Scotsman EH330 Prodigy Plus Eclipse 1400, EH430 Prodigy Plus Eclipse 1400, EH430 Prodigy Plus Eclipse 1800 User Manual
Installation and User Manual for
Eclipse Cuber
Prodigy Plus D Series models EH330 D and
EH430 D, with ECC Condensing Unit ECC1200,
ECC1410, ECC1800
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Introduction:
This manual covers the assembly, installation, start up, operation and maintenance of the 1200, 1400 and
1800 remote low side cuber systems.
Contents
Conguration .................................................................. Page 2
Technical Specications ......................................................... Page 3
Cabinet Drawings, EH330 Ice Making Head .......................................... Page 4
Cabinet Drawings, EH430 Ice Making Head .......................................... Page 5
Cabinet Drawings, ECC Condensing Unit ............................................ Page 6
Pre-Installation Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Create the System .............................................................. Page 8
System Example ............................................................... Page 9
Place Remote System ........................................................... Page 10
Tubing ....................................................................... Page 11
Place Ice Making Head .......................................................... Page 12
Condensing Unit Electrical ....................................................... Page 13
Water and Drain ............................................................... Page 14
Connect Refrigeration ........................................................... Page 15
Complete the Installation ......................................................... Page 16
Reference for Start Up: Controller Operation ......................................... Page 17
Initial Start Up ................................................................. Page 18
Ice Thickness and Water Purge Adjustment .......................................... Page 19
Cleaning, Sanitation and Maintenance .............................................. Page 20
Operational Characteristics 1200 lb system .......................................... Page 22
Operational Characteristics 1800 lb system .......................................... Page 23
What to do before calling for service: ............................................... Page 24
EH330 or EH430 Schematic Diagram ............................................... Page 25
EH330 or EH430 Wiring Diagram .................................................. Page 26
ECC 3 Phase Schematic Diagram ................................................. Page 27
ECC 3 Phase Wiring Diagram ..................................................... Page 28
ECC 1 Phase Schematic Diagram ................................................. Page 29
ECC 1 Phase Wiring Diagram ..................................................... Page 30
October 2014
Page 1
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Conguration
A remote low side cuber system includes two
sub systems: an ice head section and a remote
condensing unit. Additionally, there are several
models of each sub-system and this manual covers
all of them.
The ice making sections are designed for use indoors
in a controlled environment. The remote condensing
units are designed to operate outdoors. Each subsystem has limits for power, water and temperature.
Operational Limitations:
Minimum Maximum
Air Temp (IH) 50oF 100oF.
Air Temp (CU) -20oF. 120oF.
Water Temp 40oF. 100oF.
Water Pressure 20 psi 80 psi
Water Conductivity 10 microSiemens/cm
Voltage (IH) 104 126
Voltage (CU) 198 253
IH = Ice Head, CU= Condensing Unit
Warranty
Refer to the warranty coverage in effect when the
equipment was sold. Warranty statements are
included with each product.
Systems:
Each sub-system is a separate entity that carries
its own model and serial number. They must be
combined to create a remote cuber low side system.
Notes: Voltage Codes are at the end of the model
number. Codes read Voltage/Hertz/Phase. Those
related to these products include:
-1 = 115/60/1
-3 = 208-230/60/3
-32 = 208-230/60/1
Tubing kits are required to interconnect the head to
the CU
Do Not operate the machine in conditions beyond
• 20 foot: 3BRTE20-EH,
these limitations. Doing so will void the warranty.
• 35 foot: 3BRTE35-EH
Scotsman ice systems are designed and
manufactured with the highest regard for safety and
• 50 foot: 3BRTE50-EH
performance. They meet or exceed the standards of
UL and NSF.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
• 75 foot: 3BRTE75-EH
Interconnecting 24 volt control wire ships in the
condensing unit.
that have been altered in any way, including the use
of any part and/or other components not specically
approved by Scotsman.
Scotsman reserves the right to make design changes
and/or improvements at any time. Specications and
design are subject to change without notice.
