Scotsman DCE33PA1SSD, DCE33A1SSD Dimension Guide

Custom Door Panel Dimensions

Scotsman DC33, DCE33, Companion Refrigerator

1 3/4"

14 3/4"

Space to access handle

0 3/4"

Raised

26 15/16"

Section

Raised Section

28 15/16"

0 1/4"

Can be used with factory provided handle

0 1/4"

7/32 in

1/8 in

13/32 in

3/16 in

1/4 in

1/16 in

15.0 in

29.0 in

3/4"

Scotsman Custom Overlay Panel Spec

Use to make a drop in door panel that covers the door and the front of its aluminum edge. Add the KHAND to cover the top edge and a cabinet pull that matches the pulls at the installation to better blend in with the existing cabinetry.

Cut the filler panel to the dimensions shown. Apply the edge detail to the bottom, left and right sides.

The following directions are for a 3/4" x 15"w x 29"h panel door blank:

Edge Detail, for bottom and sides

1. From the back side of the door cut a 1/16"w x 11/32" h rabbet on both sides and the bottom edge of the panel.

2. Set the saw blade to 1/4" height and cut groove in the edge of the door 7/32 from the back of the door.

3.On the hinge side of the door cut a 45 degree chamfer on the top with either a saw or a router.

Top

Panel must be

within these

dimensions

Hinge

Chamfer

Back of door

Slot for

door

frame

Bottom View

and

Must weigh no

more than 5 lb.

Front View

Bottom

KHAND

Side View

Custom Cabinet Door Insert for Models DCE33 or Companion Refrigerator (Black or White Only)

for Scotsman Information: www.scotsman-ice.com - 800-533-6006