual of Fox Nude .
13 |
2016 BIKE USE R MANUAL | SCALESCALE | 2016 BIKE USER MANUAL
| 12
Loading...