System Information
Prodigy Eclipse
System Size
1200 ECC1200-32A 208-230/60/1 EH330SL-1D or EH330ML-1D 115/60/1
1400 ECC1410-32A 208-230/60/1 EH430SL-1D or EH430ML-1D 115/60/1
1400 ECC1410-3A 208-230/60/3 EH430SL-1D or EH430ML-1D 115/60/1
1800 ECC1800-3A 208-230/60/3 EH430SL-1D or EH430ML-1D 115/60/1
Condensing Unit (CU) Ice Making Head (IH)
Model Electrical
Model Electrical
(volts/Hz/phase)
(volts/Hz/phase)
October 2014
Page 2
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Technical Specications
Model Electrical
(volts/Hz/phase)
EH330SL-1D 115/60/1 3 15 - 30 x 24 x 23 130
EH430SL-1D 115/60/1 3 15 - 30 x 24 x 29 165
ECC1200-32 208-230/60/1 17.8 30 224 32 x 39 x 39.75
ECC1410-3 208-230/60/3 9.1 20 224 32 x 39 x 39.75
ECC1410-32 208-230/60/1 14.5 30 224 32 x 39 x 39.75
ECC1800-3 208-230/60/3 19.0 30 232 32 x 39 x 39.75
* See Cabinet Drawings for exact dimensions.
Location Limitations
Maximum Distance between Head and Condensing
Unit: Limited to the length of the longest available
single tubing kit, 75 feet.
Maximum Condensing Unit Elevation over Ice Making
Head: 35 feet.
Note: Elevations greater than 20 feet require
installation of a suction line trap at the 20 foot mark.
Minimum
Circuit
Ampacity
Maximum
Fuse Size
Condensing unit
The dataplate on the condensing unit contains the
model number, serial number, electrical data and
system refrigerant charge.
A second plate, located behind the front panel in front
of the compressor, also lists the model number, serial
number and refrigerant charge.
System
Charge oz of
R-404A
Cabinet Size*
w” x d” x h”
Approx. Unit
Weight (lb)
Maximum Ice Making Head Elevation over
Condensing Unit: 15 feet.
Line Routing:
• Allowed: One rise after a drop.
• Allowed: One drop after a rise.
• Not Allowed: More than one rise after a drop
• Not Allowed: More than one drop after a rise.
Model Number Locations
Ice Making Head
The dataplate on the back of the ice machine contains
the model number, serial number and electrical data.
A second plate, located behind the front panel at
the lower right front, also lists the model and serial
numbers.
October 2014
Page 3
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Cabinet Drawings, EH330 Ice Making Head
762
30.00
15.50
393.70
9.63
244.60
MINIMUM BIN
TOP OPENING
18.30
464.82
ICE DROP OPENING
24.00
609.60
9.00
228.60
PLAN VIEW
2.00
50.80
30.70
779.88
20.90
530.86
23.00
584.20
190.50
7.50
6.03
153.16
762
38.23
30.00
24.00
609.60
1.51
UTILITY
FRONT VIEW
LEFT SIDE VIEW
CASE
5.58
141.73
3.73
4.35
94.72
110.46
October 2014
Page 4
3/8" LIQUID LINE
1/2" COOL VAPOR LINE
3/4" SUCTION LINE
3/8" FPT
WATER
INLET
ELECTRICAL CORD
ACCESS HOLE
17.66
448.56
15.03
381.76
432.56
12.35
313.69
17.03
56.64
2.73
69.32
3/4" FPT
DRAIN
2.23
88.62
3.49
703.20
ACCESS HOLE
INFERFACE CABLE
27.69
BACK VIEW
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Cabinet Drawings, EH430 Ice Making Head
762
30.00
9.63
244.60
ICE DROP OPENING
9.00
228.60
30.70
779.88
29.00
736.60
762
30.00
FRONT VIEW
15.50
393.70
MINUMUM
TOP OPENING
5.58
141.73
464.82
4.27
108.46
18.30
609.60
93.98
3.70
24.00
3/4" SUCTION LINE
3.35
85.06
PLAN VIEW
2.00
50.80
3/8" LIQUID LINE
1/2" COOL VAPOR LINE
26.84
681.74
23.65
600.71
21.01
533.62
9.00
228.60
477.01
18.78
8.51
216.15
38.23
56.64
88.62
24.00
609.60
1.51
UTILITY
2.23
3.49
CASE
LEFT SIDE VIEW
INFERFACE CABLE
ACCESS HOLE
ELECTRICAL CORD
ACCESS HOLE
3/8" FPT
WATER
INLET
October 2014
Page 5
20.03
508.76
3/4" FPT
DRAIN
27.70
703.58
BACK VIEW
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Cabinet Drawings, ECC Condensing Unit
TOP VIEW
992.81
39.09
814.22
32.06
FRONT VIEW
32.05
1.26
TYP.
1009.65
39.75
887.73
34.95
.88" ELECTRICAL INLET
1/2" COOL VAPOR LINE
3/4" SUCTION LINE
3/8" LIQUID LINE
83.67
3.29
SIDE VIEW
LINE SET AND ELECTRICAL ATTACHMENT SIDE
330.86
13.03
74.12
2.92
163.02
6.42
248.87
9.80
750.06
29.53
491.69
19.36
INTERFACE HARNESS
ACCESS HOLE
63.50
2.50
October 2014
Page 6
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Pre-Installation Details
Note: The ice making head cannot be stacked
vertically.
Accessories such as bin adapters and tubing kits are
required to complete the installation.
Dispenser Adapter Kits:
• Scotsman ID200 or ID250: KBT44
Bin Adapter Kits:
• B948S: KBT22A
Tubing Kits:
• 20 foot: 3BRTE20-EH
• 35 foot: 3BRTE35-EH
• 50 foot: 3BRTE50-EH
• 75 foot: 3BRTE75-EH
Note: Line set may have quick connects. See
refrigeration system detailed instructions connection
details.
Items required for installation:
Water
Pure water does not exist. All water supplies contain
some amounts of impurities, although potable water
is, by denition, t for human consumption. Because
the contents of the water to an ice machine directly
impact its performance, consideration should be given
to improving the water’s quality.
There are two ways water can contain impurities:
in suspension or in solution. Suspended solids can
be ltered out of the water. In solution or dissolved
solids must be diluted or treated. Water lters are
recommended to remove the suspended solids.
Some lters or lter systems have treatment
chemicals in them for treating the suspended solids.
This ice machine has an adjustment for the amount
of water rinsed or purged. Water use adjustments
are customer convenience adjustments; they are not
factory defects and are not covered by warranty.
• Ice making head
• Condensing unit (includes interconnecting control
system wire)
• Tubing kit. 20’, 35', 50’ or 75’ triple line set (liquid,
vapor and suction)
• Bin or dispenser adapter
Special Considerations
The ice making section’s footprint is 30” wide by 24”
deep plus another 1.5” for a utility chase on the back
panel. The refrigeration connections can be made to
go up or out the back by bending the line set tubing.
The electrical power cord and the water inlet line can
also be routed through either of those areas. The
drain may be routed out the back or to the left side.
October 2014
Page 7
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
Create the System
Plan the installation. The system consists of three
parts: the ice making head, the condensing unit and
the interconnecting tubing. Of these, the biggest
variable is the interconnecting tubing.
Tubing: The tubing consists of three insulated and
sealed soft copper tubes. One tube, the liquid line,
is 3/8” OD. The vapor tube is ½” OD and the suction
tube is ¾” OD. A site inspection will determine what
length of tubing is required for the installation.
In 2013 Scotsman made a change to the Eclipse
tubing kits:
• Prior Tubing Kits: They each contain a small
holding charge of R-404A and have quick
connects at the ends.
• Current Tubing Kits: The do not contain any
refrigerant and do not have quick connects.
Either type can be used to connect the head and
condensing unit.
Quick Connect type: Check ice making head and
condensing unit for quick connects. If none, recover
refrigerant from tubing and cut the quick connects off.
Condensing Unit: Electrical power must be supplied to
the condensing unit, it will be separate from the head.
The remote tubing connections are at the top of the
machine, and connections should not be made until
the machine is nearly in its nal installed position.
The 115/60 Hz ice making section is cord connected
and requires an outlet within 6 feet of the installation.
Interconnecting wires: A low voltage interconnecting
wire harness is included with the condensing unit.
One end plugs into the ice making head and the other
into the condensing unit. The system will NOT operate
without this harness.
Exposed tubing: Minimize the amount of tubing
exposed outdoors.
If the head or condensing unit has a quick connect,
recover refrigerant and only cut off the quick connect
at the system with the stub connections.
Tubing without quick connects: Check head and
condensing unit, if neither have quick connects, use
as is. If one or both do, obtain kit KTE6 to add quick
connects to the line set.
Excess tubing must be shortened at the job site.
Installations with greater than 20 feet of vertical lift
between ice machine and the compressor require
a suction line trap. The suction line requires careful
handling and large radius bends to prevent kinking.
Roof mounting: Some installations will require the use
of a hoist to lift the components to the roof.
Pad mounting: The condensing unit may be located
below the ice making section, up to a limit of 15 feet.
Distance from unit: Limited to the length of the
available tubing.
Elevation: Condensing unit limited to 35 feet above
the ice making head.
October 2014
Page 8
EH330, EH430 D and ECC Condensing Unit
Remote Low Side Cuber User Manual
System Example
October 2014
Page 9
Loading...